Innokin Endura M18 Pod Kit

Innokin Endura M18 Pod Kit

The Innokin Endura M18 takes the Endura T18's cigarette-tight MTL reputation and rebuilds it as a pod system. A 700mAh battery drives a fixed 10W output with a 13.5W boost mode on tap, feeding a 2ml side-fill pod through a swappable 1.6 ohm BVC coil. Reverse the pod 180 degrees and the draw flips from open to tight, no dial required.

Sits in the Refillable Pod Kits lineup as a proper ex-smoker's kit rather than a cloud chaser, charges over USB-C, and takes the wider T18E coil range for anyone already invested in Innokin gear.

Why vapers choose this:

• Reversible pod for two draw styles. Insert the pod one way for an open MTL, flip it 180 degrees for a much tighter cigarette-style pull. No airflow ring, no fiddling, no wear points.

• Two modes without complication. Standard 10W for smooth all-day vaping, or switch to the 13.5W boost mode when you want warmer vapour and fuller flavour.

• T18E coil compatibility on top of the included 1.6 ohm BVC, giving owners of older Innokin kits an easy path in with coils they may already have.

• Sensor-activated draw firing. Inhale to vape with no manual firing button required.

• Compact and pocket-friendly at 86.5 x 30.2 x 17mm, no drip tip protruding, sits flat in a shirt pocket.

Innokin Endura M18 Features

Reversible Pod Airflow

The M18's cleverest trick is the pod itself. Look at the base, and you will see three lines marked on one side. Insert the pod with those lines facing the LED for a more open MTL draw, or flip it 180 degrees so the lines face away for a tighter cigarette-style draw. No dial to lose or clog. Two draw styles from a single component. Simple, reliable, and effective.

10W and 13.5W Boost Mode

The M18 fires at a smooth 10W by default, which suits most 50/50 salt liquids and delivers steady flavour without cooking the coil. Hit boost mode at 13.5W, and the output goes up for a warmer, richer pull. It is useful with menthol and tobacco profiles where a bit more heat brings the top notes forward, or when the battery is running low and you want a stronger hit before charging. Not a huge jump, but noticeable.

1.6Ω BVC Coil Compatibility

The 1.6 ohm BVC is Innokin's improved take on the coil style that has been in the Endura range for years. The wick sits directly under the juice channel, which means fewer dry hits and steadier flavour across the coil's life. Because the M18 also accepts the older T18E coil, anyone upgrading from an Endura T18 pen kit can keep using existing coil stock. Coil swaps take about ten seconds: twist the base of the pod, pull the old coil out, push a new one in.

Type-C Fast Charging 

The 700mAh cell charges at 0.8A over USB-C, which puts a full charge at roughly an hour. LED indicators on the device show remaining battery in clear bands so you know if you are set for the afternoon or need to plug in soon. USB-C means the same cable your phone uses, which is one fewer thing to carry.

Puff Activation and 3-Click Power

Three clicks of the power button turn the device on; three clicks power it off. That stops it from firing in a bag or pocket without needing a separate lock function. Once powered on, the M18 is puff-activated by default. Just draw on the mouthpiece to vape. The button is dedicated to power on/off and cycling wattage modes. Simple to use for anyone stepping off disposables or a closed pod system without a manual to read first. Works nicely with any 10 or 20mg Nic Salts or 50/50 shortfill.

Innokin Endura M18 Colours

Four colours currently in stock. All share the same slim rectangular body and rounded top, with the finish applied to the metal casing.

#buttons

• Midnight Green
• Purple
• Rose Gold
• Silver

How to Set Up the Innokin Endura M18

Straightforward from box to first draw. Around three minutes.

1. Pull the pod off the top of the device and remove the coil plug from underneath.

2. Drop five to six drops of e-liquid directly onto the exposed cotton around the coil.

3. Push the 1.6 ohm BVC coil into the base of the pod until it clicks flat. No screwing.

4. Fill the pod through the silicone stopper on the side with your chosen 10 or 20mg salt or a 50/50 shortfill.

5. Leave the filled pod upright on a flat surface for around ten minutes so the wick fully saturates before firing.

6. Click the pod back onto the device. Click the fire button three times to power on, then simply draw on the mouthpiece to vape.

