Eleaf iVeni Vape Pod Kit

Eleaf iVeni Vape Pod Kit

A pod kit with a proper colour screen and wattage you actually set. The Eleaf iVeni runs a 1100mAh battery with 6W to 40W adjustable output, and it ships with two mesh pods: a 0.4ohm for a looser RDL draw and a 0.8ohm for a tighter MTL one. Both are 2ml refillable pods you fill from the side.

An HD colour display, adjustable airflow and 2A Type-C fast charging make it more of a device than most at this size. It sits among our Refillable Pod Kits and stands out in the wider Vape Kits range for anyone who wants a bit more control.

Why vapers choose this:

• Real wattage control. Set the power from 6W to 40W to suit the pod and the flavour, rather than being stuck on one output.

• Two draw styles included. The 0.4ohm covers RDL, the 0.8ohm covers MTL, so both habits are sorted from the box.

• A colour screen that actually tells you what is going on, which is rare on a pod this size.

• 2A fast charging over Type-C fills the 1100mAh cell quickly.

• Fire how you like. Press the button or just inhale.

Eleaf iVeni Features

HD Colour Screen and 6W–40W Power

This is what lifts the iVeni above a basic pod. The colour display shows wattage, coil resistance and battery at a glance, and three clicks of the button let you change the power anywhere from 6W to 40W. Dial it up for the 0.4ohm pod, down for the 0.8ohm, and fine-tune from there. It pairs well with your choice of Nic Salt E-Liquids on the MTL pod.

0.4Ω and 0.8Ω Pod Options

The 0.4ohm pod is the RDL one, made for a warm, airy draw and a thicker high-VG e-liquid. The 0.8ohm is the tight MTL pod for a 20mg nic salt or 50/50 blend. Between them you can run the iVeni like a cloud kit one day and a discreet MTL pen the next, which puts it among the more flexible MTL vape kits this size.

Button and Auto-Draw Activation

The iVeni has a dual activation mode. Use the single control button if you like a deliberate press, or leave it to auto-draw and just inhale like a disposable. Five clicks turn it on or off, and four clicks lock the button for your pocket or bag.

Side-Fill Pod and Adjustable Airflow

Filling is quick and mess-free. Pop the silicone plug on the side, add your e-liquid to the 2ml line, push it back in. The airflow valve is on the side too, sliding from a tight MTL setting to a wide-open RDL one so you can set the draw exactly how you like it.

1100mAh Battery With 2A USB-C

The 1100mAh cell gets most people through a day, and when it does run down, the 2A Type-C charging tops it back up quickly rather than leaving you waiting. The four-bar battery readout on the screen tells you exactly where you stand.

Eleaf iVeni Colours

Five finishes are stocked here, plus a pick-for-me option if you are not fussed. Each has the same colour screen and side controls.

#buttons

• Black
• Cyan
• Green Blue Gradient
• Gunmetal
• Purple Gradient

How to Set Up the Eleaf iVeni

Quick to get running from cold.

1. Charge it first over USB Type-C until the screen shows a full battery.

2. Pick your pod. The 0.4ohm for RDL or the 0.8ohm for MTL, and open the silicone side plug.

3. Fill to the 2ml line with your e-liquid, then press the plug firmly back in.

4. Click the pod onto the magnetic base and let the screen read the resistance.

5. Stand the device upright for five to ten minutes so the thick cotton completely saturates. Firing a dry coil will instantly ruin it.

6. Click the button 3 times to adjust your wattage to suit the pod, set your airflow, then start low and build up to taste.

What's in the Eleaf iVeni Box

Each kit includes:

• The iVeni battery,

• One 0.4ohm pod and one 0.8ohm pod, both 2ml,

• A USB Type-C cable,

• The user manual

• And a warranty card.

There is no e-liquid included, so add a nic salt or high-VG bottle to fill your pods.

Made for the iVeni Pod Range

The iVeni takes the full range of Eleaf iVeni pods, so you are not limited to the two it ships with. Want a middle-ground draw? Fit a 0.6ohm. Want the tightest MTL pull? Drop in a 1.2ohm.

Each pod is a magnetic click-in with its coil built in, and the screen reads the resistance automatically. Keep spares on hand from our Replacement Pods collection so you are never caught without a working pod. Every iVeni kit sold through Pirate Vapes is genuine Eleaf stock.

About Eleaf

Eleaf is one of the longer-standing names in vaping, known for approachable, reliable kits going back to the iStick and iCare days. The iVeni carries that reputation into a modern pod system: an easy device for newer vapers, but with a colour screen and real wattage control that give more experienced users something to work with.

It is the kind of dependable, no-drama kit Eleaf built its name on, brought up to date with fast charging and a screen you will actually use.

Stock Up and Save

If you have outgrown a basic one-setting pod and want a little more say over your vape, this is a sensible step up. The screen and adjustable power let you tune each pod properly, and the two coils mean you can experiment with both draw styles before committing.

Add a bottle of 50/50 E-Liquid for the MTL pod, and you are set. Every order from Pirate Vapes is TPD compliant, sold to over-18s only through age-verified checkout, with Free Pirate Post over £40 and same-day dispatch before 4 pm.

Conclusion

The iVeni is an easy recommendation for anyone who wants a compact pod kit that does more than the basics, with a colour screen, adjustable wattage and two pods covering both MTL and RDL.

Fast charging and side filling keep it practical day to day. Grab some e-liquid to match your pod and pick up anything else from our Vape Accessories range, or head back to Pirate Vapes to keep browsing.

FAQs

Is the iVeni refillable?

Yes. You fill the 2ml iVeni pods yourself from the side plug, so you choose the flavour and strength.

What is the difference between the iVeni’s two pods?

The 0.4ohm is an RDL pod for warm clouds and high-VG juice. The 0.8ohm is a tighter MTL pod best with nic salts.

Can I adjust the iVeni’s wattage?

Yes. Three clicks of the button change the power anywhere from 6W to 40W, shown on the colour screen.

Does the iVeni have a fire button or auto-draw?

Both. You can press the button to fire or simply inhale, whichever you prefer.

What nicotine should I use in the iVeni?

A 20mg nic salt or 50/50 liquid suits the 0.8ohm MTL pod. For the 0.4ohm RDL pod, a lower-strength, thicker high-VG juice works best to prevent leaking.

How big are the iVeni pods?

The UK fill is 2ml. iVeni pods hold up to 3ml on international versions, but you fill to the 2ml line here.