Eleaf iStick Power 2 Vape Kit

Eleaf iStick Power 2 Vape Kit

A proper box mod with a battery that goes the distance. The Eleaf iStick Power 2 pairs a large 5000mAh built-in battery with the GTL pod tank and up to 80W of output, run through a 0.96-inch colour screen and Eleaf's Avatar smart chip.

Two coils come in the box: a 0.8ohm for a warmer restricted DTL draw and a 1.2ohm for a tighter MTL pull, so it covers both styles from one kit. Power, Voltage and Smart modes let you set it as loosely or as carefully as you like. Browse more Vape Mods for other options.

Why vapers choose this:

• All-day battery. The 5000mAh cell is one of the largest in a mod this size, so heavy users get through a full day and often more between charges.

• Two draws in one kit. The 0.8ohm and 1.2ohm coils cover restricted DTL and MTL.

• Smart mode reads your coil and suggests a sensible wattage, so there is nothing to work out.

• A real screen. Battery, wattage and resistance, all visible at a glance.

• Leather-wrapped grip that feels solid and warm in the hand rather than like cheap plastic.

Eleaf iStick Power 2 Features

A Battery That Lasts

The headline is the 5000mAh built-in battery. That is a lot of capacity for a mod you can still hold comfortably, and it is the trait the original iStick Power was known for. Charge it over USB-C, and it tops up quickly. For most vapers this is a one-charge-a-day device, sometimes less, which is why it sits among the bigger Box Mods worth carrying.

Three Modes, One Simple Menu

The Avatar chip gives you three ways to run it. Power mode is straight variable wattage. Voltage mode sets a voltage instead. Smart mode reads the fitted coil and recommends a wattage for you, which is the easiest place to start. Two buttons and the 0.96-inch screen handle all of it. No deep menus to get lost in.

Two Coils, Two Styles of Vape

The kit includes two GTL coils. The 0.8ohm runs warmer for a restricted direct-to-lung draw with more vapour. The 1.2ohm tightens things up for a mouth-to-lung pull, which pairs well with a stronger Nic Salts Juice. Swap between them depending on the day. One kit, two quite different vapes, no extra hardware needed.

Read the Screen, Skip the Guesswork

The 0.96-inch TFT colour display keeps the important numbers in front of you: battery level, wattage, and the resistance of the coil you have fitted. Because the chip recognises the coil, you are not guessing at safe power. For anyone stepping up from a pod with no screen, that feedback makes a box mod far less intimidating.

Leather Grip, Proper Weight

Eleaf wrapped the zinc-alloy body in a colour-block synthetic leather panel, a signature of the iStick line. It gives the mod grip and a bit of heft without being heavy. Small thing, but it is the part you hold all day, and it feels the part.

Eleaf iStick Power 2 Colours

Five finishes are stocked, each with the leather-panel design on the same body. The hardware is identical, so pick on looks.

#buttons

• Black
• Blue
• Dark Brown
• Light Brown
• Red

How to Set Up the Eleaf iStick Power 2

First fill or a coil change, the steps are the same. A few minutes.

1. Pull the GTL tank off the magnetic base and press out the old coil if you are replacing one.

2. Drip e-liquid into the wicking holes on the side of the new GTL coil, saturating them until you can see the cotton darken through the ports.

3. Push the primed coil firmly into the tank until it seats, then click the tank back onto the mod.

4. Open the top cap and fill the 2ml tank, then close it.

5. Stand the kit upright and leave it a full ten minutes so the coil wicks all the way through before you fire it.

6. Press the fire button five times to switch on, choose Smart mode to start, and vape, nudging the power up if you want more.

What's in the Eleaf iStick Power 2 Box

The kit comes with:

• the iStick Power 2 mod,

• the GTL pod tank at 2ml,

• a 0.8ohm GTL coil,

• a 1.2ohm GTL coil,

• a USB-C charging cable,

• a manual

• and a warranty card.

There is no e-liquid included, so add a bottle to match your coil, and a spare coil pack is worth grabbing at the same time.

Takes the Full Eleaf GTL Coil Range

The tank runs Eleaf's GTL coil platform, so beyond the two heads in the box you can drop in other GTL resistances to fine-tune the draw. Coils are push-to-fit with no threading, and the tank clicks onto the mod magnetically. Pirate Vapes keeps GTL coils in stock, and if you settle on a resistance you like, it is worth putting it on The Crow's Nest auto refill so you never run out. Browse the Vape Coils range for spares.

The mod uses a standard 510 thread, so it will take other 510 tanks too if you want to run something sub-ohm later. For the 0.8ohm coil, a thicker High VG E-Liquid at a lower nicotine level gives the best clouds and flavour.

About Eleaf

Eleaf built its name on the original iStick range, and the iStick Power was the one people bought for its enormous battery life. The iStick Power 2 carries that forward: the same big-battery idea, now with the Avatar smart chip, a colour screen, and the GTL coil system for flexible MTL and DL vaping.

Eleaf is one of the long-standing names in vape hardware, and the iStick Power 2 is a good example of the brand doing a simple thing: all-day power in a comfortable mod, well.

Stock Up and Save

A mod is only as good as its coils, so grab a spare GTL coil pack and a bottle of your usual liquid with the kit. Pirate Vapes dispatches every order the same day when it is placed before 4 pm, boxed to arrive safely.

All stock is TPD compliant, sold through an age-verified checkout to over-18s only, with Free Pirate Post on orders over £40.

Conclusion

The iStick Power 2 is a big-battery 80W box mod that does not overcomplicate things: a 5000mAh cell, a clear screen, three modes, and two GTL coils that cover both MTL and restricted DTL.

It suits anyone who wants a proper mod with all-day power and a bit of style. Fill it, pick a mode, and vape. Grab the kit, spare coils, and any Vape Accessories you need from Pirate Vapes.

FAQs

How long does the iStick Power 2 battery last?

The 5000mAh battery gets most vapers through a full day, often more. Higher wattage on the 0.8ohm coil drains it faster than the 1.2ohm at low power.

Is iStick Power 2 MTL or DTL?

Both, depending on the coil. The 1.2ohm gives a tight MTL draw. The 0.8ohm opens up for a restricted DTL vape with more vapour.

What coils does iStick Power 2 use?

Eleaf GTL coils. It ships with a 0.8ohm and a 1.2ohm, and the wider GTL range fits too.

What e-liquid should I use in iStick Power 2?

For the 1.2ohm MTL coil, a 50/50 or nic salt. For the 0.8ohm coil, a higher-VG shortfill. Match the thicker juice to the lower resistance.

How do I charge iStick Power 2?

Over USB-C with the included cable. Fast charging fills the big battery quicker than you might expect.

Can I use my own tank on iStick Power 2?

Yes. The mod has a 510 thread, so any standard 510 tank will fit if you want to run something different later.