Innokin Klypse Plus Vape Pod Kit

Innokin's Klypse range has picked up awards for a reason. The original was one of the most popular MTL Pod Kits in the UK, and the Klypse Plus builds on that foundation with a bigger battery, faster charging, and full backward compatibility with every Klypse pod ever made.

You get an 1800mAh cell, constant output that does not fade as the battery drains, a magnetic dust cap that snaps to the base of the device when you are vaping, and eight colour options. It runs between 12W and 22W depending on which pod you insert, with no buttons and no menus. Just fill, slot in, and inhale. If you already own Klypse pods from a previous kit, they work here too. Pirate Vapes carries it alongside our wider Refillable Pod Kit Range.

Why Vapers Choose the Innokin Klypse Plus

Battery That Runs All Day and Charges Fast

1800mAh gets most MTL vapers through a full day without thinking about a charger. When you do need to top up, 2A USB-C fast charging pushes the battery to 80% in about half an hour. A full charge takes roughly an hour. That is fast enough to plug in while you eat dinner and have it ready before you finish.

Constant Output, No Power Fade

This is a feature you do not see on every pod kit. The Klypse Plus delivers the same wattage to the coil whether the battery is at 95% or 8%. Your seventh puff of the day tastes identical to your seventieth. On cheaper pod kits, there is a noticeable dip in warmth and flavour once the battery drops below 40%. That does not happen here.

The Dust Cap That Actually Works

A small thing, but a clever one. The magnetic cap covers the mouthpiece when you are not using the device, keeping pocket lint and bag debris out. When you pop it off to vape, it clicks magnetically onto the base of the kit so you do not lose it. It sounds minor until you have experienced pulling a mouthpiece out of your pocket with fluff stuck to it.

Three Coil Options for Three Different Draws

The 1.2Ω pod fires at 12W and produces a very tight, cigarette-style pull. Minimal vapour, focused flavour. The 0.8Ω pod at 16W loosens the draw slightly and adds a bit more warmth. The 0.6Ω at 22W opens things up into RDL territory with noticeably more vapour. All three use mesh heating elements built directly into the pod.

Works With Every Klypse Pod Ever Made

If you already own an Innokin Klypse or Klypse Zip, your existing pods slot straight into the Klypse Plus. Both the original Klypse pods and the newer V2 pods are fully compatible. That means no wasted stock and no need to rebuy consumables when you upgrade.

Innokin Klypse Plus Colours

Eight finishes, all built on the same aluminium alloy and PCTG shell. The colour range is wider than most pod kits at this price, and each one carries the same brushed metallic texture.

#buttons

• Midnight Black
• Crystal Silver
• Ruby Red
• Lime Green
• Mocha Gray
• Pearl White
• Space Gray
• Violet Indigo

Stock varies by colour. Check this page for current availability.

Perfect Compatibility for the Innokin Klypse Plus

The Klypse Plus runs on Innokin's Klypse pod system, and that includes both the original Klypse pods and the updated V2 versions. The coils are built into the pods themselves, so there are no separate coil heads to buy or swap. When a pod loses flavour, you replace the whole unit.

Three resistance options cover the range:

The 1.2Ω pod fires at 12W. Designed for a firm MTL draw with low liquid consumption. Best paired with higher-strength nic salts (10mg or 20mg) in a 50/50 blend.

The 0.8Ω pod fires at 16W. A slightly warmer MTL pull with a touch more vapour. The one that ships in the box, and the one most UK vapers settle on as their daily driver.

The 0.6Ω pod fires at 22W. Opens the draw into restricted lung territory. More vapour, more warmth, slightly higher liquid consumption. Works well with 10mg nic salts or 3mg freebase if you prefer a lighter hit.

Browse Innokin Klypse Replacement Pods in our pods and refills section. You can also explore the wider Innokin Collection or pair the kit with something from our 10ml nic salt e-liquid range.

Innokin Klypse Plus Features

Smart Mode Wattage Control

No manual adjustment, no complicated menus or screens, no learning curve. The Klypse Plus reads the resistance of whatever pod you insert and locks the output to the optimal wattage for that coil. Plug in the 0.8Ω pod, and it sets itself to 16W. Swap to the 0.6Ω, and it bumps up to 22W. You never touch a setting.

