Geekvape Obelisk 65 Pods

Geekvape Obelisk 65 Pods

A cracked or tired pod is usually all that stands between an Obelisk 65 and another few months of service. This is the refill pod that brings it back. The Geekvape Obelisk 65 pod holds 2ml in the UK and fills from the top through a simple port. Coils are not built in.

The pod takes the Geekvape B Series coils, which press-fit into the base and are bought separately. A magnetic base drops it into the Obelisk 65 and the 65 FC. It is sold singly, as a pack of 1. More spares sit in the Replacement Pods.

Why vapers choose this:

• Genuine Obelisk 65 fitment means the pod seats on the same magnetic connection and takes the same B Series coils as the cartridge that came with your kit, with no loose fit.

• 2ml TPD-compliant capacity keeps the pod legal for UK sale while holding a full session of liquid.

• B Series coil support lets one pod run anything from a low-resistance DTL coil to a tighter higher-ohm option.

• Top airflow ring carries over the draw adjustment on the pod itself, so a fresh cartridge behaves like the original.

• Top-fill port refills without pulling the coil, which keeps the swap quick and clean.

Geekvape Obelisk 65 Pod Features

2ml Refillable Cartridge

The Obelisk 65 pod carries a 2ml capacity, the UK maximum for a nicotine pod. A fresh cartridge is the fix when an older one starts to leak, mute the flavour or lose its seal, and it costs a fraction of a new device. Fill it with your own liquid rather than buying sealed refills.

Top Airflow Adjustment

The pod carries a top airflow ring that tightens or opens the draw. Set it narrow for a more restricted inhale or wider for an airier one. Because the control is on the pod, each new cartridge restores the same range of draw settings you had before.

Geekvape B Series Coil Compatibility

These Obelisk 65 pods are built for the Geekvape B Series coils, which press-fit into the base of the pod. That range spans low-resistance heads for direct-to-lung clouds through to higher-resistance coils for a tighter draw. Stock matching heads from the Geekvape Coils Collection.

Magnetic Pod Connection

A magnetic base holds the pod in the Obelisk 65 and lifts out cleanly for refilling or coil changes. There are no threads to align, so the pod drops in and clicks home in one movement.

Top-Fill E-Liquid Port

Refills happen from the top. Open the fill port, add your liquid, and close it, with the coil left undisturbed in the base. The top-fill design is the practical detail that keeps refills tidy between sessions.

Geekvape Obelisk 65 Compatible Coils

The Obelisk 65 pod takes the Geekvape B Series coils, which is where you set the vaping style. Coils press-fit into the base and are sold separately from the pod.

The 0.2ohm B Coil runs at higher power for direct-to-lung clouds and suits high-VG liquid. The 0.4ohm B Coil is the balanced middle choice for flavour and vapour at moderate wattage. Higher-resistance B coils such as the 0.6ohm pull a tighter, more restricted draw for vapers who prefer nic salts or 50/50 juice.

#buttons

• 0.2ohm B Coil
• 0.4ohm B Coil
• 0.6ohm B Coil

How to Swap Your Obelisk 65 Pod

Fitting a fresh pod and coil takes a couple of minutes.

1. Lift the old pod out of the Obelisk 65 to release the magnetic connection.

2. Press-fit a B Series coil firmly into the base of the new pod until it seats fully.

3. Open the top-fill port and add your e-liquid up to the 2ml line, then close it.

4. Stand the filled pod upright for a few minutes so the coil wicks soak before the first draw.

5. Drop the pod back into the device until the magnets hold, set the airflow ring, and start at a lower wattage.

What's in the Geekvape Obelisk 65 Pod Box

A single pack gives you one replacement cartridge.

• 1x Geekvape Obelisk 65 replacement pod (2ml)

Coils, e-liquid, and the Obelisk 65 device are not included and are bought separately.

Made for the Obelisk 65 and 65 FC

This replacement pod is made for the Geekvape Obelisk 65 and the Obelisk 65 FC, and it runs the Geekvape B Series coil range. It is the correct cartridge for those devices and restores full performance when an original pod wears out.

It is not interchangeable with pods from other Geekvape systems such as the Aegis or Wenax lines, even where the coils look similar, so confirm your device is an Obelisk 65 before ordering. For the wider hardware range, see the Geekvape Collection.

About Geekvape

Geekvape is known in the UK for rugged, well-built hardware, and the Obelisk line sits at the more refined end of that reputation.

The Obelisk 65 pairs a pod-mod format with the brand's B Series coil platform, which means owners get a shared ecosystem of coils and pods rather than a one-off cartridge.

That platform approach is why spares for the Obelisk 65 stay easy to source, and it is why Pirate Vapes keeps the pods and matching B Series coils listed together for the device.

Stock Up and Save

Refill pods wear out with use, so a spare in the drawer keeps your Obelisk 65 running without a gap. Pirate Vapes stocks these Geekvape pods through an age-verified checkout, with Free Pirate Post on orders over £40.

Pairing a pod with your next set of B Series coils and a bottle of juice keeps the whole setup ready, and regular refills are a natural fit for The Crow's Nest subscription. Browse bundle pricing in the Multi-Buy Range.

Conclusion

The Obelisk 65 replacement pod is the simple way to keep a Geekvape Obelisk 65 or 65 FC in service, with a 2ml TPD-compliant capacity, a top airflow ring and support for the full B Series coil range. Fit your preferred coil, fill it from the top, and you are back to a clean draw.
Keep spares handy alongside your coils in the Vape Accessories, pair them with a suitable juice from the Nic Salts Range and shop the full range at Pirate Vapes.

FAQs

What capacity is the Geekvape Obelisk 65 pod?

The UK Obelisk 65 pod holds 2ml, the legal maximum for a nicotine cartridge. It fills from the top through a dedicated port, so you do not remove the coil to refill.

Which coils fit the Obelisk 65 replacement pod?

The pod takes the Geekvape B Series coils, including the 0.2ohm and 0.4ohm heads, which press-fit into the base. Coils are sold separately from the pod.

Does the Obelisk 65 pod come with a coil fitted?

The pod is supplied as a single cartridge, and coils are bought separately, so fit your chosen B Series resistance before first use. Confirm the pack contents on the product page if you need a coil included.

Is the Obelisk 65 pod good for MTL or DTL vaping?

The Obelisk 65 pod handles both, set by the coil and the top airflow ring. A low-resistance B coil with open airflow suits DTL, while a higher-resistance coil and a tighter ring give a more restricted draw.

How do I refill the Geekvape Obelisk 65 pod?

Open the top-fill port, add your e-liquid up to the 2ml mark, and close it. The pod fills from the top with the coil left in place, so refills stay quick and clean.

How often should the Obelisk 65 pod be replaced?

Replace the pod when it clouds, leaks, or the flavour drops off even after fitting a fresh coil. The coil itself is changed more often than the pod, so one cartridge usually outlasts several coils.