Geekvape Wenax M1 Pod Kit

34 grams. That is it. The Geekvape Wenax M1 is one of the lightest Refillable Pod Kits you can buy in the UK, and the narrow body sits more like a pen or a thin cigar in your hand than a typical pod device. No buttons. No screen. No settings. The 800mAh battery handles power automatically, reading the pod's resistance and setting the output somewhere between 9 and 16W without you doing a thing.

Ships with a 0.8-ohm pod (2ml TPD, built-in mesh coil, side-fill). The 1.2-ohm pod is available separately for a tighter draw. Draw-activated. USB-C. Magnetic pod connection. Pirate Vapes stocks all seven colours. TPD compliant, over 18s only.

Why vapers choose the Geekvape Wenax M1 Pod Kit:

• 34 grams disappears in a pocket. Lighter than most lighters. The narrow aluminium body fits between two fingers like a pen and does not produce the rectangular bulge that wider pod kits create in a jacket pocket.

• No buttons, no screen, no settings to learn. Inhale and it fires. Stop inhaling and it stops. The adaptive power reads the pod and picks the wattage. Your involvement in the process is zero beyond filling and inhaling.

• 800mAh battery rated for up to two days. At 14-16W through a 0.8-ohm coil, the battery drains slowly. Most daily MTL vapers get a full day comfortably. Lighter users can push to two days without charging.

• Clear pod shows your liquid level at a glance. The transparent pod body lets you check how much is left without pulling anything out. When the liquid drops below the coil intake, top it up through the side fill port.

• Magnetic pod snaps in and out in a second. The magnet holds the pod firmly during pocket carry. Pull to remove, push to insert. No threading, no twisting, no alignment issues.

Geekvape Wenax M1 Pod Kit Features

Adaptive Power Technology

The Wenax M1 reads the resistance of the installed pod and selects the wattage automatically. For the 0.8-ohm, it sits around 14-16W. For the 1.2-ohm, around 9-12W. There is no manual override and no way to adjust it. The advantage: every puff comes out at the same intensity, and the device holds that output consistently as the battery drains rather than tapering off toward the end of a charge.

Draw-Activated Firing with 10-Second Cutoff

Inhale on the mouthpiece and the device fires. No button, no click sequence, no power toggle. A 10-second auto-cutoff prevents the coil from firing continuously if something blocks the airflow sensor. The draw activation on the Wenax M1 responds quickly. There is no noticeable lag between inhaling and the coil reaching temperature, which matters for vapers who are used to the instant hit of a disposable.

34g Aluminium Body with Cigar Profile

The Wenax M1 is shaped like a narrow cigar rather than a flat rectangle. The aluminium alloy body gives it enough weight to feel real without making it heavy. At 16mm wide and 115.5mm long, it is one of the narrowest Pod Kits on the UK market. The mouthpiece has a rubberised lip section for comfort during extended sessions. Geekvape says you can hold it between your lips hands-free the way you would a cigarette.

Clear-View Pod with Side-Fill

The pod is built from transparent material so you can see exactly how much liquid remains. The side-fill port sits under a rubber bung on the side of the pod. Peel it back, fill to the 2ml line, close it. The bung creates a firm seal. You can fill while the pod is still in the device, though removing it gives you a better angle.

Magnetic Pod Connection

The pod clicks into the top of the Wenax M1 via magnetic contacts. The fit is secure enough for pocket carry and daily handling but loose enough to pull free with two fingers when you need to swap. The magnets self-align the pod, so there is no wrong way to insert it.

Geekvape Wenax M1 Pod Kit Colours List

Seven finishes across the range. The aluminium body gives each colour a metallic quality with a slim, pen-like profile. The gradient options shift between two tones along the length of the device.

#buttons

• Black
• Gun Metal
• Red
• Blue Gradient
• Gradient Gold
• Orange Gradient
• Red-Blue

How to Set Up the Geekvape Wenax M1 Pod Kit

1. Charge. The USB-C port is on the base. The cable is not included, so use your own. The LED flashes during charging. Under an hour from flat to full.

2. Fill. The 0.8-ohm pod comes pre-installed. Find the rubber bung on the side of the pod, peel it back, and squeeze your nic salt or 50/50 e-liquid in up to the 2ml line. Close the bung firmly.

