Watermelon Kiwi Al Fakher Hypermax Prime 50K Prefilled Pod Kit

Watermelon Kiwi Al Fakher Hypermax Prime 50K Prefilled Pod Kit

Two sealed 10ml containers feed a 2ml pod module in the Watermelon Kiwi Al Fakher Hypermax Prime 50K Prefilled Pod Kit, which carries a puff ceiling of up to 50,000. A 1000mAh battery sits in the base, and a 0.6Ω mesh coil is housed in the replaceable Snap Dual module.

Watermelon Kiwi is the sole flavour on offer, supplied as 20mg/ml nicotine salt, in 1, 5 or 10 complete kits. Airflow is adjusted between a restricted and an open lung draw, and no button is fitted because heating is started by inhaling. Once the containers run dry, a Hypermax Prime 50K refill pack is fitted in their place.

What to Know About the Watermelon Kiwi Hypermax Prime 50K Kit

• Up to 50,000 puffs, dropping with longer draws
• 2 x 10ml containers feeding a 2ml pod module with a 0.6Ω mesh coil
• Watermelon Kiwi nicotine salt at 20mg/ml
• Charging by USB-C into a 1000mAh cell, cable not included
• Takes Hypermax Prime 50K refill pods only, not 30K or Crown Bar systems

Features of Watermelon Kiwi Al Fakher Hypermax Prime 50K Prefilled Pod Kit

Sealed containers mean no e-liquid is handled at any point, and the kit is filed in the Prefilled Pod Kits collection. The puff rating, coil module, flavour, battery, and draw controls are covered below.

Up to 50,000 Puffs

The 50,000 figure is a ceiling that depends on draw duration and output mode. Longer, wider pulls drain the containers sooner, so totals vary between users. The count applies to one set of containers, and later sets are run from the same battery. More devices rated in the tens of thousands of puffs are listed under Big Puff Vapes.

Snap Dual Mesh Module

The Snap Dual module holds a 0.6Ω Big Cloud v2.0 mesh coil and a 2ml chamber, and the Flow Sense system regulates how e-liquid reaches the coil from the two containers. No separate coil has to be bought, fitted or primed. The containers click into the module, and the module is then docked onto the battery. A fresh module is supplied with every refill pack, so the coil is renewed whenever the e-liquid is.

Watermelon Kiwi Flavour

Both containers are filled with Watermelon Kiwi, which pairs light, thirst-quenching red watermelon juice with the tart, slightly acidic bite of sliced green kiwi. Any other flavour from the Prime 50K range can be fitted to the same battery later, so the taste is changed while the hardware stays put. Shoppers looking for a Watermelon Kiwi 50 K vape will find it in this kit.

1000mAh USB-C Battery

A 1000mAh rechargeable cell is built into the base and charges via USB-C, with Quick Charge 2.0 support. The charging cable has to be bought separately. Battery percentage and pod activation status are shown on the Silk Glow LED screen, and only the module and containers are swapped at refill time.

Draw Activation and Adjustable Airflow

An internal airflow switch starts the heating when you inhale, so there are no buttons, menus or settings to learn. Airflow is changed with a mechanical slide switch on the battery unit, which moves the draw from RDL (restricted direct-to-lung) towards DTL (direct-to-lung). The wide-bore mouthpiece is built for open, dense vapour rather than a tight cigarette-style pull.

How to Set Up the Watermelon Kiwi Hypermax Prime 50K Kit

Nothing needs filling. Both containers are pressed into the module, and the module is then docked onto the battery.

Step 1: Peel the protective silicone bungs and seals from the base unit, the module, and both containers.

Step 2: Press the two 10ml containers into the tracks of the Snap Dual module until they click flush.

Step 3: Dock the assembled module into the battery housing.

Step 4: Wait 2 to 3 minutes with the kit upright, by which time the mesh coil is wetted through.

