Aspire Loomix Vape Pod Kit

A zinc alloy body with a leather-grip back panel, 1,500mAh battery, 2A USB-C fast charging, adjustable side airflow, and a segment display that shows battery level at a glance. The Aspire Loomix is a button-fired Refillable Pod Kit that covers MTL and restricted DTL vaping from a single device. 

Five mesh pod resistances available across the Loomix range: 0.4ohm, 0.6ohm, 0.8ohm, 1.0ohm, and 1.2ohm. The UK TPD kit ships with a 0.8ohm mesh pod preinstalled at 2ml capacity. Two wattage modes, ECO and MAX, are switched with a triple press of the button. Four colours. Over 18s only. Browse the full Aspire Range at Pirate Vapes.

Why vapers choose this:

• 1,500mAh battery with 2A fast charging is comfortably above average for a pod kit this size. Most days you will not need to charge at all, and when you do, it tops up fast.

• Five mesh pod resistances covering tight MTL at 1.2ohm through to restricted DTL at 0.4ohm. Same device, dramatically different draw styles depending on which pod you drop in.

• Adjustable side airflow matched to each coil resistance. Open it wide for the 0.4, tighten it down for the 1.2. That level of airflow control is not common on pod kits.

• Zinc alloy body with leather-style grip feels genuinely solid in the hand. Not the lightweight plastic shell most pod kits use at this price.

• ECO and MAX modes let you switch between lower-power battery saving and full output with a triple press. No menus, no screens to navigate.

Aspire Loomix Vape Pod Kit Features

Button Control in a World of Draw-Activated Pods

Most pod kits in 2026 are inhale-activated. The Loomix uses a physical fire button instead. That is a deliberate choice from Aspire, and it matters more than it sounds. Button firing gives you precise control over when the coil fires and for how long. 

No accidental activation in your pocket. No weak draws that barely register on a draw sensor. Press the button, the coil fires. Release it, it stops. If you have been frustrated by inconsistent draw activation on other pod kits, this fixes that. The button also handles power on/off (five clicks) and ECO/MAX switching (triple press).

That 1,500mAh Battery Is Serious for This Form Factor

At 109mm tall and 15mm thick, the Loomix is a compact pod kit. Fitting a 1,500mAh battery inside that body is noteworthy. For context, the Vaporesso XROS runs 1,000mAh. The OXVA Xlim sits around 900mAh. The Caliburn G3 Pro is 1,000mAh. The Loomix outpaces all of them. 

In MTL use at 0.8ohm or above, that translates to a full day and then some before charging. And when you do plug in, the 2A charge current means you are back to full faster than the standard 1A charging most competitors use.

Adjustable Side Airflow That Actually Changes the Draw

A slider on the side of the device controls how much air flows through the pod. Fully open, the draw loosens into RDTL territory with the 0.4ohm pod. Closed down, it tightens into a firm MTL pull that suits the 1.0ohm and 1.2ohm pods with nic salts at 10-20mg. 

Aspire recommends matching the airflow setting to each pod's resistance, and the difference between open and closed is genuinely pronounced. This is not a token airflow dial. It meaningfully changes how the device draws.

ECO and MAX: Two Wattage Levels, One Triple Press

Triple-press the fire button, and the Loomix switches between ECO and MAX mode. ECO runs at lower wattage for a cooler, softer draw that conserves battery and extends pod life. MAX pushes the output higher for warmer vapour and denser flavour. 

The segment display shows which mode you are in. No wattage numbers to set, no plus and minus buttons to fiddle with. Two levels, one toggle.

Zinc Alloy Build With Leather-Style Back Panel

The body is zinc alloy, not plastic. You feel the difference the moment you pick it up. It has weight. It has density. The leather-style panel on the back adds grip and texture without making the device bulky. Aspire has positioned the Loomix as a more premium-feeling pod kit than most of the lightweight plastic devices in the MTL Pod Kit category, and the materials support that.

Aspire Loomix Vape Pod Kit Colours

Four finishes. All use the same zinc alloy body with a leather-style back panel.

#buttons

• Gunmetal
• Purple Gold
• Pearl White
• Midnight Black

How to Set Up the Aspire Loomix Vape Pod Kit

1. Charge the device using the included USB-C cable. The segment display will show a full battery indicator when complete. The 2A charge current means this is faster than you might expect.

2. Open the top-fill port on the preinstalled 0.8ohm pod and fill with your chosen 50/50 VG/PG or higher-PG e-liquid to just below the max line. Close the port securely.