3. Prime. Let the filled pod sit for ten minutes so the built-in mesh coil fully saturates. This is especially important on the first fill. Skipping it risks a burnt first draw.

4. Check the pod is seated. The magnets should hold it firmly. Give it a gentle pull to make sure it does not come loose.

5. Vape. Inhale through the mouthpiece. The device fires automatically. No button. No switch. No power-on sequence.

What's in the Geekvape Wenax M1 Pod Kit Box

You get the Wenax M1 device (aluminium body, 800mAh battery, LED indicator) in your chosen colour and one 0.8-ohm Wenax M1 pod (2ml, built-in mesh coil, side-fill, clear-view body). A user manual is included. No USB-C cable is included. You need your own to charge the device. Browse Nic Salt E-Liquids at Pirate Vapes for your first fill.

Built Specifically for Wenax M1 Replacement Pods

The Wenax M1 uses its own dedicated pods. They do not cross with any other Geekvape device.

Available Pods:

• 0.8Ω Wenax M1 Pod (included): MTL at 14-16W. Built-in mesh coil, side-fill, 2ml TPD. Best with nic salts and 50/50

• 1.2Ω Wenax M1 Pod (sold separately): Tighter MTL at 9-12W. Cooler, firmer draw, closest to a cigarette pull. Best with nic salts at 10-20mg

• Filtered versions of both pods also available (charcoal filter in the drip tip for smoother draw)

Not Compatible:

• Wenax Q pods (different shape)

• Wenax K1/K2 pods (different platform)

• Wenax S1/S3/S-C pods (different form factor)

• Any non-Geekvape pod

About Geekvape

Geekvape launched in 2015 and built their name on the Aegis range of rugged box mods before expanding into the pod kit market. The Wenax M1 sits at the simple end of their lineup: no buttons, no settings, no waterproofing.

Just a lightweight MTL pen that does one job and does it cleanly. The Wenax range now includes the M1, M1 Mini, Q, S1, S3, S-C, and K1/K2 across a spread of MTL and RDL draw styles. Browse the full Geekvape Vapes collection at Pirate Vapes.

Stock Up and Save

The Wenax M1 ships with one pod. That covers roughly a week or two. At Pirate Vapes, we stock both the 0.8-ohm and 1.2-ohm Wenax M1 pods so you can grab spares alongside the kit. We pack every order carefully because the Wenax M1 is lightweight and the pods are delicate. Every pod and device is TPD compliant, MHRA-notified, and factory-sealed. Same-day dispatch before 4pm. Free Pirate Vapes over £25.

Conclusion

34 grams. No buttons. No settings. Under an hour to charge. Up to two days on a single battery. The Geekvape Wenax M1 is one of the simplest and lightest refillable pod kits you can buy, and it does not sacrifice battery life or flavour to get there. The 0.8-ohm pod delivers clean MTL nic salt flavour.

The 1.2-ohm tightens the draw further. And the clear-view pod means you never run dry without noticing. If you want a pen-style pod kit that genuinely disappears in a pocket, pick one up from Pirate Vapes and pair it with a nic salt from our refillable pod kits collection.

FAQs 

Is the USB-C cable included? 

No. The kit includes the device, one pod, and a user manual. You need your own USB-C cable to charge.

What pods does this use? 

Wenax M1 pods only. Available in 0.8Ω and 1.2Ω, plus filtered versions of each. They do not cross-fit with any other Geekvape device.

How long does the battery last? 

The 800mAh battery is rated for up to two days of moderate use. Most daily MTL vapers get a full day per charge. Heavy users may need to top up in the evening.

What e-liquid should I use? 

Nic salts and 50/50 blends. The 0.8 and 1.2-ohm coils are designed for thin MTL liquids. High VG (70/30 or thicker) will not wick properly and will cause dry hits.

How do I fill the pod? 

Peel back the rubber bung on the side of the pod. Squeeze your e-liquid in up to the 2ml line. Close the bung firmly. You can fill while the pod is in the device or remove it first.

How heavy is it? 

34 grams. One of the lightest refillable pod kits available in the UK. The aluminium body keeps it sturdy without adding bulk.