Step 5: Inhale to start. Airflow is set with the slide switch on the battery unit, and a USB-C top-up is needed once the Silk Glow screen shows a low charge.

What's in the Watermelon Kiwi Hypermax Prime 50K Kit Box

Four items make up each kit, and several complete kits are held in the larger pack sizes.

• 1 x 1000mAh rechargeable battery
• 1 x Snap Dual module with the mesh coil inside
• 2 x 10ml containers prefilled with Watermelon Kiwi
• 1 x user manual

A charging cable and spare refill packs are not part of the box.

Refill Packs Compatible With the Watermelon Kiwi Hypermax Prime 50K Kit

Only Hypermax Prime 50K refill pods are matched to this battery. A new module and two 10ml containers are contained in each pack, and any flavour in the range fits, Watermelon Kiwi included. With these packs, the same battery stays in use in the Hypermax Prime vape, and the full selection is grouped under Replacement Pods.

Crown Bar systems and Hypermax 30K pods are built differently and are not interchangeable with this kit. The wrong pack is avoided by matching the Prime 50K name exactly, and bottled e-liquid cannot be used because only sealed packs fit.

About Al Fakher and the Hypermax Prime Range

Within the Hypermax line, the number in a product name shows which pod system it belongs to. The Prime 50K runs on a dual-container Snap Dual chassis, whereas the 30K products use a single-cartridge dock that shares no parts with it.

Watermelon Kiwi is one flavour on that Prime platform, supplied here as a TPD-compliant complete kit. Comparable prefilled hardware from other makers can be browsed under Big Puff Pod Kits.

Stock Up and Delivery

A second Watermelon Kiwi pack is worth adding for when the first containers run out. A cable from Chargers And Cables is also needed, since the kit is not supplied with one.

Same-day Tracked 24 dispatch is open to weekday orders until 3:30 pm, and orders after that time follow on the next working day. Savings on several kits sit in Multi-Buy Vapes. Orders from under-18s are stopped by the age verification step at the Pirate Vapes checkout.

Conclusion

Adults who like fruit flavours and want a button-free prefilled kit will find a long-running option in this Al Fakher watermelon kiwi vape, which keeps one battery across every refill pack. Only Hypermax Prime 50K refill pods are fitted to it.

Other rechargeable devices to compare are collected in Rechargeable Vapes, and Pirate Vapes carries the wider catalogue.

FAQs

How many puffs does the Watermelon Kiwi Al Fakher Hypermax Prime 50K Prefilled Pod Kit give?

The quoted ceiling is 50,000 puffs per set of containers. That is an upper-limit figure subject to draw duration and output mode, so longer or wider-open draws will drain the liquid sooner and give a lower total.

What is in the box with the Watermelon Kiwi Hypermax Prime 50K kit?

Supplied are a 1000mAh battery, a Snap Dual module with the mesh coil inside, two 10ml Watermelon Kiwi containers, and a user manual. The charging cable is bought separately.

Which refill pods fit the Watermelon Kiwi Al Fakher 50k vape?

Hypermax Prime 50K refill pods fit, whatever the flavour. Every pack carries a new module and two 10ml containers, and Hypermax 30K pods or Crown Bar systems cannot be fitted.

Does the Watermelon Kiwi Hypermax Prime 50K kit have a button?

No button is fitted. Heating starts as soon as you inhale, and the only adjustment is the slide switch on the battery unit, which opens the airflow from restricted to full direct-to-lung.

How is the Watermelon Kiwi Hypermax Prime 50K kit charged?

Charging goes through the USB-C port of the 1000mAh battery, with Quick Charge 2.0 listed, using a cable that is not included. The remaining charge is shown on the Silk Glow screen.

What is the difference between Pack Of 1, Pack Of 5 and Pack Of 10 for the Watermelon Kiwi kit?

Pack size is the count of individual retail kits supplied. Each kit in a larger pack has its own battery, module, and two Watermelon Kiwi containers, and the flavour is the same throughout.