Innokin Klypse Mecha Pod Kit

Innokin Klypse Mecha Pod Kit

A pod kit that looks like the inside of a wristwatch. The Innokin Klypse Mecha wraps a 900mAh battery and a 6-18W adjustable output in a zinc-alloy body, complete with an exposed cog motif and a circular OLED screen that even tells the time.

It is a refillable 2ml MTL setup that reads whichever Klypse pod you fit and caps the power to keep the coil safe. Two pods come in the box, and it takes the whole Klypse family, refillable and prefilled alike. Have a browse through the Refillable Pod Kits range while you are here.

Why vapers choose this:

• A design that stands out on a shelf. The exposed watch-cog look and circular OLED make it read like nothing else at the price, and the Innokin 2.0 screen shows wattage, puff time, battery level, and the clock.

• It picks a safe power for every pod. Fit a pod, the Mecha reads it, and the wattage stays inside that coil's window.

• One device, the whole Klypse family. Refillable 0.6ohm, 0.8ohm, and 1.2ohm pods, plus the 1.7ohm prefilled C1.

• Proper 2ml side-fill pods. Quick to top up, slow to leak.

• Adjustable airflow. Tight MTL or a slightly looser draw, your call.

Innokin Klypse Mecha Features

The Watch That Happens to Vape

The whole thing is styled on mechanical watch internals, right down to the cog-shaped firing motif behind a clear panel. The circular OLED runs Innokin's 2.0 interface, so at a glance you get your wattage, remaining battery, puff time, and yes, the actual time of day. It is a genuine talking point, not just a gimmick.

How Does the Smart Power Keep You Right?

Each Klypse pod carries its own resistance, and the Mecha adjusts to match. The 0.6ohm reaches the full 18W, the 0.8ohm tops out around 14W, the 1.2ohm caps near 11W, and the prefilled 1.7ohm sits lower still. You physically cannot push a coil past what it was built for, which is reassuring.

Two Draws Straight Out of the Box

The included 0.6ohm pod gives a warmer, slightly looser restricted draw at higher power. The 1.2ohm tightens it right up for a classic MTL pull. Both handle 50/50 and lower-strength salts nicely, so pair them with the right Nic Salts, and you have covered two vaping styles with one device.

Fill It From the Side, Top Up in Seconds

The 2ml PCTG pods use a side-fill port and click onto the base magnetically, so there is no fiddly threading. Fair warning: the fill port is on the snug side, so a fine-tip bottle helps. Once it is in, the seal holds well, and leaks are rare. Grab spare Replacement Pods and swapping is instant.

900mAh and USB-C, With One Small Caveat

The 900mAh cell comfortably sees most MTL vapers through a day. Charging is over USB-C, which is the right port, though at 800mA it tops up at a steady pace rather than a rapid one. Not a dealbreaker for an overnight charge, just worth knowing if you like a quick midday boost.

Innokin Klypse Mecha Colours

Six finishes in the range, and they lean more jewellery than gadget. The names give you the gist, but check the product photos for the exact look before you commit.

#buttons

• Crimson Red
• Gold Glow
• Moonshadow Ink
• Rainbow Fusion
• Sapphire Blue
• Stardust Silver

How to Set Up the Innokin Klypse Mecha

Refillable pods, so the first job is filling one.

1. Pull the pod off the magnetic base and open the side-fill port.

2. Tilt in your 50/50 e-liquid or nic salt, filling to just below the max line, then close the port firmly. Browse 50/50 E-Liquid if you need a bottle.

3. Click the pod back onto the magnets. It seats one way, so it is hard to get wrong.

4. Stand it upright and give the coil three to four minutes to wick through before your first pull, so the cotton is fully wet.

5. Set the airflow with the side slider and dial the wattage to suit the pod.

6. Draw to fire. No button press needed. Start gentle and adjust to taste.

What's in the Innokin Klypse Mecha Box

You get:

• the Klypse Mecha mod,

• a 0.6ohm RDL pod already fitted,

• a spare 1.2ohm MTL pod,

• a USB-C charging cable,

• and the quick start guide.

No e-liquid is included, so add a bottle to your order to get going.

Works With the Entire Klypse Pod Family

This is the real draw of buying into Klypse: one device, every pod. The Mecha takes the refillable 0.6ohm, 0.8ohm, and 1.2ohm pods, and the prefilled 1.7ohm Klypse C1 when you want grab-and-go convenience. All of them connect magnetically and get auto-detected, so there is nothing to reconfigure. Keeping a rotation of pods topped up is simple once you settle on your favourites.

What it will not take is another brand's pods. This is a closed Klypse system, so stick to Klypse cartridges. If you are still comparing devices, the wider MTL Vape Kits range is worth a look.

About Innokin

The Klypse line is Innokin's compact, closed-pod family, and the Mecha is its most characterful entry. Where most pod systems chase a slim slab shape, the Mecha borrows from watchmaking to give the category some personality. Behind the styling sits Innokin's 2.0 user interface and the smart wattage control that runs across the range, both aimed at making an adjustable device feel simple.

Innokin has spent years building a reputation on beginner-friendly MTL hardware, and the Klypse Mecha is that know-how wrapped in a genuinely distinctive shell.

Stock Up and Save

Pods are the part you reorder, so it pays to keep a couple of spares in the drawer before the flavour starts to dip. Setting your favourite pods on The Crow's Nest means fresh ones arrive without you lifting a finger.

Pirate Vapes dispatches every order the same day before 4 pm, packed to survive the post. All stock is TPD compliant, checkout is age-verified, and it is over 18s only.

Conclusion

The Innokin Klypse Mecha is one of the few pod kits with real personality, and it backs the looks up with sensible engineering: smart per-pod power, adjustable airflow, and compatibility with the entire Klypse range. Two pods in the box cover both a tight MTL draw and a warmer one, so most vapers are sorted from day one.

If you want a closed-pod device that does not look like everything else on the shelf, it is an easy recommendation. Explore the full Innokin Range and matching Vape Accessories at Pirate Vapes.

FAQs

What pods does the Mecha use?

The full Klypse range: refillable 0.6ohm, 0.8ohm, and 1.2ohm pods, plus the 1.7ohm prefilled C1. They all click on magnetically.

Is the Mecha refillable or prefilled?

Both. The two pods in the box are refillable, but the Mecha also runs the prefilled Klypse C1 if you fancy the convenience.

What wattage does the Mecha run?

6-18W, with the ceiling set by the pod. The 0.6ohm reaches 18W, the 1.2ohm caps around 11W, and the device picks the safe range for you.

Is the Mecha MTL or DTL?

Mostly MTL. The 0.6ohm pod with the airflow open gives a warmer, restricted draw, but this is not a big-cloud device.

How do I fill the Mecha pods?

Side-fill. Open the port on the side of the pod, add your liquid, close it. A fine-tip bottle makes it easier.

How long does the Mecha battery last?

The 900mAh cell gets most MTL vapers through a day. USB-C charges it back up, though at 800mA it is steady rather than rapid.