Aspire BP Replacement Coils

Four coils that split neatly into two camps. The 0.17 ohm and 0.3 ohm are mesh, built for warmer draws and bigger clouds at 30 to 55W. The 0.6 ohm and 1.0 ohm are standard wire, built for tighter MTL pulls at lower wattage.

Between them, the BP platform covers a huge chunk of Aspire's current line-up: the BP Stik, Rhea X, Veynom, BP 80, Huracan and Revolto all take these coils. Press-fit. Organic cotton. Sold in packs of 5. Pirate Vapes ships them age-verified across the UK.

Why vapers choose this:

• One coil platform across multiple Aspire kits, so spares carry between devices.

• Two mesh options for richer flavour and bigger clouds at higher wattage.

• Two standard options for a tighter MTL draw at battery-friendly wattage.

• Press-fit installation, no threading, no tools.

• Five to a pack, covering most vapers for a month or more.

Aspire BP Replacement Coils Features

Mesh for Clouds, Standard for MTL

The distinction matters. The 0.17Ω and 0.3Ω mesh coils heat across a wide strip, which means faster ramp-up, denser vapour and richer flavour at 30W and above. The 0.6Ω and 1.0Ω standard coils use a traditional wire wrap for a tighter, cooler, more cigarette-like draw at lower power. Same platform, genuinely different vape.

Wide Wattage Spread

The 1.0Ω runs at just 10 to 16W. The 0.17Ω runs at 45 to 55W. That is a massive range from a single coil family, and it means one Aspire device (if it has the wattage) can go from discreet MTL to proper DTL clouds just by changing the coil. Not many platforms offer that kind of flexibility.

Cross-Device Compatibility

This is the selling point. The BP coil presses into several Aspire pods and tanks: the BP Stik pod, the Huracan Mini (on the Rhea X), the BP 80 pod, the Veynom pod and the Huracan tank. If you own more than one Aspire device from this list, your coil stock covers all of them.

Press-Fit, Quick Swap

The coil pushes into the base of the pod or tank and holds by friction. No screwing, no aligning threads. Pull the old one straight out, push the new one straight in. The fit is firm enough to stay put during use and loose enough that a gentle tug removes it.

Organic Cotton, Proven Build

The wicking is organic cotton throughout, which handles heat cleanly and produces neutral, clear flavour. Nothing exotic, just a reliable material that does its job and does not add any taste of its own.

Aspire BP Replacement Coils Resistance Options

No flavour to choose. These are empty coils that sit inside your pod or tank, and you fill the device with your own juice. Four options.

Mesh coils (bigger vapour, higher wattage):

• 0.17 ohm - mesh, 45 to 55W, warm DTL clouds, suits 70-30 Shortfills or High VG E-Liquid

• 0.3 ohm - mesh, 30 to 40W, a balanced RDL draw with good flavour

Standard coils (tighter draw, lower wattage):

• 0.6 ohm - standard wire, 15 to 25W, a comfortable MTL-to-RDL crossover

• 1.0 ohm - standard wire, 10 to 16W, tight MTL, suits Nic Salts or 50-50 E-Liquid

Match the juice to the coil: high-VG for the mesh options, thinner mixes for the 0.6Ω and 1.0Ω. Browse our E-Liquids collection for the right pairing.

How to Set Up the Aspire BP Replacement Coils

1. Remove the pod or unscrew the tank base and pull the old coil straight out.

2. Push the new BP coil firmly into the base until it clicks or seats flush.

3. Put a little juice on the cotton visible through the side openings to get the wick started.

4. Reassemble, fill with e-liquid, and leave it sitting for three to five minutes before the first puff.

5. Start at the low end of the coil's wattage range and work up over the first few draws.

What's in the Aspire BP Replacement Coils Box

Five coils in the resistance you choose. No pod, no device, no e-liquid. Grab a bottle of Nic Salts for the 1.0Ω or a 70-30 Shortfill for the 0.17Ω.

Fits the Aspire BP Stik, Rhea X, Veynom, Huracan and More

You will find the coils and the kits in our Aspire Vapes collection, with the full range in Vape Coils.

About Aspire

Aspire has been making coils longer than most vape brands have existed. The Nautilus BVC was one of the first coils that people actually liked, and the BP platform carries that thinking forward: reliable materials, clean flavour, and a coil that covers more than one device.

The BP range is not as large as VooPoo's PnP or Innokin's Z-Coil, but what it does cover, it covers well. For anyone running a BP Stik, Rhea X or Veynom, genuine Aspire coils are the way to keep the flavour consistent.

Stock Up and Save

The 1.0Ω and 0.6Ω sip power and last a good stretch. The 0.17Ω burns hotter and gets through juice faster, so budget for a coil a week at higher wattages.

Either way, a 5-pack keeps you going, and pairing it with juice from our Multibuys page covers both sides of the cost. Genuine Aspire, dispatched tracked, age-verified checkout. Over 18s only.

Conclusion

Four coils. Two mesh for clouds. Two standard for a tight draw. One press-fit that covers half a dozen Aspire kits. The BP platform is not the widest coil range on the market, but the spread from 10W MTL to 55W DTL is genuinely useful, and the cross-device compatibility means your spares stretch across multiple devices.

Pick the resistance, match the juice, and go. Grab a 5-pack from Pirate Vapes with fast, age-verified UK delivery.

FAQs

Which resistance is best for MTL?

The 1.0Ω at 10 to 16W is the tightest, most cigarette-like draw. The 0.6Ω at 15 to 25W is a step looser with a bit more warmth. Both suit nic salts.

Are all four coils mesh?

No. The 0.17Ω and 0.3Ω are mesh. The 0.6Ω and 1.0Ω are standard wire. The mesh coils produce more vapour and run at higher wattage.

Will the 1.0Ω fit my Revolto or Huracan EX?

No. The 1.0Ω and 0.6Ω fit the BP Stik, Rhea X, Veynom and BP 80 only. The Revolto and Huracan EX/LX use the larger Huracan tank and take the mesh coils (0.17Ω, 0.3Ω) plus the BP Pro and BP-F ranges.

What juice should I use?

High-VG (70%+) for the 0.17Ω and 0.3Ω mesh coils. Nic Salts or 50-50 E-Liquid for the 0.6Ω and 1.0Ω. The bottle will tell you its ratio.

How long does a coil last?

One to two weeks of regular use. The 1.0Ω tends to last longest because it runs at the lowest power. Sweet juices shorten the life of any coil.

Are these the same as BP-F coils?

No. BP-F coils are a newer range designed specifically for the Revolto and H2 Tank. They look similar but are not interchangeable with standard BP coils.