Crystal Pro CP 10K Prefilled Pod Kit

Ten thousand puffs from a single pod-and-container setup, no coil changes, no refilling. The Crystal Pro CP 10K carries 12ml of e-liquid in total: a 2ml pod clicks onto a 10ml container, and the container feeds the pod automatically as you vape. Nicotine strength sits at 20mg across every flavour.

A 0.8ohm mesh coil inside the pod produces a tight MTL draw with consistent vapour across the full run. The 1000mAh battery lasts a full day on moderate use, and USB-C charging brings it back in around 45 minutes. Draw-activated, transparent crystal-style body. Over 18s only.

Why Vapers Choose the Crystal Pro CP 10K Prefilled Pod Kit:

• 10,000 puffs with zero maintenance. One pod, one container, one device. No coil swaps, no manual filling, no settings. 
• 12ml of total capacity at 20mg strength. The 10ml container feeds the 2ml pod automatically, so the coil stays saturated right through to the end. 
• 0.8ohm mesh coil for reliable MTL flavour. Mesh heats the e-liquid more evenly than wire coils, which means sharper flavour detail and steadier vapour from the first draw to the last.
• 1000mAh battery that handles a full day. Moderate vapers will comfortably get through an entire day without charging.
• 20 flavours across fruit, ice, candy, and soda profiles. One of the widest pod ranges in the 10K prefilled market. Switch flavours between pod packs without buying a new device.

Crystal Pro CP 10K Prefilled Pod Kit Features

Below are the key features of the Crystal Pro CP 10K Prefilled Pod Kit.

Up to 10,000 Puffs Per Kit

The 2ml pod and 10ml auto-refill container combine for 12ml of nic salt and approximately 10,000 puffs per setup. That puts one kit on par with roughly 17 standard 600-puff disposables. Actual count depends on draw length and frequency, but on moderate daily use, a single pod-and-container set lasts most vapers between one and two weeks before needing a replacement.

0.8ohm Mesh Coil

The mesh heating element covers a wider surface area than standard round-wire coils, distributing heat more evenly across the wick. This translates to sharper flavour definition and a more stable vapour density on every draw. At 0.8 ohms, the coil is tuned for MTL vaping: a tight, restricted airflow that sits close to the feel of a traditional cigarette. 

1000mAh Rechargeable Battery with USB-C

The battery handles a full day of MTL use for most vapers. Heavier users may need a top-up by the evening, but the USB-C charging port gets you back to full in around 45 minutes, so downtime is minimal. An LED indicator on the device tracks battery status, giving you a clear read on when to plug in rather than guessing from vapour output.

Draw-Activated Simplicity

No buttons, no menus, no power settings. The Crystal Pro CP 10K fires the moment you inhale and stops when you stop drawing. This is the same pick-up-and-go activation that made disposables popular, carried over into a rechargeable format.

Transparent Crystal-Style Body

The CP 10K's body uses a translucent shell that shows the internal assembly and gives the device a distinctive look compared to the matte plastic housings on most competing kits. Beyond aesthetics, the transparent design lets you visually confirm the pod is properly seated. The ergonomic shape fits comfortably in the hand and pockets flat without bulk.

Crystal Pro CP 10K Prefilled Pod Kit Flavours List

The CP 10K range covers 35 flavours at 20mg and 15 flavours at 0mg, spanning fruit, ice, candy, soda, and menthol profiles. The 0mg options suit vapers stepping down from nicotine or those who want the flavour and ritual without it.

20mg Options

0mg Options

How to Set Up the Crystal Pro CP 10K Prefilled Pod Kit

1. Remove the device, pod, and refill container from the packaging. Peel off any stickers or protective wrapping.
2. Remove the silicone bung from the base of the pod unit.
3. Unscrew the protective cap from the top of the container.
4. Push the pod firmly into the container.
5. Drop the assembled pod-and-container unit into the device until it seats firmly.
6. Wait 2 to 3 minutes for the mesh coil to fully saturate before first use.
7. Connect a USB-C cable (not included) and charge fully. The LED indicator confirms battery level.
8. Draw to vape. Inhale through the mouthpiece. The device fires automatically on draw.

What's in the Crystal Pro CP 10K Prefilled Pod Kit Box

The kit arrives as a three-piece package. You get the: 

• Crystal Pro CP 10K device (1000mAh battery, transparent body)
• One prefilled pod (2ml, 0.8ohm mesh coil fitted)
• One refill container (10ml). 
• A user manual is included.

A USB-C charging cable is not included, so you will need to supply your own.

Designed Exclusively for Crystal Pro CP 10K Refill Pods

The CP 10K works exclusively with Crystal Pro CP 10K Refill Pods. Browse Crystal Pro CP 10K replacement pods at Pirate Vapes. The device charges via any standard USB-C cable.

About Crystal Pro

Crystal Pro made its name with the Crystal Pro Max 10000, a transparent-bodied disposable that became one of the most recognisable high-puff devices in UK vape shops. When the single-use ban came into force in June 2025, the original Max 10000 was pulled from sale because its 18ml e-liquid volume exceeded TPD limits.

Crystal Pro responded with the CP 10K: a rechargeable Prefilled Pod Kit that reaches the same 10,000-puff lifespan through a TPD-compliant pod-and-container setup. The CP 10K keeps the brand's signature transparent body and mesh coil technology while moving to a format where only the pod swaps out, not the entire device. All Crystal Pro CP 10K products are TPD-compliant and MHRA-registered for UK sale.

Stock Up and Save

The CP 10K runs on replacement pods, and daily vapers will typically go through one every one to two weeks. Keeping a spare on hand means no gaps between flavours. Orders over £25 qualify for Free Delivery at Pirate Vapes, and anything placed before 4 pm ships the same day.

Picking up multiple pod packs through our Value Bundles drops the per-pack cost. If you would rather automate the whole process, Auto Refill ships your chosen flavour on a schedule you set, with savings on every delivery. Pirate Vapes dispatches within 24 hours of every order. We stock the full range of Crystal Pro CP 10K replacement pods across all flavour options.

Conclusion

The Crystal Pro CP 10K does one thing cleanly: it delivers 10,000 puffs from a rechargeable device with no buttons, no settings, and no coil changes. The 0.8ohm mesh coil keeps flavour consistent right through the 12ml e-liquid capacity, and the 1000mAh battery handles a full day without asking for a charge until evening. 35 flavours give you enough variety to rotate through the range between pod swaps.

For vapers who left disposables behind and want the same simplicity in a rechargeable format, the CP 10K is about as close as it gets. Browse the full Crystal Pro CP 10K replacement pod range to find your next flavour, or explore our wider Big Puff Pod Kits collection to compare across brands.

FAQs

What nicotine strength does the Crystal Pro CP 10K use? 

Every pod carries 20mg (2%) nic salt. No lower-strength options have been confirmed for this range at the time of writing.

What pods work with the Crystal Pro CP 10K? 

Only Crystal Pro CP 10K replacement pods. The pod shape and connection are specific to this device and will not fit other Crystal Pro models or third-party kits.

How long does the battery last? 

A full day of moderate use. Heavier vapers may need to top up by the evening.

How do I know when the pod needs replacing? 

Flavour will thin out, and vapour production will drop noticeably. Some vapers also notice a slightly muted or papery taste, which signals the coil and liquid are done.

Is the Crystal Pro CP 10K TPD compliant?

The pod sits at 2ml (within the TPD ceiling), and nicotine strength is 20mg (the legal maximum). MHRA registration references have been published.