Freemax Twister Coils 

Ten coil options from one product listing. The Freemax TX and X Series coils run a patented wicking blend of 90% tea fibre and 10% organic cotton that holds liquid differently from standard cotton. More absorbent, slower to burn, noticeably longer coil life.

Available in single, dual, triple, and quad mesh builds across Kanthal and SS316L, with resistances from 0.12 to 0.5 ohm covering everything from 20W MTL-adjacent vaping right up to 90W cloud production. Five coils per pack. Fits the Freemax Fireluke 2, Fireluke 3, Twister Kit, and Maxus 100W. Over 18s only.

Why vapers choose this:

• Tea fibre + cotton wicking that outlasts standard cotton coils and delivers cleaner flavour over a longer lifespan

• Ten resistance options from a single listing. Single mesh to quad mesh, 0.12 to 0.5 ohm.

• Fits four Freemax devices: Fireluke 2, Fireluke 3, Twister Kit, and Maxus 100W

• Five coils per pack at a competitive price point. Stock up and forget about coils for weeks.

• SS316L option for temperature control users who want mesh in TC mode

Freemax Twister Coils Cheap Features

Tea Fibre Wicking Is Not a Gimmick

Freemax patented this blend. 90% tea fibre derived from natural tea tree, 10% organic cotton. Tea fibre absorbs liquid faster and releases it more evenly across the mesh surface than cotton alone. In practice, that means fewer dry spots, less burnt taste towards the end of the coil's life, and a noticeably longer window before flavour degrades. Most vapers report getting an extra two to four days per coil compared to equivalent cotton-only mesh coils at the same wattage.

Quad Mesh Exists for a Reason

The TX4 and X3 coils pack three or four mesh layers into the same coil housing. More mesh surface area means more liquid contact per firing, which translates to denser vapour and stronger flavour at moderate wattages. You do not need quad mesh to enjoy the Fireluke 2. But once you try it, going back to single mesh feels noticeably thinner. The trade-off is marginally shorter coil life at higher wattage, but the tea fibre wicking offsets that.

0.5 Ohm Opens the Range to Lower Wattage

Not every Fireluke user runs at 60W and above. The TNX2 at 0.5 ohm (20-50W) and the NX2 at 0.5 ohm bring the wattage floor down to a range that suits vapers who prefer a cooler, less intense DTL draw. These coils produce less vapour than the 0.15 ohm options but last longer per coil and consume noticeably less e-liquid. If you are conscious of liquid consumption or just prefer a less aggressive hit, the 0.5 ohm options are worth trying.

SS316L for Temperature Control

The TX1 SS316L at 0.12 ohm is the only coil in this range that works in TC mode. Stainless steel changes resistance predictably with temperature, which allows compatible mods to regulate heat output and prevent dry hits automatically. If your mod supports SS TC and you have been running Kanthal coils in VW mode because you did not have a compatible option, this is the one to try.

One Listing Covers a Lot of Ground

Ten coil options. Single mesh (X1, TX1), dual mesh (X2, TX2, TNX2, NX2), triple mesh (X3, TX3), quad mesh (TX4), plus the SS316L variant and the X1-D. Different mesh densities, different resistances, different optimal wattage ranges. The store picker lets you select the exact coil you need without hunting across separate product pages. One listing, one purchase, the right coil.

Freemax Twister Coils Cheap Coil Options

Ten options across the TX and X Series. The coil type determines your mesh density, resistance, and optimal wattage range. Choose based on how you vape.

High-wattage DTL (dense vapour, strong flavour):

• TX1 Mesh 0.15Ω: Single Kanthal mesh, 40-90W. The versatile all-rounder.

• X1 Mesh 0.15Ω: Single Kanthal mesh. Older X Series variant, same resistance.

• X1-D 0.15Ω: Single mesh, different build profile from the standard X1.

Mid-range DTL (balanced vapour and flavour):

• TX2 Mesh 0.2Ω: Dual Kanthal mesh, 40-80W. Two mesh layers for richer flavour.

• X2 Mesh 0.2Ω: Dual Kanthal mesh. X Series version, same resistance.

• TX3 Mesh 0.15Ω: Triple Kanthal mesh, 50-90W. Three layers, maximum surface area.

• X3 Mesh 0.15Ω: Triple Kanthal mesh. X Series counterpart.

Lower-wattage DTL (cooler, gentler draw):

• TNX2 0.5Ω: Dual Kanthal mesh, 20-50W. Lower output, longer coil life.

