Aspire Gotek Pro Starter Kit

If you've been using Prefilled Pods or disposables and want to try bottled e-liquid without getting into anything complicated, the Gotek Pro is worth a look. Pirate Vapes carries it in five brushed metal finishes. It's Aspire's answer to the "I just want something that works" crowd: 1500mAh battery, refillable 2ml pod, draw-activated firing, and an airflow slider on the bottom so you can tighten or loosen the draw.

Fill it with whatever nic salt or 50/50 liquid you like. The 0.8Ω mesh coil comes already fitted in the pod, and Aspire even throws in a USB-C cable, which is more than most kit manufacturers bother with these days.

Why vapers choose this:

• Battery genuinely lasts a full day for most MTL vapers, sometimes longer

• Works with any nic salt or 50/50 e-liquid you already own

• Airflow slider on the base lets you customise draw tightness

• Every replacement pod ships with a fresh mesh coil inside

• Aluminium body that actually feels like a proper device, not a toy

Aspire Gotek Pro Starter Kit Features

All-Day 1500mAh Battery

Aspire more than doubled the battery from the Gotek X (which had 650mAh). In practice, that means most people get through a full day without reaching for the cable. Some lighter vapers stretch it to two days. The LED on the front goes from green to blue to red as charge drops, so you're not guessing.

Bottom Airflow You Can Actually Adjust

There's a small slider underneath the device. Push it one way for a tight, cigarette-like pull. Push it the other way and the draw opens up into something looser. It's a small thing, but it makes a real difference if you're picky about how a vape feels in your mouth. Most people set it once and forget about it.

Mesh Coil Pods (0.8Ω)

The coil sits inside the pod itself. You don't buy coils separately or screw anything in. When the flavour starts going downhill after a week or so, you bin the old pod and click in a new one. Mesh heating means the liquid gets vaporised more evenly across the surface, which generally translates to better taste. Aspire sells replacement pods in twin-packs, which keeps the ongoing cost low.

Side-Fill Port with a Clear Window

Refilling is straightforward. Pull the pod out, peel back the rubber stopper on the side, squeeze your liquid in. The pod has a transparent section so you can eyeball how much is left without pulling it apart. Beats running the coil dry and getting that horrible burnt hit.

Aspire's ASP Chipset

All the safety stuff runs in the background. Overcharge protection, short-circuit protection, overheat cutoff. You don't interact with any of it. The device just won't fire if something's wrong, and it stops pulling power once the battery's topped up. For a buttonless kit, that level of built-in protection matters.

Aspire Gotek Pro Starter Kit Colour and E-Liquid Pairing

No built-in flavours here. The Gotek Pro is fully refillable, so you're choosing your own e-liquid and filling the pod yourself. That's part of the appeal: you control exactly what goes in, what nicotine strength you use, and what VG/PG ratio works for you.

Five colours available at Pirate Vapes:

• Gold: Warm polished finish, stands out without being loud

• Gunmetal: Dark grey, goes with everything

• Rose Gold: Metallic pink-gold, popular with anyone who's tired of black and silver

• Stainless Steel: Clean polished silver, classic look

• Titanium: Matte silver-grey, subtle and understated

What to fill it with:

• Nic salts at 10mg or 20mg are the sweet spot for this coil. Smooth throat hit, quick absorption, and the 0.8Ω mesh handles them well

• 50/50 VG/PG Freebase at 3mg to 18mg works too, especially if you prefer a bit more throat sensation

• Bar salts are a good shout if you're coming from disposables and want to recreate those flavours

One thing to avoid: High-VG Liquids (70/30 or thicker). The 0.8Ω coil doesn't wick thick juice fast enough and you'll end up with dry hits and a pod that dies early.

How to Set Up the Aspire Gotek Pro Starter Kit

Takes about five minutes, most of which is just waiting for the coil to soak.

1. Unbox the device, the pod, and the USB-C cable. Give the battery a charge if the LED's showing red. Full charge takes about an hour.

2. Grab the pod and flip open the rubber stopper on its side. That's your fill port.

3. Fill it with your chosen e-liquid. Don't go past the max line. Close the stopper and press it flat.

4. Drop the pod into the top of the device. There's a magnet that pulls it into place. You'll feel it click.

5. Leave it sitting for up to five minutes. The mesh coil needs time to absorb liquid. Skip this step and your first few puffs will taste burnt.

