Aspire BVC Clearomizer Replacement Coils

Old school and still going. The Aspire BVC clearomiser coils are bottom vertical coil heads built for Aspire's classic pen-style MTL Tanks: the K1, the CE5-S, the ET-S, and similar clearomiser models from that era. Three resistance options in the store picker, all above 1ohm, all running at low wattage between 7 and 14W.

Organic cotton wicking, threaded installation, and best paired with 50/50 or higher-PG e-liquids. Pack of five. If your Aspire clearomiser still works and just needs a fresh coil, this is it.

Why vapers choose the BVC Clearomizer Coils:

• The BVC design was Aspire's breakthrough in vertical coil engineering, and it still delivers clean, reliable MTL flavour in the clearomiser tanks it was made for

• Organic cotton wicking gives smoother flavour than the silica wicks used in older clearomiser coils from the same era

• Three resistance options let you adjust how warm or cool your draw feels without changing any device settings

• Low wattage at 7-14W barely touches battery life, which matters on the compact pen batteries these tanks typically sit on

• A pack of five is practical since these coils need changing regularly with daily MTL use

Aspire BVC Clearomizer Replacement Coils Features

What BVC Actually Means

Bottom Vertical Coil. The coil sits vertically inside the housing rather than horizontally, which was a big deal when Aspire first introduced it. Vertical positioning lets the wick feed liquid more efficiently from both sides, reducing dry hits and giving a more even burn. Older Aspire clearomisers used BDC (dual coil) designs that burned through liquid unevenly. The BVC was the fix.

Cotton Over Silica

Earlier versions of Aspire clearomiser coils used silica wicking. If you remember that slightly plasticky taste on the first few draws of a new coil, that was silica. The BVC coils use organic cotton instead. Flavour comes through cleaner from the first fill, and the break-in period is shorter. Small change, noticeable improvement.

Built for Thinner Liquids

These wicking ports are sized for 50/50 VG/PG or thinner. That is intentional. The clearomiser tanks they fit have narrow feed channels and low wattage output, so thick high-VG juice will not wick properly and you will get dry hits within minutes. Stick with 50/50 or higher-PG blends, and they perform well. Worth pairing with nic salts at 10-20mg if you prefer salt-based nicotine.

Wattage That Barely Registers

Running between 7 and 14W depending on resistance. That is barely noticeable on a battery. If you carry a pen-style Aspire device to work and vape through the day, the low power draw means you are not charging every few hours. These coils were designed for a time when batteries were small, and wattage was measured in single digits. That engineering still works.

Threaded and Familiar

Screw-in installation. If you have been using Aspire clearomisers for any length of time, you already know how this works. Unscrew from the base, screw in a fresh one. No press-fit, no magnets, no alignment issues. Simple and reliable.

Aspire BVC Clearomizer Replacement Coils Resistance Options

Three options in the store picker. All MTL, all low wattage. The choice comes down to warmth and throat feel.

Most popular: the 1.6ohm. Runs slightly warmer than the 1.8 and delivers a bit more throat hit. Good match for mid-strength freebase liquid and vapers who want a cigarette-style draw with some substance to it.

Balanced middle ground: the 1.8ohm. Aspire lists this as one of their standard BVC resistances. Cooler than the 1.6, works across a range of nicotine strengths without leaning too strongly in either direction. If you are not sure which to pick, this is a safe starting point.

Lowest in the range: the 1.2ohm. Warmer draw, slightly more vapour production. Closer to the lower end of the MTL spectrum. Works well at around 12-14W if your device reaches that.

#buttons

• 1.2ohm
• 1.6ohm
• 1.8ohm

How to Set Up the Aspire BVC Clearomizer Replacement Coils

Straightforward threaded swap. A couple of minutes.

1. Unscrew the base of your Aspire clearomiser tank from the battery section.

2. Unscrew the old BVC coil from the base. It threads out anticlockwise.

3. Take a fresh coil from the pack. Put two to three drops of e-liquid onto the cotton visible through the side ports.

4. Screw the new coil into the base clockwise until finger-tight. Do not overtighten.

5. Reassemble the tank, fill with e-liquid, and let it soak for at least eight to ten minutes while the cotton absorbs from the base upward.

6. Take a couple of gentle dry pulls (inhale without pressing the fire button) to help draw liquid into the wick. Then start vaping at low wattage.

What's in the Aspire BVC Clearomizer Replacement Coils Box

Five coils in your selected resistance. No e-liquid, no tank, no battery. Just the coils.

The Coil That Fits Aspire's Classic Clearomiser Tanks

The BVC clearomiser coil is exclusive to Aspire's older pen-style clearomiser Vape Tanks. That means the K1, the CE5-S, and the ET-S primarily. Other Aspire clearomisers from the same generation that use the BVC threading system will also accept these coils.

What they do not fit: anything from the Nautilus family, the Atlantis range, the Cleito series, or any of Aspire's modern pod and mesh systems. Each of those runs on a completely different coil platform. If the coil currently in your tank says "BVC" on it and screws in from the bottom, you are in the right place.

About Aspire

The BVC coil was one of Aspire's defining contributions to vaping hardware. When it launched, most clearomiser tanks used horizontal dual-coil designs that burned unevenly and gunked up quickly. Aspire's vertical coil approach improved airflow over the wick and gave noticeably cleaner flavour.

That single innovation helped make the Aspire Range one of the most trusted names in early UK vaping. The BVC clearomiser coils are a legacy product now, but for vapers still running those original tanks, they remain the genuine replacement.

Stock Up and Save

Five coils per pack. At daily MTL use, you will go through one every week or so, sometimes longer with lighter vaping habits. Picking up two packs at once covers you for well over a month and means you are not scrambling when the flavour drops off.

Every order from Pirate Vapes ships the same day before 4 pm in padded packaging. All stock is TPD compliant, with an age-verified checkout and over-18s only. Free Pirate Post on orders over £25.

Conclusion

The BVC clearomiser coils are a niche product in 2026, but they serve a real purpose. If you own one of Aspire's classic pen-style tanks and it still does the job, a fresh five-pack of genuine BVC heads is the cheapest and simplest way to keep it running.

Three resistances, organic cotton, and low-wattage MTL vaping that does exactly what it always did. Browse more Aspire Coils and vape accessories at Pirate Vapes.

FAQs

Which tanks do the BVC clearomiser coils fit?

Aspire's classic pen-style clearomisers. The K1, CE5-S, and ET-S are the main ones. They will not work in Nautilus, Atlantis, Cleito, or any modern Aspire pod system.

What e-liquid ratio works best?

50/50 VG/PG or higher-PG blends. These coils are not built for thick high-VG juice. The wicking ports are narrow, and the wattage is low, so anything above 50/50 risks dry hits.

How long do the BVC coils last?

About a week with daily MTL use. Lighter vapers might stretch that to ten days. Sweeter liquids will shorten the lifespan as sugar residue builds up on the cotton faster.

Can I use nic salts with BVC coils?

Yes. The tight MTL draw and low wattage suit nic salts well. Use 50/50 nic salts at 10-20mg for the best results. The coil does not care whether it is salt or freebase. It cares about the liquid ratio.

What is the difference between BVC and BDC coils?

BVC is Bottom Vertical Coil; BDC is Bottom Dual Coil. The BVC replaced the BDC in Aspire's clearomiser range. Vertical orientation feeds liquid more evenly and produces cleaner flavour. If your tank came with BVC coils, stick with BVC replacements.