Geekvape P Series Replacement Coils

Three mesh coils, all DTL, all built to push vapour at higher wattages. The 0.2 ohm runs at 60 to 70W for serious cloud. The 0.4 ohm sits at 50 to 60W and fits the widest range of Geekvape devices. The 0.5 ohm drops to 40 to 50W for a slightly cooler draw on the Obelisk 60.

Geekvape added an anti-spit-back mesh core across the range, which keeps condensation out of the mouthpiece. Kanthal wire. Organic cotton. Press-fit. Sold in packs of 5. Pirate Vapes ships them age-verified across the UK.

Why vapers choose this:

• Anti-spit-back mesh core keeps condensation out of the mouthpiece.

• Three wattage bands from 40W to 70W covering moderate and heavy DTL.

• Kanthal mesh heats fast and produces dense, flavourful vapour.

• Press-fit in and out in seconds, no threading.

• Five to a pack, lasting one to two weeks each at daily DTL use.

Geekvape P Series Replacement Coils Features

Anti-Spit-Back Mesh

The standout feature. Geekvape designed the mesh core to prevent condensation from pooling at the top and spitting hot liquid into your mouth when you draw. If you have ever experienced that unpleasant pop of hot juice on the tongue, the P Series is engineered to stop it. It works by channelling condensation away from the airpath before it reaches the mouthpiece.

0.2, 0.4 or 0.5, and Which Fits What

The P0.4 is the most versatile: it fits the Aegis Boost Pro, B100, XP77, B21700, Obelisk 60 and Z100 DNA. The P0.2 fits the Aegis Boost Pro, B100, XP77 and B21700 but not the Obelisk 60. The P0.5 fits the Obelisk 60 only. If you want one coil that works across the most devices, the P0.4 is the pick.

Kanthal Mesh, Proven Material

All three coils use KA1 Kanthal mesh, which is a reliable heating material that ramps up quickly and handles high wattage without degrading fast. Paired with organic cotton wicking, the combination produces clean, neutral flavour and dense vapour. Nothing exotic, just materials that work well at 40W and above.

Press-Fit, No Threads

The coil pushes into the pod base and holds by friction. Pull to remove, push to install. The fit is snug enough to stay put during heavy use and loose enough that you do not need to wrestle it out when changing. A few seconds, one hand, done.

High-VG Only

At 40W to 70W, these coils need thick juice. A 70-30 Shortfill or max-VG blend feeds the mesh properly and keeps the flavour full. Thin 50/50 juice floods the mesh at these wattages, causing leaking and muted taste. Stick to 70% VG or higher.

Geekvape P Series Replacement Coils Resistance Options

No flavour to choose from. These are empty coils; you fill the pod yourself. Three options, and compatibility varies.

• 0.2 ohm - 60 to 70W, the most powerful, big warm clouds (fits Aegis Boost Pro, B100, XP77, B21700)

• 0.4 ohm - 50 to 60W, the all-rounder, fits the widest range of devices

• 0.5 ohm - 40 to 50W, a slightly cooler DTL draw (fits Obelisk 60 only)

All three suit High-VG E-Liquid at 70% VG or above. Freebase at 3 to 6mg is the standard pairing. Browse our e-liquid collection for the right bottle.

How to Set Up the Geekvape P Series Replacement Coils

1. Pull the pod off your device and remove the old coil from the base.

2. Push the new P Series coil firmly into the pod base until it stops.

3. Put a little juice onto the mesh visible through the side openings to start the wick.

4. Refit the pod, fill with high-VG e-liquid, and leave it for five minutes before the first draw.

5. Start at the low end of the coil's wattage range and work up.

What's in the Geekvape P Series Replacement Coils Box

Five mesh coils in the resistance you choose. No pod, no device, no e-liquid. You will need a high-VG juice to fill the pod; a Shortfill is the usual choice at these wattages.

Designed for the Geekvape Aegis Boost Pro, B100, XP77 and Obelisk 60

The P Series coil is Geekvape's DTL coil for its pod mod range, but not every coil fits every device. 

The P0.4 is the safest bet if you want the widest compatibility. The P0.5 is limited to the Obelisk 60. The P0.2 covers the Aegis Boost Pro family and the XP77 but skips the Obelisk. 

Check your device name before ordering. You will find the coils and the kits in our Geekvape Range, with the full selection in our coils collection.

About Geekvape

The Aegis name means durability, and the P Series coil is the DTL engine behind some of the toughest pod mods Geekvape makes. The Boost Pro, the B100 and the XP77 are all built to survive drops, dust and water, and the P coil matches that toughness with an anti-spitback mesh that handles heavy use cleanly.

Geekvape is not the flashiest brand, but for vapers who need a pod mod that works hard in real conditions, the Aegis platform and its P Series coils are a dependable combination.

Stock Up and Save

The P0.4 is the one to bulk-buy if you switch between devices, since it fits the widest range. Five coils last a month at moderate DTL use. Pair with a few bottles from our Multi-Buy Deals and the running cost stays reasonable even at higher wattage. Genuine Geekvape, dispatched tracked, age-verified checkout. Over 18s only.

Conclusion

Three mesh coils, anti-spit-back technology, and a wattage range that covers 40W to 70W DTL. The P0.4 fits most devices and is the safe all-round pick. The P0.2 pushes harder for bigger cloud. The P0.5 suits the Obelisk 60 at lower power.

Check your device, pick your resistance, and keep a 5-pack in the drawer. Grab yours from Pirate Vapes with fast, age-verified UK delivery.

FAQs

Which P coil fits the most devices?

The P0.4 at 50 to 60W. It works with the Aegis Boost Pro, B100, XP77, B21700, Obelisk 60 and Z100 DNA. The P0.2 fits fewer, and the P0.5 only fits the Obelisk 60.

What is the anti-spit-back feature?

The mesh core is designed to channel condensation away from the airpath so hot liquid does not spit into your mouth when you draw. It is built into all three coils.

Can I use nic salts in these?

Not at these wattages. At 40W and above, nic salt strengths produce far too much vapour and throat hit. Use freebase e-liquid at 3 to 6mg in a high-VG ratio.

Are these the same as M Series coils?

No. P Series coils fit the Aegis Boost Pro pod mod range. M Series coils fit the Z Max tank. They are different sizes and are not interchangeable.

How long does a coil last?

One to two weeks of daily DTL use. Sweet or dark juices shorten the life. Lighter juices and moderate wattage stretch it further.

What VG ratio should I use?

70% VG or higher. Thin 50/50 juice floods the mesh at these wattages, causing leaking and weak flavour.