Freemax Marvos X 100W Pod Kit 

The Freemax Marvos X 100W Pod Mod Kit is built for vapers who want sub-ohm clouds without fiddling with rebuildables. Running on a single 18650 battery (sold separately), it pushes out 5 to 100W and pairs with the 2ml Marvos CRC pod.

Two Double-D mesh coils come pre-fitted, a 0.15Ω and a 0.25Ω, so you can switch between them depending on how much vapour and flavour you're chasing. Top-fill, adjustable airflow, and a small OLED screen round out a kit that's genuinely easy to live with day to day.

Why vapers choose this:

• Two coils in the box, so you can compare a tighter 0.25Ω draw against a looser 0.15Ω one without buying anything extra

• Four output modes that hand you as much or as little control as you want

• Top-fill CRC pod that doesn't need removing from the device to refill

• ISO 8317 child-resistant tank, which matters if there are kids in the house

• A 0.96-inch OLED screen that actually tells you something useful at a glance

Freemax Marvos X 100W Pod Mod Kit Features

Four Output Modes, One Adaptable Device

Power mode lets you dial in your own wattage anywhere from 5 to 100W. Smart mode reads the coil and sets the output automatically, handy if you'd rather not think about ohms. VPC mode ramps the power up in stages through the draw. Bypass mode skips all the calculation and just fires at maximum. Four ways to vape from one device.

FM COILTECH 5.0 Double-D Mesh Coils

Both included coils use Freemax's Double-D mesh design, built to heat e-liquid faster and more evenly than a round coil. The 0.15Ω is the higher-output option for bigger clouds, while the 0.25Ω sits lower and gives a slightly warmer, more flavour-forward hit. Freemax rates the coiltech as up to 50% faster heating than earlier generations, so the flavour hits sooner.

Top-Fill, Child-Resistant CRC Pod

Lift the top cap, slide it, pour. You never have to pull the pod off the device just to top it up, and the tank meets ISO 8317 child-resistant certification, which is a genuine safety plus if you've got young kids around the house. Simple in daily use, properly locked down when it needs to be.

Adjustable Airflow For A Custom Draw

A rotating airflow ring on the pod lets you loosen or tighten the inhale to suit your style. Want it closer to a mouth-to-lung pull? Close it down. After a fuller, looser direct-to-lung hit with thicker clouds? Open it up. One pod, two very different vaping styles depending on where you set it.

0.96-Inch OLED Screen And Single 18650 Battery

The display shows wattage, voltage, resistance, and battery life clearly, cycling through a handful of colour themes if you fancy something more than plain white text. Power comes from a single external 18650 battery (not included), charged through USB-C at up to 2A. Fast enough to top up between sessions without leaving it plugged in for hours.

Freemax Marvos X 100W Pod Mod Kit Colours List

#buttons

• Black
• Grey
• Navy Blue
• Light Blue
• Brown
• Green

How to Set Up the Freemax Marvos X 100W Pod Mod Kit

1. Insert a charged 18650 battery into the base, matching the polarity markings inside.

2. Fit either the 0.15Ω or 0.25Ω Marvos MS coil into the CRC pod.

3. Lift the top cap, fill with up to 2ml of e-liquid, and let it soak for five minutes.

4. Click the pod onto the device, choose your output mode, and set your wattage.

5. Adjust the airflow ring to taste, then vape.

What's in the Freemax Marvos X 100W Pod Mod Kit Box

• 1 x Freemax Marvos X 100W Device

• 1 x Freemax Marvos CRC Pod

• 1 x 0.15Ω Freemax Marvos MS Coil

• 1 x 0.25Ω Freemax Marvos MS Coil

• 1 x USB-C Charging Cable

• 1 x User Manual

No battery is included, so pick up an 18650 Battery if you don't already have one at home.

Built for Sub Ohm Vapers Who Want Options

The Marvos X is designed around its own CRC pod system, so compatibility is straightforward: this device only runs the Freemax Marvos CRC pod and the Marvos MS coil range, both included in the box.

Replacement 0.15Ω and 0.25Ω coils are available separately when the stock pair start tasting flat, and the pod itself can be swapped out if it ever cracks or leaks. Everything you need to keep this kit running long-term sits within the Marvos range, no cross-brand hunting required.

About Freemax

Freemax has built a reputation among sub ohm vapers for mesh coil technology that actually performs, and the Marvos line is where a lot of that engineering gets tested. The brand focuses on getting more flavour and vapour out of standard coil builds through its Double-D and Fireluke mesh designs, rather than chasing gimmicks.

Kits like the Marvos X aim to keep things simple for the vaper: fit a coil, fill a pod, adjust the settings, and go. It's a straightforward approach that's earned Freemax a loyal following among direct-to-lung users.

Stock Up and Save

Pick up a spare set of 0.15Ω and 0.25Ω coils alongside your kit so you're never caught out mid-week with a flat-tasting hit. Pirate Vapes packs every order carefully and dispatches it tracked, so your device arrives in one piece and on time.

This kit is sold with full MHRA notification and TPD-compliant 2ml capacity, and every order goes through age-verified checkout, 18+ only. Buying the coils together with the device now saves you a second delivery down the line, and means you're set up for weeks rather than days.

Conclusion

The Freemax Marvos X 100W kit suits anyone who wants a proper sub-ohm vape without the complexity of a full mod and tank setup. Two coils in the box, top-fill refills, adjustable airflow, and four output modes cover most of what a DTL Vaper is likely to want. 

It won't suit MTL vapers looking for a tight, cigarette-style draw, but for direct-to-lung fans chasing flavour and cloud from a compact pod device, it's a solid pick. Grab yours from Pirate Vapes with fast, age-verified UK delivery.

FAQs

Does this kit come with a battery?

No. You'll need to buy an 18650 battery separately; it isn't included in the box.

What's the difference between the two included coils?

The 0.15Ω gives higher output and bigger clouds, while the 0.25Ω runs cooler with a slightly warmer, more flavour-focused hit.

What VG e-liquid should I use?

Freemax recommends 70% VG or higher for both coils. Lower VG liquids can leave the mesh underperforming.

Can I refill without taking the pod off the device?

Yes. The top-fill cap lifts and slides open, so you can top up without removing the pod from the kit.

Is the tank child-resistant?

Yes, the CRC pod is ISO 8317 child-resistant certified, with a locking top-fill mechanism.

How long does each coil last?

Typically five to ten days depending on wattage and how sweet your e-liquid is. A metallic or burnt taste means it's time to swap.