Geekvape Digi Pro Pod Mod Kit

Geekvape Digi Pro Pod Mod Kit

A 0.96" touch screen on a pod kit is still rare, and that is where the Digi Pro starts. Geekvape pairs it with a 2000mAh battery, 40W of adjustable output, and four coil resistances from 0.4ohm to 1.2ohm, so one device covers a tight MTL draw and a warmer restricted-lung pull.

The 2ml refillable pod fills from the top, the airflow adjusts up top too, and it fires on auto-draw or button. Add USB-C fast charging, an RGB light strip, and eight colours, and it reads as a proper little pod mod rather than a starter toy.
See the full Geekvape Range or more Refillable Pod Kits.

Why vapers choose this:

• A touch screen and multi-mode output, which puts wattage, airflow and settings under your control rather than locking you to one fixed draw

• Four resistances from 0.4ohm to 1.2ohm, covering everything from a cigarette-style MTL pull to a warmer restricted-lung hit

• 2000mAh with USB-C fast charge, so all-day use and quick top-ups are both covered

• Top-fill, top-airflow pod. Less mess, easy adjustment

• Auto-draw or button. Vape however you prefer without changing devices

Geekvape Digi Pro Pod Kit Features

0.96" Touch Screen

Plenty of pods slap a screen on for show. The Digi Pro's 0.96" touch screen genuinely does something: it reads out battery, wattage, and mode, and lets you adjust settings by tapping rather than clicking through menus. Combined with the multi-mode output, you get proper control in a device that still fits in a palm.

Two Coil Options

This is the part that matters. Drop in the 1.2ohm, and it behaves like a tight MTL kit, ideal with nic salts. Fit the 0.4ohm at higher wattage, and it opens into a warmer, airier restricted-lung vape. Few pods at this size flex that far, which is why it works as an MTL Vape Kit option and something looser in the same shell.

Easy Pod Refilling

The 2ml pod tops up in seconds through its fill port. Match the liquid to the coil: Nic Salts or 50/50 for the higher-ohm MTL pods, and a slightly higher-VG blend for the 0.4ohm if you want more vapour. Get that pairing right, and the flavour is where this kit quietly shines.

2000mAh Battery

A flat 2000mAh battery is back in action quickly thanks to 5V/1.6A USB-C charging, with the cable included. The screen shows the charge level as it fills, so there is no guesswork. For a device you lean on all day, quick turnaround matters just as much as raw capacity.

A-Lock and Top Airflow

The A-lock system stops accidental firing in a pocket or bag, and the RGB light strip is there if you want it. Top airflow keeps the pod from leaking downward the way side-airflow pods can. Small touches, but they add up to a kit that holds up to daily carry.

Geekvape Digi Pro Pod Mod Kit Colours

Eight finishes in the picker, all the same device underneath, so choose on looks.

#buttons

• Black
• Gunmetal Grey
• Lavender Haze
• Misty Blue
• Moon Silver
• Pearl White
• Ruby Red
• Sakura Pink

How to Set Up the Geekvape Digi Pro

Quick to get going. A few minutes, most of it just letting the coil soak.

1. Charge the device fully over USB-C using the included cable before first use.

2. Slide or lift the top-fill port cover on the pod (you do not need to pull the pod out of the device).

3. Fill the 2ml pod with e-liquid matched to your cartridge, avoiding the central airflow tube, and close the port securely.

4. Stand the device upright for five to ten minutes so the cotton completely saturates. Firing a dry coil will instantly ruin it.

5. Set your wattage and airflow on the screen, then draw on the mouthpiece to auto-fire or hold the button.

What's in the Geekvape Digi Pro Box

• The Digi Pro device,

• two J cartridges (a 0.4ohm and a 0.6ohm, each with an integrated coil),

• a USB-C cable,

• a promotional card pack,

• and a manual.

No e-liquid is included, so pick up a bottle to match the coil you want to start on.

Made for Geekvape's J and JR Cartridges

The Digi Pro runs Geekvape's J and JR cartridge system. The included J cartridges carry an integrated coil, so a fresh flavour means a fresh pod. The empty JR cartridges take separate replaceable coils, which is where a set of Geekvape J Series Coils comes in if you prefer swapping just the coil. Keep spare replacement pods or coils on hand either way.

What it does not take: pods or coils from other brands or older Geekvape platforms (like the Q series or Aegis Boost). It is specific to the J and JR series.

About Geekvape

Geekvape built its name on rugged, well-engineered hardware, and the Digi line brings that thinking to the pod-mod format. Rather than a sealed, one-setting pod, the Digi Pro leans on adjustability: a touch screen, multiple modes, a spread of resistances, and cross-compatible cartridges.

It is aimed at vapers who have outgrown a basic pod but do not want a full box mod. That balance of control and simplicity is why the Geekvape kit continues to be a dependable pick at Pirate Vapes.

Stock Up and Save

A device like this is worth setting up properly from the start. Grab a couple of spare cartridges, a coil pack for the JR pods, and a bottle or two of liquid, and you have a complete kit ready to run for months.

Buying it together works out cheaper across our Multi-Buy Deals. Every order from Pirate Vapes ships same day when placed before 4 pm, in padded packaging. All stock passes through an age-verified checkout and is strictly over-18s only.

Conclusion

The Geekvape Digi Pro is a strong pick for anyone who wants a pod that thinks like a mod: a 2000mAh battery, 40W output, a 0.96" touch screen, four resistances, and a 2ml refillable pod that fills from the top.

Run it tight with nic salts or loosen it off for a warmer draw, all from one device. If a basic pod feels limiting but a full mod feels like too much, this lands neatly in between. Pick up cartridges, coils and gear from Vape Accessories at Pirate Vapes.

FAQs

Does the Digi Pro come with e-liquid?

No. The 2ml pod ships empty, so you fill it with your own liquid and choose the flavour and strength to suit the coil you are using.

What is the difference between the J and JR cartridges?

The J cartridge has a built-in coil, so you replace the whole pod. The JR cartridge takes a separate replaceable coil, so you keep the pod and swap only the coil.

Can the Digi Pro do both MTL and DL?

Yes. The 1.2ohm gives a tight MTL draw, while the 0.4ohm at higher wattage opens into a warmer restricted-lung vape. The adjustable airflow fine-tunes it either way.

How do I charge the Digi Pro and how long does it last?

Over USB-C, with the cable included. The 2000mAh battery covers a day of moderate use, and fast charging gets you back up quickly.

What e-liquid should I use with the Digi Pro?

Match it to the coil. Nic salts or 50/50 for the higher-ohm MTL pods, and a higher-VG blend for the 0.4ohm if you want more vapour and a looser draw.

Is there a lock to stop the Digi Pro firing in my pocket?

Yes. The A-lock system prevents accidental firing when the device is stowed away.