What is in the Innokin Endura M18 Box

The kit ships with the M18 device, one 2ml refillable pod, two 1.6 ohm BVC coils (one pre-installed, one spare), a USB-C charging cable, and the user manual.

Spare coils and additional pods are sold separately, and there is no e-liquid included in the box, so pair the kit with a bottle of your preferred 10ml E-Liquid to get going. No plug adapter is included either.

The MTL Pod Kit for the Full Endura Coil Family

The M18 uses the 1.6 ohm BVC coil as its default and accepts the T18E coil for owners of the older Endura T18 pen or anyone who already has T18E coils in a drawer. The wider Endura family stretches back years, and coil supply is stable through most decent UK vape retailers.

Not compatible with T18 II tank coils, Zenith coils, Zlide coils, or any Kroma-series coils, so keep it to the T18E and BVC range. Best paired with 50/50 nic salt and higher-PG 50/50 shortfills. High-VG 70/30 liquids will wick too slowly through the 1.6 ohm coil and cause dry hits, so avoid those from the 50/50 E-Liquids range instead.

About the Innokin Endura Series

Innokin have been building MTL kits since 2011, and the Endura line is their longest-running range. The T18 pen kit put the brand on the map with UK ex-smokers, and the range has grown to include the T22, T20S, and now the M18 as its pod-format entry.

What ties the range together is a focus on cigarette-tight draws, forgiving coils, and pricing that stays reasonable. Innokin also runs its own factory and QC operation rather than outsourcing, which is one reason coils across the family have a reputation for consistency batch to batch.

Stock Up and Save

The pre-installed 1.6 ohm BVC coil will run a fortnight to a month depending on how heavily you vape and what liquid you are running through it. Sweet dessert profiles wear coils faster than fruit and menthol. Keep a spare pack of BVC or T18E coils ready so a dry night never becomes a lost session.

Add a couple of bottles of 20mg salt from the 20mg Nic Salts shelf, and the delivery threshold sorts itself out. Pirate Vapes ships every order age-verified, dispatches same day on orders before 4 pm, and delivery is free with Free Pirate Post over £40. TPD compliant. Over 18s only.

Conclusion

The Innokin Endura M18 is a proper MTL pod kit built on years of Endura know-how. Reversible pod for two draw styles, 10W standard with a 13.5W boost, T18E coil compatibility, USB-C charging, and a body small enough to forget about in a pocket. For anyone stepping off disposables or moving up from a closed pod system, the M18 is one of the more forgiving refillable kits on the UK shelf.

Grab one at Pirate Vapes with a couple of Replacement Pods and a bottle of salt to get set up in one order. Runs neatly alongside anything in the wider MTL Vape Kits range.

FAQs

Is the Endura M18 good for a first refillable kit?

Yes. Draw activation, no wattage adjustment to worry about, and a straightforward side fill. Ex-smokers moving off disposables will find the 1.6 ohm coil at the tighter pod orientation feels closest to a cigarette pull.

How long does the battery last?

The 700mAh cell typically covers most of a working day at 10W for average users. Heavy vapers may want an afternoon top-up. Full recharge takes around an hour on USB-C at 0.8A.

What e-liquid should I use?

Any 50/50 nic salt at 10mg or 20mg, or a 50/50 shortfill. Avoid high-VG 70/30 liquids, as they will not wick properly through the 1.6 ohm coil and will cause dry hits.

How do I switch to boost mode?

Turn the device off (3 clicks), then press and hold the power button to switch between 10W Standard (green LED) and 13.5W Boost (purple LED). Click 3 times to turn it back on.

Which coils fit the M18 pod?

The 1.6 ohm BVC coil that ships in the box, plus the older T18E coil range. Coils from the T18 II tank, Zenith, Zlide, or Kroma series will not fit.

How do I clean the pod?

Empty any remaining e-liquid, rinse the pod under warm water without the coil fitted, and let it air dry fully before refitting a new coil and refilling. Never wash the device itself.