3. Leave the filled pod sitting in the device for three to four minutes. The mesh coil needs to soak. Aspire's mesh wicks efficiently, but rushing this step will burn the cotton on your first draw and ruin the pod.

4. Press the fire button five times rapidly to power the device on. The segment display will light up, showing your current battery level and mode.

5. Adjust the side airflow slider to your preference. For the 0.8ohm pod, a mid-range setting works well. Tighten for firmer MTL, open for a slightly looser draw.

6. Hold the fire button and inhale. Start gently. If you want to switch between ECO and MAX mode, triple-press the button while the device is on.

What's in the Aspire Loomix Vape Pod Kit Box

• One Aspire Loomix device in your chosen colour. 

• One 0.8ohm mesh pod (2ml, preinstalled). 

• One USB Type-C charging cable. 

• One user manual.

No e-liquid included. Pair it with a 50/50 nic salt or higher-PG freebase liquid for the best results. Replacement Loomix pods are sold separately in packs of two across four resistances.

Compatible With the Full Loomix Pod Range

The Aspire Loomix device accepts any Loomix pod. The kit ships with the 0.8ohm preinstalled, but you can swap to the 0.4ohm (21-27W) for RDTL, the 0.6ohm (16-19W) for a balanced crossover, the 1.0ohm (11-13W) for firm MTL, or the 1.2ohm (8-11W) for the tightest, coolest draw in the range.

Loomix pods are exclusive to the Loomix device. They do not fit the Gotek, Flexus, Minican, Vilter, or any other Aspire kit. And no other Aspire pods fit the Loomix. This is a dedicated platform.

About Aspire

Aspire has been manufacturing vape hardware since the earliest days of the UK vaping market. The Loomix represents Aspire's latest thinking on what a refillable pod kit should be: button-fired control, adjustable airflow, premium materials, and a pod platform with five resistance options spanning the full range from tight MTL to open RDTL. 

Where the Gotek line focused on simplicity and the Flexus range emphasised versatility through removable coils, the Loomix takes a different path. Built-in mesh coils in each pod, a zinc alloy body that feels genuinely solid, and a segment display that keeps information visible without the complexity of a full screen. It sits between the entry-level and the advanced in Aspire's lineup, which is exactly where most UK vapers end up.

Stock Up and Save

The Loomix kit comes with one pod. At daily use, a pod lasts roughly one to two weeks. Picking up a pack of replacement pods alongside the kit means you are set for the first month without reordering. 

Worth grabbing two different resistances if you are not sure whether you prefer MTL or RDTL. The 0.8ohm in the box gives you the middle ground, and adding a 1.0ohm or 0.4ohm pack lets you explore both ends. 

Every order from Pirate Vapes ships same-day before 4 pm in padded packaging. TPD-compliant stock, age-verified checkout, over 18s only. Free Pirate Post on orders over £25.

Conclusion

The Aspire Loomix is a properly built refillable pod kit with a 1,500mAh battery, 2A USB-C charging, button-fired control, adjustable side airflow, and five mesh pod resistances spanning MTL through RDTL. The zinc alloy body with leather-style back panel feels like a step up from the typical plastic pod kit, and the ECO/MAX wattage switching adds flexibility without complexity. 

Four colours, a 2ml TPD-compliant pod preinstalled, and a USB-C cable in the box. If you want a pod kit that gives you genuine control over your draw style without the fuss of a full mod setup, the Loomix delivers. Pick one up alongside spare pods and your favourite e-liquid at Pirate Vapes and check out more Vape Accessories while you are here.

FAQs

What pod comes with the Loomix kit?

The UK TPD kit includes a 0.8ohm mesh pod (2ml) preinstalled. Replacement pods are available in 0.4, 0.6, 0.8, 1.0, and 1.2ohm.

Is the Loomix draw-activated or button-fired?

Button-fired. Press and hold the fire button to vape. Five clicks to power on/off. Triple press to switch ECO/MAX mode.

What e-liquid works best?

50/50 VG/PG or higher-PG liquids. Nic salts at 10-20mg suit the 0.8, 1.0, and 1.2ohm pods. Lower-strength freebase at 3-6mg works well in the 0.4ohm pod.

How long does the battery last?

The 1,500mAh battery lasts a full day or more for most MTL vapers. USB-C charging at 2A tops it up quickly.

Can I use Gotek or Flexus pods in the Loomix?

No. The Loomix only accepts Loomix pods. No other Aspire pod series is compatible.