Innokin EZ.Watt Vape Starter Kit

Innokin EZ.Watt Vape Starter Kit

Most starter kits lock you to one fixed power level. The Innokin EZ.Watt gives you three, without a single menu to learn. It pairs a 1500mAh box-style mod running 13W to 35W with the 2ml Prism T20-S top-fill tank, and a bright tri-colour LED tells you which of the three power levels you are on at a glance.

Two Prism-S coils come in the box, a 0.8ohm fitted and a 1.5ohm spare, so you can set it tight for a cigarette-style draw or a touch fuller from day one. A dependable, refillable MTL Vape Kit and one of the more forgiving Vape Starter Kits for anyone stepping up from a disposable.

Why vapers choose this:

• Three power levels, no screen. Pick low, medium or high by the LED colour. No menus, no half-watt fiddling.

• Two coils in the box. A 0.8ohm fitted and a 1.5ohm spare, for two different draws out of the same kit.

• Proper top-fill tank. The 2ml Prism T20-S fills from the top and delivers a smooth, fixed MTL draw.

• All-day 1500mAh battery. Comfortably clears a day of MTL vaping for most people.

• Refillable and reusable. A coil-and-juice setup that costs a fraction of a disposable habit over time.

Innokin EZ.Watt Vape Starter Kit Features

Three Preset Power Levels

The EZ.Watt has no screen, and that is the point. You cycle through three preset power bands using the select button, and a tri-colour LED shows which one you are on. Green (Low) sits at 13W-14W and is designed for the 1.5ohm coil.

Blue (Medium) sits at 16W-18W and is built for the 0.8ohm coil. White (High) climbs to 30W-35W. Crucial note: The White setting is strictly for attaching separate sub-ohm tanks; using it with the included T20-S tank will instantly burn your coil.

0.8Ω and 1.5Ω Prism-S Coils

The kit ships with two Prism-S coils. The 0.8ohm comes fitted for a slightly fuller MTL to RDTL draw, and a 1.5ohm spare gives a tighter, cigarette-style pull that many ex-smokers prefer.

Swapping between them changes the whole character of the vape, and the tank supports the wider Prism-S range when you want to try others. Keep a pack of Replacement Coils in, and you are never off the road.

2ml Top-Fill T20-S Tank

The 2ml Prism T20-S tank unscrews at the top cap, so you refill without taking anything off the mod. It features a fixed dual-hole airflow tuned specifically for a smooth MTL draw.
Both the 0.8ohm and 1.5ohm coils have small wicking ports, so you must stick to 50/50 e-liquids or nic salts. Thick high-VG liquids will not wick fast enough and will cause dry hits. A bottle from our 50/50 e-liquid range is the easy starting point.

1500mAh Battery With Micro-USB

1500mAh is plenty for a full day of MTL vaping for most people, more if you stick to the lower bands. When it runs down, it tops up over micro-USB, and while that is an older port than USB-C, the cable is in the box. Need a spare? Keep a Micro-USB Charging Cable with your kit.

Simple Two-Button Controls

Two buttons, a fire and a select, handle everything. There are no modes to scroll, no settings to misconfigure, and built-in short-circuit and low-voltage protections keep it safe while you learn. It is the kind of kit you can hand to someone on their first day, and they will have it going in minutes.

Innokin EZ.Watt Vape Starter Kit Colours

Six finishes in the picker, from plain and pocketable to a two-tone look. Each covers the same compact mod.

#buttons

• Black
• Blue
• Grey
• Purple
• Red
• Red/Black

How to Set Up the Innokin EZ.Watt Vape Starter Kit

A few minutes and you are vaping.

1. Charge over micro-USB. Top up the 1500mAh battery fully with the supplied cable before your first vape.

2. Prime the coil. Before you fit a fresh Prism-S coil, put two or three drops of juice straight onto the exposed cotton so it is not going in dry.

3. Fill the tank. Unscrew the top cap of the Prism T20-S, add your juice to the 2ml line and avoid the central tube, then close it.

4. Let it stand. Leave the filled tank upright for a good ten minutes so the cotton fully saturates. Firing a dry coil scorches it, and that taste does not come back out.

5. Set your power. Click the select button to choose the correct power band for your coil (Green for the 1.5ohm, Blue for the 0.8ohm). Do not use the White setting with this tank.

6. Fire and draw. Hold the fire button and inhale. Begin with gentle pulls and build up.

What's in the Innokin EZ.Watt Vape Starter Kit Box

You get:

• The EZ.Watt mod with its 1500mAh battery,

• The Prism T20-S 2ml tank with a 0.8ohm coil fitted,

• A spare 1.5ohm Prism-S coil,

• A spare drip tip,

• A micro-USB charging cable

• And a user manual.

No e-liquid is included, so add a bottle to suit your coil from Pirate Vapes when you order.

About the Innokin EZ.Watt

Innokin built its reputation on dependable beginner MTL gear, from the Endura T18 and T20 to the Zenith and Zlide- a kit that just works and keeps working.

The EZ.Watt fits that mould and adds a light touch of control: three power bands and two coils, wrapped in a screenless box mod that a first-time vaper can pick up without a manual. 

It is old-school in the best sense, a simple, sturdy device aimed at people who want reliability over gimmicks.

Stock Up and Save

Being coil-based, the EZ.Watt is cheapest to run when you keep spares in. A pack of Prism-S coils and a bottle or two of the right juice will keep it going for weeks, and against a weekly disposable spend it pays for itself quickly. Grab a few bits through our Plunder Packs Multi-Buy Deals to bring the price down further.

Every order from Pirate Vapes ships same day before 4 pm, age-verified, over-18s only, with TPD-compliant stock throughout. Spend over £40 and delivery is free with Free Pirate Post.

Conclusion

The Innokin EZ.Watt is a refillable starter kit that keeps things simple without leaving you stuck: three power levels on a tri-colour LED, a 2ml top-fill Prism T20-S tank, two coils in the box, and a 1500mAh battery that clears the day.

There is nothing to configure; it is built to last, and it costs a fraction of a disposable habit to run. If you want a first mod that just works, it is a safe bet. Browse more Innokin Vape and Vape Accessories at Pirate Vapes.

FAQs

Is the EZ.Watt good for beginners?

Yes. It is built for it: two-button operation, three preset power levels shown on an LED, and everything you need in the box. There are no menus to learn.

What coils does the EZ.Watt use?

Innokin Prism-S coils for the Prism T20-S tank. It ships with a 0.8ohm fitted and a 1.5ohm spare, and the tank supports the wider Prism-S range.

How is the EZ.Watt charged?

Over a micro-USB port at 5V/1A, using the cable in the box. It is an older port than USB-C, so hang on to the cable.

What e-liquid should I use with the EZ.Watt?

Stick to 50/50 blends or nic salts for both coils. High-VG liquids are too thick for the Prism-S coils and will quickly burn the cotton.

What do the three power settings in the EZ.Watt do?

They set the wattage band: Green (13-14W), Blue (16-18W), and White (30-35W). Match the Green setting to your 1.5ohm coil, and the Blue setting to your 0.8ohm coil. The White setting is too powerful for these coils and should only be used if you screw a separate sub-ohm tank onto the battery.

Is the EZ.Watt refillable, and is it affected by the disposables ban?

It is a refillable tank kit with a rechargeable battery, so it is not caught by the June 2025 single-use ban. You refill the 2ml tank and replace the coil as needed.