Geekvape Aegis Boost 2 B60 Kit

Drop it. Splash it. Shove it in a rucksack full of tools. The Aegis Boost 2 will not care. Geekvape's IP68-rated pod mod is built from zinc alloy, leather, and silicone, and it is certified waterproof, dustproof, and shockproof. Inside, a 2000mAh battery feeds the AS-Chip 3.0 chipset, which runs five firing modes and pushes up to 60W.

The kit comes with a 2ml top-fill pod and two B Series mesh coils: a 0.2ohm for warmer direct lung hits at 50-58W, and a 0.6ohm for dialled-back vaping around 15-25W. There is a 0.96-inch curved colour display on the front, a physical A-Lock on the side, and top-airflow engineering inside the pod that keeps liquid where it belongs.

Geekvape Aegis Boost 2 B60 Kit Features

IP68 Rated. And It Actually Matters.

Here is the thing about most vape devices: get caught in the rain and you are googling warranty claims by the evening. The Aegis Boost 2 is different. IP68 means tested and certified for dust ingress, water submersion, and impact resistance.

Geekvape sealed the pod recess, added rubberised gaskets around every opening, and reinforced the zinc alloy frame. If your job involves mud, water, sawdust, or heights, this is the device that was designed with your Monday in mind.

Buck-Boost Power That Does Not Fade

A 2000mAh battery is solid on paper. What makes it better here is the circuitry behind it. Geekvape's buck-boost voltage regulation keeps output consistent even when the battery drops below 30%. On cheaper devices, the last quarter of the battery produces noticeably weaker hits. Not here. Your final vape of the day performs the same as the first, which sounds like a small thing until you have lived with the alternative.

Five Modes, But Smart Does the Heavy Lifting

Yes, there are five firing modes. VW for manual wattage control. TC for temperature-sensitive wire. VPC for custom power curves. Boost for maximum vapour output. But honestly? Smart mode is where most people land. It reads the coil, sets the wattage, and you just vape. The other modes exist for vapers who like to tinker, and they work well. But if you want a set-and-forget experience from a 60W device, Smart mode handles it.

That Pod Stays Dry Inside

Geekvape moved the airflow to the top of the pod on the Boost 2. Why does that matter? Because in a traditional bottom-airflow design, gravity pulls liquid toward the air channel. Flip the pod upside down, leave it in a warm car, or lay it flat in a bag, and you get leaks. Top airflow reverses the physics. Air comes in through side vents on the body and reaches the coil from above. The fill port sits on top too. Neat engineering, genuinely practical.

The A-Lock: Borrowed from the L200, Welcome Here

A sliding physical switch on the side. Flick it, and the B60 is locked. Dead. No accidental pocket fires, no wasted battery, no burned coils. Other devices make you press the fire button five times to lock. You forget. Or you do it wrong. Or you just cannot be bothered. The A-Lock is instant, and Geekvape originally developed it for their bigger L200 mod. Bringing it to the Boost 2 was a smart move.

Geekvape Aegis Boost 2 B60 Kit Colours

Refillable pod mod, so the flavour is whatever e-liquid you put in. The 0.6ohm coil pairs nicely with nic salts and 50/50 Blends at lower wattages. The 0.2ohm coil wants High VG Shortfills at 3mg or 6mg to produce proper clouds.

The kit ships in seven colours:

#buttons

• Black
• Rainbow
• Silver
• Red
• Mint Blue
• Gold
• Blue Red

How to Set Up the Geekvape Aegis Boost 2 B60 Kit

More involved than a basic pod kit, but you will have it running in five minutes.

1. Unbox everything. You should have the device, a pod, two B Series coils, a coil tool, and a USB-C cable.

2. A 0.2ohm coil comes pre-fitted in the pod. If nic salts are more your thing, use the coil tool to remove it and press the 0.6ohm coil in instead.

3. Open the fill port on top of the pod. Fill with your chosen e-liquid. Do not go past the 2ml line.

4. Seal the fill port. Now put the filled pod down and walk away for about eight minutes. B Series mesh coils have wide wicking slots. They need proper soaking time, especially the 0.2ohm. Fire it dry, and the coil is done for.

5. Click the pod into the device recess. It seals in firmly.

6. Five clicks on the fire button to power on. The curved display wakes up.

7. Smart mode kicks in by default and reads the coil. Use the two buttons beneath the display if you want to switch modes or manually set wattage.