• NX2 0.5Ω: Dual mesh at 0.5 ohm. Similar to TNX2.

Temperature control:

• TX1 SS316 0.12Ω: Stainless steel mesh. Works in TC and VW mode.

How to Set Up the Freemax Twister Coils Cheap

1. Unscrew the base of your Fireluke 2, Fireluke 3, or compatible tank from the glass section.

2. Remove the old coil. Grip it and pull straight down out of the base. Dispose of it.

3. Prime the new coil. Before installing, put four or five drops of e-liquid directly onto the cotton ports visible through the coil's side openings. This pre-saturates the tea fibre wicking and prevents a scorched first hit.

4. Push the new coil into the base until it seats firmly. It should sit straight with no wobble.

5. Reassemble the tank, fill with e-liquid, and stand it upright for eight to ten minutes. Tea fibre absorbs more slowly than pure cotton on initial saturation. Give it the full time. Start at the low end of the coil's wattage range and work up over the first few draws.

What's in the Freemax Twister Coils Cheap Box

Five identical coils in your chosen resistance and mesh type. Sealed packaging. No tank, no device, no e-liquid. You need a compatible Freemax tank and sub-ohm e-liquid to use them.

The Right Coil for Every Freemax Fireluke and Twister Tank

These coils fit the Freemax Fireluke 2 Tank, the Freemax Fireluke 3 Tank, the Freemax Twister Kit (which ships with the Fireluke 2), and the Freemax Maxus 100W Kit. All four devices use the same coil connection. Any TX or X Series coil from this listing works in any of those tanks. Browse the Vape Coils Collection for other brand options.

E-liquid: use 70/30 or Higher VG Shortfills at 3mg or 6mg freebase. These are sub-ohm mesh coils running at 20W to 90W. Do not use 20mg Nic Salts or high-PG liquids in these coils. The wattage is too high for nic salt, and the coil ports are sized for thicker VG liquids.

About Freemax

Freemax is headquartered in Shenzhen, China, and has been producing vape hardware since 2012. The brand is best known for the Fireluke tank series, which introduced the patented tea fibre cotton wicking that became a defining feature of their coil lineup.

The Fireluke 2, Fireluke 3, Twister, and Maxus kits have all built their reputation on coil longevity and flavour consistency. Freemax was among the earliest manufacturers to adopt mesh coil technology for sub-ohm tanks, and the TX/X Series coils remain some of the most widely recommended sub-ohm coils in UK vape retail.

Stock Up and Save

Coils are the ongoing cost. A single pack lasts two to four weeks depending on how hard you run them and what liquid you use. Grab two or three packs through our Multi-Buy Deals and the per-coil cost comes down. Every coil pack ships sealed in original Freemax packaging to guarantee authenticity. Age-verified checkout, same-day dispatch before 4 pm, full tracking. Over 18s only. Spend over £25 and delivery is free with Free Pirate Vapes.

Conclusion

The Freemax TX and X Series coils do two things well: they last longer than most sub-ohm coils thanks to the tea fibre wicking, and they cover a wider resistance and mesh range than almost any single coil listing on the market.

Ten options from 0.12 to 0.5 ohm, single through quad mesh, Kanthal and SS316L. If you own a Fireluke 2, Fireluke 3, Twister, or Maxus 100W, these are the coils your tank was built around. Pick up a pack at Pirate Vapes.

FAQs

Which tanks do the Freemax Twister Coils fit?

Fireluke 2, Fireluke 3, Freemax Twister Kit, and Freemax Maxus 100W. Same coil connection across all four.

What is the tea fibre wicking?

A patented blend of 90% tea fibre and 10% organic cotton. Absorbs and releases liquid more consistently than cotton alone, which extends coil life and keeps flavour cleaner for longer.

Which coil should I choose?

Depends on your wattage and draw preference. 0.15 ohm TX1 or X1 for versatile 40-90W DTL. 0.2 ohm TX2 for dual mesh flavour at 40-80W. 0.5 ohm TNX2 for lower wattage at 20-50W. TX1 SS316L for temperature control.

Can I use these coils in temperature control?

Only the TX1 SS316L at 0.12 ohm. All other options are Kanthal and VW only.

How long do these coils last?

Most users report one to two weeks per coil at moderate wattage. The tea fibre wicking extends life compared to standard cotton coils. Sweetened liquids shorten it.

What e-liquid should I use?

70/30 or higher VG at 3mg or 6mg freebase. Sub-ohm coils at 20-90W. Not for nic salts or high-PG liquids.