GeekVape Aegis Legend 3 Vape Kit

GeekVape Aegis Legend 3 Vape Kit

A dual 18650 mod pushing 5W to 200W into Geekvape's own Z Fli sub-ohm tank, built inside the rugged IP68 shell the Aegis line is known for. The Aegis Legend 3 is aimed at experienced vapers who want proper DTL power, a tank they can service themselves, and a device that survives real life.

Ships with two mesh coils, a USB-C cable, and a spare parts pack. Ten colours on the picker. Batteries not included. Browse the wider Vape Kits range to compare it against smaller pod setups.

Why vapers choose this:

• Two 18650s, not internal. Swap in fresh cells when the old pair fades, and the mod outlives most kits by years, which is exactly why the Aegis range has the following it does.

• IP68 build. Sealed against water, dust and drops, so it handles a building site, a beach bag, or the back of a van without needing a case.

• 200W ceiling. More headroom than most vapers will ever use, but useful when you want a proper warm DTL cloud on a low-resistance coil.

• Two coils in the box. A 0.15 ohm Z XM coil and a 0.4 ohm Z XM coil to test out different wattage levels.

• Real service kit. Spare O-rings and drip tip in the parts pack, so a small leak is a five-minute fix rather than a new tank.

GeekVape Aegis Legend 3 Features

AS Chip 4.0 With Smart Lock

Powered by the AS Chip 4.0, the mod manages buck-boost voltage stabilisation, temperature protection, and short-circuit safety. It also introduces Geekvape's Smart Lock system, which reads your palm to automatically unlock when held and lock when set down.

IP68 Waterproof and Shockproof Build

Waterproof, dustproof, and shockproof to an IP68 rating, the chassis handles drops and spills without skipping a beat. The shock-absorbing alloy frame protects the internal board from everyday accidents.

Z Fli Tank With Top Filling

Geekvape's Z Fli is a top-airflow, top-fill 2ml sub-ohm tank made for the upgraded Z Series XM coils. Top airflow prevents leaks into the mod, and the flip-top cap makes refills fast. Explore compatible replacements in the Geekvape Coils collection when the included pair wear out.

Two Z XM Mesh Coil Options

The 0.15 ohm Z XM mesh runs between 70W and 85W for warm, dense clouds. The 0.4 ohm Z XM mesh runs between 50W and 60W for a slightly cooler draw that saves battery life. Both feature longer-lasting XM mesh cores.

Six Vaping Modes and Memory Settings

The Aegis Legend 3 features six modes: Power, Smart, Boosting, ECO, TCR, and Memory. Memory mode lets you save up to five custom power settings for instant recall.

GeekVape Aegis Legend 3 Colours

Ten finishes available:

#buttons

• Black
• Blue
• Dark Gray
• Golden Blue
• Green
• Purple
• Rainbow
• Red
• Silver
• Titanium Gray

What Is In the Box

• 1 x Geekvape Aegis Legend 3 mod

• 1 x Geekvape Z Fli tank

• 1 x Geekvape Z0.15 XM Coil (0.15 ohm mesh, pre-installed)

• 1 x Geekvape Z0.4 XM Coil (0.4 ohm mesh, spare)

• 1 x Spare parts pack (O-rings, seals)

• 1 x USB Type-C charging cable

• 2 x User manuals

Batteries are not included. You will need two 18650 cells rated for high-drain use before the mod will fire.

Setting Up the Aegis Legend 3

1. Charge two high-drain 18650 batteries on an external charger. Match the pair for age and charge level.

2. Install the batteries following the +/- markings inside the door.

3. Unscrew the top cap of the Z Fli tank and pull the drip tip off if that helps you fill.

4. Fit your chosen coil into the base of the tank.

5. Prime the coil with four to five drops of e-liquid directly onto the exposed wicking ports.

6. Fill the tank to just below the max line. Leave a small air gap.

7. Reassemble and let the whole thing rest for six or seven minutes. Cold cotton needs time to soak through properly, or you will burn the coil on the first draw.

8. Start at the lower end of the coil's wattage window and step up in 5W increments until the flavour lands where you want it.

What Liquids Pair Well

DTL sub-ohm coils want higher-VG blends. Reach for a 70-30 shortfill or a high VG blend rather than a 50/50 nic salt. The 70-30 Shortfills collection lists everything sized for direct-to-lung setups, and the 50ml Shortfills range covers the popular short-and-add-a-shot format.

If you want lower nicotine at higher volumes, look at the High VG E-Liquid options. Nic salts at 20mg are not the right match for a 0.15ohm coil at 60W, so keep the Nic Salts range for a separate MTL device.

About Geekvape

Geekvape has been building rugged, high-power vape gear out of Shenzhen since 2015. The Aegis line is their flagship platform and the one that made the brand's name with UK vapers who wanted something that would not die if it hit the ground.

The Legend series is the dual-battery flagship, now on its third iteration. Solid record for firmware updates and coil support.

Why Buy From Pirate Vapes

Every kit ships from a UK warehouse with same-day dispatch on orders placed before 4 pm and Free Pirate Post over £40.

Checkout is age-verified, all stock is genuine UK-market product, and the coils used inside the Z Fli tank are TPD compliant. Nicotine products carried at Pirate Vapes are MHRA-notified where required. Over 18s only.

Conclusion

The Aegis Legend 3 is the kit to pick if you want dual-battery power, IP68 durability, and a tank that takes serviceable mesh coils. Not the right pick if you want something pocketable or something that runs on internal charging.

If it fits the way you vape, restock replacement coils from the Geekvape Coils range, and browse the wider Pirate Vapes catalogue for pairing options across tanks, liquids and pods.

FAQs

Does it come with batteries?

No. You need two 18650 high-drain cells before it will fire, sold separately.

What coils does it use?

The Z Fli tank uses Geekvape Z Series coils. The kit comes with a 0.15 ohm Z XM coil and a 0.4 ohm Z XM coil to get you started.

Is it really waterproof?

Rated IP68, so sealed against dust and short-term submersion. Sensible caution still applies. Do not go swimming with it.

What wattage should I run it at?

Follow the wattage stamped on the coil. The 0.15 ohm Z XM runs best between 70W and 85W, while the 0.4 ohm Z XM works best between 50W and 60W.

Can I use nic salts in it?

Not really. Sub-ohm coils and 20mg salts do not mix. Stick to lower-nicotine 70-30 shortfills or high-VG blends designed for DTL vaping.

How long do the coils last?

Depends on the liquid and how hard you push them. Two weeks is typical on clean shortfills at sensible wattage. Dark, heavily sweetened liquids will shorten that.