Freemax Evox Replacement Pods

Freemax Evox Replacement Pods

When the flavour on your EVOX starts to fade, this is the fix. The Freemax Evox Replacement Pods are refillable 2ml side-fill cartridges with the coil built in, so there is nothing to screw together: you fill, click the pod on, and vape.

Sold in a pack of three and stocked in 0.6ohm and 0.8ohm, they cover a warmer restricted DTL draw and a tighter MTL one. FM Leak-Resistant Technology keeps liquid where it belongs. If you run a Freemax EVOX, these are the Replacement Pods it was built for. Over 18s only.

Why vapers choose this:

• Integrated coil means zero coil-fiddling. There is no threading, no priming a bare coil, no aligning anything. When the pod is done, you pull it off the magnets and press the next one on. For anyone who found coil swaps a hassle, this is the appeal of the whole EVOX system.

• Two resistances from one pack range, so you can run MTL or restricted DTL without buying a different device.

• Side-fill with a silicone stopper keeps refills clean and quick.

• FM Leak-Resistant maze design holds liquid steady in a bag or pocket.

• Three pods per pack give you weeks of cover before the next reorder.

Freemax Evox Replacement Pods Features

Built-In Mesh Coil Design

There is no coil to install here. Each pod arrives with its mesh coil already sealed in, tuned to the resistance on the label. That keeps things genuinely low-maintenance: you are not priming a bare coil or worrying about seating it right. When performance dips, the pod is the part you replace, and you are back to fresh flavour in seconds.

Easy Side-Fill System

A small silicone plug sits on the side of the pod. Lift it, tip your e-liquid in through the port, and press it back down. No spills down the mouthpiece, no guessing where the liquid goes. It pairs well with a bottle of Nic Salts for the 0.8ohm, or a thinner blend for the 0.6ohm.

FM Leak-Resistant Technology

Freemax builds these with FM Leak-Resistant Technology and an internal maze structure. The idea is simple: hold the e-liquid firmly against the coil and stop it wandering toward the airflow. It is the kind of detail you only notice when a pod does not leak in your pocket on a warm day.

Durable BPA-Free PCTG Build

The pod body is BPA-free PCTG, the same tough, clear material used across better refillable pods. It resists cracking and cloudy discolouration from sweeter or citrus-heavy liquids better than standard plastic, so a pod that is still wicking well keeps looking the part too.

Lightweight And Easy To Swap

At 56.6 x 24 x 13.9mm and just 13g, the pod barely registers. It is a consumable, plain and simple, designed to be swapped rather than babied. Keep a spare in a bag, and you are never caught out mid-session. Browse the wider Refillable Pod Kits if you are still choosing a device.

Freemax Evox Replacement Pods Resistance Options

Two resistances in the picker, and the choice comes down to the draw you want. Both use the same integrated mesh.

The 0.8ohm is the everyday MTL option. It gives a tighter, cigarette-style pull and pairs best with 50/50 nic salts at 10mg or 20mg. If you are stepping across from disposables or a pod bar, start here.

The 0.6ohm opens things up. Warmer, airier, and with more vapour, it leans toward a restricted DTL draw and suits lower-strength liquids or a slightly higher-VG blend from the High VG E-Liquid range.

#buttons

• 0.6 Ohm
• 0.8 Ohm

How to Set Up the Freemax Evox Replacement Pods

Quick swap, under two minutes.

1. Pull the old pod off the magnetic connection and set it aside.

2. Lift the silicone side plug on the fresh pod to expose the fill port.

3. Fill through the side port with your e-liquid, easing off before it reaches the very top.

4. Press the plug firmly back in until it sits flush and sealed.

5. Stand the pod upright for seven to eight minutes so the built-in coil soaks right through. Skipping this is the surest way to catch a dry, burnt first hit.

6. Click it onto the device and take a couple of gentle draws to finish wetting the coil before you settle in.

What's in the Freemax Evox Replacement Pods Box

Three Freemax EVOX refillable pods in your chosen resistance, each with its coil built in. No device, no e-liquid, and no separate coils, since the coil is part of the pod.

Pair them with a 50/50 E-Liquid or nic salt to get going.

Made Only for the Freemax EVOX Pod Kit

These pods are cut specifically for the Freemax EVOX Pod Kit and nothing else. The magnetic connection and shape are matched to that device, so an EVOX pod drops straight in with no adaptor or fuss. If your kit is an EVOX, you are in the right place.

What they do not fit is the rest of the Freemax pod family. Galex pods will not seat here. Neither will Rexa or Onnix pods. Each of those runs its own pod platform, so check the label on your current pod if you are unsure, and browse Freemax Coils for other Freemax fitments.

About Freemax

Freemax made its name on mesh. The brand's whole pitch, right down to the "Free Max. Flavour Max." line, is flavour-first coil engineering, and the EVOX pod carries that through with an integrated mesh coil built for depth and consistency rather than raw cloud.

Where the EVOX system differs from a lot of pod kits is the leak-resistant maze design inside each cartridge, a small piece of engineering aimed squarely at the thing vapers complain about most. It is a straightforward, dependable pod platform from a brand that has spent years refining how mesh coils taste, and one Pirate Vapes is glad to stock.

Stock Up and Save

Refill pods are the one part of a pod kit you will always be buying, so it makes sense to keep a couple of packs ahead. A pack of three covers most vapers for a few weeks, and setting them up on The Crow's Nest subscription means they arrive before you run dry, at a saving.

Every order from Pirate Vapes ships same day before 4 pm, age-verified, with TPD-compliant stock throughout. Over 18s only. Spend over £40 and delivery is free with Free Pirate Post.

Conclusion

The Freemax Evox Replacement Pods do exactly what a good refill pod should: keep your EVOX tasting fresh with the least possible effort. Built-in mesh coils, clean side-filling, and solid leak protection across two resistances make them an easy reorder, whether you vape MTL on the 0.8ohm or lean into a warmer draw on the 0.6ohm.

Grab a pack, keep a spare, and you are sorted. Browse more Vape Accessories to go with your kit, or head back to Pirate Vapes for the full range.

FAQs

Do Evox Replacement Pods need a separate coil?

No. The mesh coil is built into each pod. When flavour fades, you replace the whole pod rather than fitting a new coil.

Which Evox Replacement Pod resistances are available?

Two: 0.6ohm for a warmer restricted DTL draw and 0.8ohm for a tighter MTL one. Both come three to a pack.

How much e-liquid do Evox Replacement Pods hold?

2ml in the UK, in line with TPD rules. Fill through the side port and stop just before the top.

What e-liquid should I use with Evox Replacement Pods?

For the 0.8ohm, a 50/50 nic salt at 10mg or 20mg works best. The 0.6ohm suits lower strengths or a slightly higher-VG blend.

Will Evox Replacement Pods fit other Freemax devices?

No. They are made for the EVOX Pod Kit only. Galex, Rexa, and Onnix all use different pods.

How long does each Evox Replacement Pod last?

Most vapers get several days to a week per pod, depending on liquid and how hard you vape. Darker and sweeter liquids shorten coil life.