8. Slide the A-Lock on the side to lock the device between sessions. Get into this habit early.

What's in the Geekvape Aegis Boost 2 B60 Kit Box

You get the: 

• Aegis Boost 2 (B60) device with a 2000mAh built-in battery, 

• one Aegis Boost 2 pod (2ml TPD, top-fill), 

• a 0.2ohm B Series mesh coil already fitted inside the pod (rated 50-58W), 

• a spare 0.6ohm B Series mesh coil (rated 15-25W), 

• a coil removal tool for swapping between the two, 

• a USB Type-C charging cable, 

• and a user manual. 

No e-liquid in the box. Grab a 10ml Nic Salt or a shortfill when you order.

The Perfect Match for the Geekvape Aegis Boost 2 B60: Coils, Pods, and E-Liquids

The Boost 2 runs on Geekvape B Series coils, which are one of the most widely used coil families in the Geekvape Range. You will find them in stock easily because they are not exclusive to the B60. The 0.2ohm mesh coil is designed for direct lung vaping between 50W and 58W with thicker e-liquids. The 0.6ohm handles nic salts and thinner blends between 15W and 25W, and it pairs well with a narrower airflow setting for a restricted draw.

The pod is replaceable too. Over time, the O-rings on the fill port can loosen, or the pod contacts may wear. When that happens, you replace the pod and keep using the device.

One thing to watch: the B60 pod is not the same as the original Aegis Boost pod. Different shape, different coil fitting, redesigned airflow channel. If you are ordering spares, confirm they say Aegis Boost 2 or B60 on the packaging. Any standard USB-C cable works for charging.

About Geekvape

Geekvape has been making vape hardware since 2015, but the Aegis line is what put them on the map. It started with the original Aegis mod, a waterproof box mod that landed at a time when no other brand was even thinking about environmental protection. That focus stuck.

Every Aegis product since has carried IP67 or IP68 certification, and the tri-proof reputation now defines the brand. The AS-Chip platform runs the electronics across their pod mods and Rechargeable Kits, handling everything from basic wattage to full temperature control curves. All Geekvape products sold in the UK are TPD compliant.

Stock Up and Save

B Series coils are the one thing you will always need more of with the Boost 2. Grab a five-pack of Geekvape Coils alongside a spare pod and a few bottles of liquid, and you are set for weeks. Thousands of UK vapers already rely on Pirate Vapes for genuine stock and fast turnaround. Orders over £25 ship free with Free Pirate Post, dispatched same-day before 4 pm. Everything is TPD compliant, age-verified at checkout, and sourced from authorised UK distributors. Over 18s only.

Conclusion

The Aegis Boost 2 does two things no other pod mod in its price range does well. First, the IP68 build means you genuinely do not have to baby it. Second, the AS-Chip 3.0 gives you proper mod-level controls in a body small enough for a jacket pocket.

The B Series coils are proven, the 2000mAh battery lasts, and the A-Lock is one of those features you do not know you need until you have it. For vapers who want more power and durability than a standard pod kit can offer, this is a strong pick. Grab one from Pirate Vapes and pair it with a coil and liquid that match how you like to vape.

FAQs

Is the Geekvape Aegis Boost 2 B60 genuinely waterproof?

IP68 certified, yes. It handles accidental submersion, rain, and splashes. Not designed for swimming with, but it will survive getting dropped in a puddle or left out in a storm.

What coils does the Geekvape Aegis Boost 2 B60 take?

Geekvape B Series mesh coils. The kit ships with a 0.2ohm (50-58W) and a 0.6ohm (15-25W). Other B Series options may be available separately.

Can the Geekvape Aegis Boost 2 B60 handle mouth-to-lung vaping?

Sort of. With the 0.6ohm coil fitted and the airflow slider narrowed, you get a loose MTL draw. It is not as tight as a dedicated MTL pod kit, but it is close enough for most people who prefer a restricted pull.

Does the Geekvape Aegis Boost 2 B60 use the same pod as the original Boost?

No. Completely different pod. Different coil fitting, different airflow design. Original Boost pods and coils do not fit the B60.

What does the A-Lock do on the Geekvape Aegis Boost 2 B60?

It is a physical sliding switch that disables the fire button instantly. Stops the device from firing in your pocket or bag without needing to remember a button-press sequence.