Aspire Odan Replacement Coils

Linen and cotton, not just cotton. That wicking blend is what sets these apart. Aspire uses an 80/20 mix of linen and organic cotton inside every Odan coil, which saturates faster and handles heat better than cotton alone.

Three mesh options: the 0.3 ohm at 35 to 45W for a cooler, more accessible DTL draw, the 0.2 ohm at 50 to 60W as the middle ground, and the 0.18 ohm at 60 to 80W for full cloud. Press-fit. Sold in packs of 3. Fits the Odan, Odan Mini and Odan EVO. Pirate Vapes ships them age-verified across the UK.

Why vapers choose this:

• Linen-and-cotton wicking saturates faster and handles heat better than cotton alone.

• Three mesh options covering 35W to 80W, from mild DTL to heavy cloud.

• One coil fits every Odan tank, including the Mini and the EVO.

• Press-fit installation, no threading, no tools.

• Three to a pack, each lasting one to two weeks at daily DTL wattage.

Aspire Odan Replacement Coils Features

Why Linen Matters

Most coils wick with organic cotton and leave it at that. Aspire went a different direction. The Odan coils pack in 80% linen fibre alongside 20% organic cotton. Linen grabs e-liquid faster. It also holds together under heat longer than cotton does on its own. Practically speaking? Fewer dry hits when you chain-vape, and a coil that keeps tasting right a few days longer than you would expect. Not a dramatic difference, but enough that you notice when you go back to a cotton-only coil.

Big Clouds at 0.18Ω

This one runs hot. 60 to 80W, wide-open airflow, thick vapour. It pairs best with a 70-30 Shortfill and a mod that has headroom to spare. Your battery will not thank you, and your juice will vanish quickly, but if you chase dense flavour above everything else, this is the coil that delivers it.

0.2Ω Sits in the Sweet Spot

Not too much, not too little. At 50 to 60W you get a warmer draw than the 0.3Ω without the juice and battery demands of the 0.18Ω. Honestly, this is the coil most daily Odan users end up on after trying all three. Works well with High-VG Juice at 60% VG and above.

Start Here With the 0.3Ω

Cooler vapour. Lighter draw. Kinder to the battery and easier on the juice bottle. At 35 to 45W the 0.3Ω does not ask much from the mod, which makes it a good first sub-ohm coil if you have been vaping MTL up to now. The mesh still pulls solid flavour at these lower wattages, and the linen wick has no trouble keeping up.

Press-Fit, Same Across the Range

The coil pushes into the Odan tank base and holds by friction. Pull to remove, push to install. The same coil fits the full-size Odan, the Odan Mini and the Odan EVO, so you never need to check which version of the tank you have. Browse our Aspire Range for the tanks and kits.

Aspire Odan Replacement Coils Resistance Options

No flavour to choose. These are empty coils, you fill the tank with your own juice. Three mesh options.

• 0.18 ohm - 60 to 80W, warmest draw, biggest cloud, for experienced DTL vapers

• 0.2 ohm - 50 to 60W, a balanced middle with good flavour and cloud

• 0.3 ohm - 35 to 45W, coolest draw, easiest on battery, the beginner-friendly pick

All three need high-VG juice, 60% VG minimum, 70/30 or higher for the 0.18Ω and 0.2Ω. Freebase at 3 to 6mg. Avoid nic salts at these wattages. Browse our e-liquid range for the right bottle.

How to Set Up the Aspire Odan Replacement Coils

1. Unscrew the Odan tank base and pull the old coil straight out.

2. Push the new coil firmly into the base until it stops.

3. Trickle a little juice into the mesh through the visible cotton on the outside to get the wick going.

4. Reassemble the tank, fill with high-VG e-liquid, and leave it for five minutes so the linen-cotton wick fully saturates.

5. Start at the low end of the coil's wattage range and step up over the first few draws.

What's in the Aspire Odan Replacement Coils Box

Three mesh coils in the resistance you choose. No tank, no device, no e-liquid. You will need a thick juice to fill the tank, a Shortfill is the natural choice at these wattages.

Built for the Aspire Odan, Odan Mini and Odan EVO

One coil fits the entire Odan family. The full-size Odan, the Odan Mini and the Odan EVO all take the same press-fit coil in the same resistances. They are not compatible with any other Aspire tank, not the Nautilus, not the Cleito, not the PockeX, not the BP platform. The Odan coils are their own family. You will find them alongside the tanks in our coils collection.

About Aspire

Aspire was making sub-ohm tanks when half of today's vape brands did not exist yet. The Odan line is not their flashiest range, but it might be their most practical. That linen-cotton wick is genuinely uncommon, it works, and the fact that one coil fits every Odan tank ever made keeps the restocking side dead simple.

The tank draws smoothly, the coils last well for the wattage they run at, and there is very little drama involved. Sometimes boring reliability is exactly what a daily sub-ohm setup needs.

Stock Up and Save

Three coils per pack. At DTL wattages, budget for one coil per week on heavy use, maybe longer on the 0.3Ω. If you pair a couple of packs with a few bottles from our multi-buy page, the per-week cost is genuinely modest for a sub-ohm setup. Genuine Aspire, dispatched tracked, age-verified checkout. Over 18s only.

Conclusion

Three mesh coils. One unusual wick. A press-fit that works across every Odan tank Aspire has made. The 0.3Ω is where most people start. The 0.2Ω is where most people stay. The 0.18Ω is for the days when you want the room to fill up. Match the juice, pick the wattage, and the linen does the rest. Grab a 3-pack from Pirate Vapes with fast, age-verified UK delivery.

FAQs

Will these fit my Odan Mini?

Yes. Same coil across the Odan, the Mini and the EVO. No need to check which tank version you have.

Which resistance for a first-time sub-ohm vaper?

Go with the 0.3Ω. Runs at 35 to 45W, which most mods handle easily. Cooler vapour, lighter battery drain, and you still get the mesh flavour benefit. Work your way up to the 0.2Ω once you are comfortable, if you want more warmth.

What is the linen-cotton wick about?

Aspire blends 80% linen with 20% organic cotton. Linen soaks up juice faster and survives heat better. End result is fewer dry hits and a coil that keeps tasting clean a bit longer than pure cotton manages.

Can I use nic salts in these coils?

Bad idea. At 35W and above the vapour output is far too heavy for nic salt strengths. Stick to freebase at 3 to 6mg.

How long does a coil last?

Depends. The 0.3Ω running lighter juice at 35W? Could push two weeks. The 0.18Ω on a sweet dessert juice at 75W? Maybe five days. Most people land somewhere around a week to ten days.

Are these the same as BP or AF coils?

No. Completely separate coil families. Odan coils fit Odan tanks only. BP coils go in the Veynom and BP Stik. AF coils go in the Flexus range. None of them interchange.