6. Adjust the airflow slider on the bottom. Tight for MTL, open for a looser draw.

7. Inhale from the mouthpiece. That's it. No buttons, no menus. It fires on the draw.

When the flavour starts fading or you're getting less vapour, the pod's done. Pull it out, pop a fresh Gotek pod in, fill it up, and you're back in business.

What's in the Aspire Gotek Pro Starter Kit Box

Aspire packs in the charging cable, which is a nice change from the kits that make you source your own.

• The Gotek Pro device (1500mAh battery, aluminium body, adjustable airflow)

• One Gotek pod with 0.8Ω mesh coil already inside

• A USB-C charging cable

• User manual

You'll need to buy e-liquid separately. If you haven't picked a liquid yet, the nic salt and 50/50 ranges at Pirate Vapes are a solid starting point. Something in the 10mg or 20mg nic salt range tends to pair best with this device.

Built for the Aspire Gotek Pod Range

The Gotek Pro runs on Aspire's own Gotek pods. Good news if you already own a Gotek X: the pods are interchangeable. Your old stock works in the new device.

Fits these pods:

• Aspire Gotek 0.8Ω mesh pod (2ml refillable, sold in twin-packs)

• Aspire Gotek X pods (same shape, same coil, same connection)

Won't work with:

• Aspire Nautilus pods

• Aspire Flexus pods

• Aspire PockeX coils

• Pods from other brands

Each replacement pod has a new coil built in. Nothing extra to buy or install.

About Aspire

Aspire's been around since the early days of vaping and they've put out some of the UK's most popular hardware. The Nautilus tank was a game-changer when it launched, and the PockeX still sells well years later. More recently, Aspire hardware powers some third-party branded kits too, including the BEAR Pro MAX.

The Gotek range is their current focus for the Refillable Pod market, and the ASP chipset they use handles all the safety features without the user needing to think about it. Everything Pirate Vapes stocks from Aspire is MHRA-notified and TPD compliant.

Stock Up and Save

Gotek Pro orders from Pirate Vapes ship tracked, and everything placed before 4pm goes out that same working day. Spend over £25 and delivery's free. We only carry genuine Aspire stock through authorised UK supply chains, MHRA-notified and fully traceable.

While you're ordering, throw in a twin-pack of spare Gotek pods and a bottle or two of nic salt. Nobody wants to be stuck with a worn-out coil on a Tuesday night and nothing to replace it with.

Conclusion

The Gotek Pro is one of those devices that does one thing and does it well. Fill it, inhale, and it works. The 1500mAh battery lasts all day for most people, the airflow slider gives you enough control to get the draw right, and the pod system keeps maintenance to an absolute minimum.

It's a particularly good fit if you're stepping away from Prefilled Kits or disposables and want to start saving money by using bottled e-liquid instead. Pair it with a nic salt from Pirate Vapes, keep a couple of spare pods on hand, and your weekly vaping costs drop noticeably compared to buying prefilled pods or single-use alternatives.

FAQs

What liquid works best in this thing? 

Nic salts at 10mg or 20mg in a 50/50 VG/PG blend tend to give the best results. Freebase at 3mg to 18mg is fine too. Just stay away from anything above 60% VG. Thick juice doesn't wick well through the 0.8Ω coil and you'll get dry hits.

How long does the battery actually last? 

Depends on how much you vape, but most MTL users get through a full day without charging. Heavier vapers might need a top-up in the evening. The colour-coded LED makes it easy to check where you're at: green means you're fine, blue means halfway, red means plug it in soon.

I've got a Gotek X already. Can I use those pods? 

Yeah. Exact same pod, exact same coil, exact same magnetic fit. If you're upgrading from the X to the Pro, your leftover pods work without any changes.

How long do the pods last before I need to swap? 

Roughly a week to two weeks, depending on how often you vape and what liquid you use. Sweeter and darker e-liquids tend to gunk up coils quicker. When the flavour goes flat or the vapour thins out noticeably, it's time for a fresh one.

Can I adjust the airflow? 

Yes. Slider on the bottom. Close it down for a tight, cigarette-style draw. Open it up for something airier. Most people fiddle with it when they first get the device and then leave it wherever feels right.

Is there a fire button? 

No button at all. It's fully draw-activated. You put it to your lips, inhale, and the chipset fires within milliseconds. There are no settings, no menus, no modes to cycle through.