HorizonTech Falcon Replacement Coils

HorizonTech Falcon Replacement Coils

The HorizonTech Falcon Replacement Coils are 0.15ohm and 0.16ohm mesh coils built for a direct-to-lung draw from a sub-ohm tank, with 3 coils in each pack. Five coil types are listed, and all of them are made for high-VG e-liquid.

Types M1, M2, M1+, M6 and M8 are offered, and each one is fitted to the original Falcon tank or the Falcon Legend. Spent coils are swapped for fresh ones, while the tank keeps being refilled with ordinary e-liquid, so no pod, battery or charger comes into it. Each type is picked by its name and resistance.

What to Know About the Falcon Replacement Coils

• 3 coils in every pack, all of one type
• 5 coil types: M1, M2, M1+, M6 and M8
• 0.15ohm and 0.16ohm mesh coils for sub-ohm DTL vaping
• Made for high-VG e-liquid
• Fits the Falcon tank and Falcon Legend, not the Falcon 2

Features of HorizonTech Falcon Replacement Coils

One mesh design and one job are shared by all five coil types: refreshing a Falcon tank once the old coil has lost its flavour. Build, ratings and fit are covered below, and wider Vape Coils options sit elsewhere on the store.

Mesh Heating Element

A mesh surface takes the place of round wire in all five coil types. Heat is spread over a larger area of the wick by the flat mesh, which suits the low resistance and the direct-to-lung draw these coils are rated for. Falcon mesh coils of this build are used with high-VG e-liquid.

Five Coil Types

Packs are sold as the M1, M2, M1+, M6 and M8. M1, M6 and M8 are rated at 0.15ohm, while M2 and M1+ are rated at 0.16ohm. A recommended power range is given for each type, so the mod is set to suit the type that is fitted.

Sub-Ohm Direct-to-Lung Draw

Resistances this low give a large, airy draw straight into the lungs instead of the restricted feel of mouth-to-lung vaping. High-VG e-liquid is recommended for the wick, and the coils belong in a tank made for direct-to-lung use, like those in the DTL Tanks range.

Pack of 3

Each pack holds three coils of the chosen type, so a spare or two stays on the shelf. Fading flavour, a burnt taste and gurgling from the tank are the signs of a spent coil. Replacing Falcon tank coils at that point gives the tank a fresh start without a change of liquid.

Falcon and Falcon Legend Fit

The coils are matched to the original Falcon tank and the Falcon Legend. They are not a fit for the Falcon 2, which uses its own coils. Which family a tank belongs to is settled by the model name printed on it, before a type is chosen.

Falcon Replacement Coil Resistance Options

M1, M6 and M8 sit at 0.15ohm, the lowest rating in the range, while M2 and M1+ sit at 0.16ohm. Every type is a mesh coil built for a direct-to-lung draw.

#buttons

• 0.15 Ohm M1
• 0.15 Ohm M6
• 0.15 Ohm M8
• 0.16 Ohm M1+
• 0.16 Ohm M2

How to Fit the Falcon Replacement Coils

Changing Falcon coils takes a few minutes and needs no tools beyond the tank itself. The same steps apply to all five types.

Step 1: Take the tank off the mod, empty any e-liquid and open the base as the tank's manual describes.

Step 2: Lift out the spent coil and note how it sits in the base.

Step 3: Seat the new coil in the same position, then close the base.

Step 4: Refill the tank using a high-VG liquid, then wait briefly so the coil can absorb it before the first pull.

Step 5: Set the mod within the range for the type fitted, begin at the low end and raise the power slowly.

What's in the Falcon Replacement Coils Pack

Each pack is a set of three coils in the type selected at checkout, and nothing else is supplied with them.

• 3 mesh coils of the selected type

The tank, mod, e-liquid and any batteries are not included.

Devices Compatible With the Falcon Replacement Coils

The coils are made for the original Falcon tank and the Falcon Legend, and all five types are stocked for both. Horizon Falcon coils of this kind are not interchangeable with the Falcon 2, which is supplied with its own coil range.

Check the tank first. The model name printed on it should be read before ordering, since Falcon tanks look alike across generations. More HorizonTech options are grouped in the Horizontech Coils collection, and a compatible tank is needed to use any of them.

About HorizonTech and the Falcon Tank Range

Each Falcon coil is given a short letter-and-number code by HorizonTech, and the five stocked here all carry the M prefix used for its mesh types. The original Falcon and the Falcon Legend share this coil family, while the Falcon 2 moved to a separate coil range.

Why the code matters more than the tank's colour or trim is explained by that split. Owners who run other Vape Tanks can use the same habit of checking the coil family before buying.

Order From Pirate Vapes

Two packs in different types let the M1 and the M6 be compared on the same tank, while a first fill of High VG E-Liquid can be added to the same basket.

Orders over £40 travel with Free Pirate Post, and Pirate Vapes dispatches orders placed before 3:30pm on Monday to Friday the same day through Royal Mail Tracked 24. Weekend and bank holiday orders leave on the next working day, and an age check is completed before any order is dispatched, with sales limited to over-18s.

Conclusion

The HorizonTech Falcon Coils suit owners of the Falcon and Falcon Legend who want a mesh, sub-ohm coil in one of five types. They are hardware for adults aged 18 and over only, and the tank is bought separately.

More extras are grouped under Vape Accessories, and everything else in the range can be reached from the Pirate Vapes homepage.

FAQs

Do the HorizonTech Falcon Replacement Coils fit the Falcon 2 tank?

They are not a fit for the Falcon 2, which uses its own coil range. The coils are matched to the original Falcon tank and the Falcon Legend, and the model name on the tank shows which family it belongs to.

How many coils are in a pack of Falcon replacement coils?

Each pack holds three coils of one type. The type is chosen from the five listed, M1, M2, M1+, M6 and M8, and only one type is supplied in each pack.

What is the difference between the Falcon M1 coils and the M2 coils?

The M1 is rated at 0.15ohm and the M2 at 0.16ohm, and both are mesh coils for direct-to-lung vaping. Each type has its own recommended power range, so the mod setting follows the type that is fitted.

Which e-liquid suits the HorizonTech Falcon Replacement Coils?

High-VG e-liquid is recommended for all five types. These are sub-ohm coils, so the wick is fed best by a thicker liquid than the thin blends used in pod kits.

When should the Falcon tank coils be replaced?

A coil is due for replacement once the flavour fades, the taste turns burnt or the tank starts to gurgle. Use varies with wattage and e-liquid, so no fixed lifespan applies.

Can the Horizon Falcon coils be used for mouth-to-lung vaping?

They are built for a direct-to-lung draw. Ratings of 0.15ohm and 0.16ohm are well into sub-ohm territory, which sits well below the resistance used for mouth-to-lung vaping.