Aluminium Alloy Body

The outer shell is machined aluminium with a PCTG (food-grade plastic) section. It feels solid without being heavy at 66g. The metallic finish resists light scratches better than the polycarbonate housing you find on most sub-£15 pod kits, and it gives the kit a weight that feels deliberate rather than cheap.

Side-Fill Pod Design

Each Klypse pod refills through a silicone stopper on the side. Peel it back, insert your bottle nozzle, fill to the line, press it shut. The fill port is wide enough for most standard e-liquid bottle tips without needing to squeeze liquid in at an awkward angle. Top up takes about ten seconds.

Mesh Heating Elements

Both the original and V2 Klypse pods use mesh coils rather than standard round wire. Mesh distributes heat across a broader surface area, which translates to more even liquid vaporisation and fewer dead spots. In practical terms, you get cleaner flavour and longer pod life before the taste starts to dull.

LED Battery Indicator

A small LED on the front of the device displays your battery level each time you take a draw. It gives you enough warning to plan a charge rather than getting caught with a dead kit mid-afternoon.

How to Set Up the Innokin Klypse Plus

1. Unbox the device, pod, dust cap, and USB-C cable.

2. Charge the Klypse Plus fully before first use. With 2A USB-C, this takes about an hour.

3. Prime the pod by dropping a small amount of e-liquid onto the cotton visible inside the pod. This step prevents a burnt first puff and is worth the thirty seconds it takes.

4. Open the side-fill silicone stopper on the pod and fill with your chosen e-liquid. Stick to 50/50 VG/PG E-Liquids blends for best results. Do not overfill.

5. Press the stopper firmly shut.

6. Slot the pod into the top of the device. The magnets will pull it into position.

7. Wait 5 to 10 minutes for the wicking material to saturate fully.

8. Attach the dust cap if you want to keep the mouthpiece covered, or leave it off.

9. Adjust the airflow slider on the side of the device to your preferred draw tightness.

10. Inhale through the mouthpiece. The device fires automatically.

Conclusion

The Klypse Plus sits in a sweet spot for vapers who want something small enough to carry everywhere, reliable enough to last a full day, and simple enough to require zero setup knowledge. It is a strong recommendation for anyone stepping away from disposables or prefilled pods and looking to cut costs with refillable 10ml bottles.

The constant output technology also makes it a solid upgrade for current Klypse owners who want the same pod compatibility in a bigger-battery chassis. Pirate Vapes stocks the Klypse Plus as part of our Innokin Collection, with Free Pirate Vapes on orders over £40 and same-day dispatch before 4pm. All products are MHRA-notified, TPD compliant, and sold through age-verified checkout. Over 18s only.

FAQs

What pod comes included with the Innokin Klypse Plus?

The box contains one Klypse V2 pod in 0.8Ω resistance. This is the mid-range option suited to MTL vaping at 16W. The 0.6Ω and 1.2Ω pods are sold separately in three-packs.

How long does the Klypse Plus battery last on a single charge?

The 1800mAh battery comfortably lasts a full day for most MTL vapers. Lighter users may stretch it into a second day. Heavier RDL use with the 0.6Ω pod will drain it faster, but a full day is still realistic.

Can I use my old Klypse pods in the Klypse Plus?

Yes. The Klypse Plus is fully backward compatible with both the original Klypse pods and the newer V2 versions. If you already have spare pods from a previous Klypse or Klypse Zip, they will work without any issues.

What e-liquid should I use?

Innokin recommends 50/50 VG/PG e-liquids. Nic salts in 10mg or 20mg are a natural fit for the 0.8Ω and 1.2Ω pods. Thicker high-VG liquids are not recommended, as they can clog the wicking and shorten pod life. Browse our 10ml nic salt range for compatible options.

Does the Klypse Plus have variable wattage?

Not manually. Smart Mode reads the resistance of the installed pod and sets the wattage automatically. The 1.2Ω pod runs at 12W, the 0.8Ω at 16W, and the 0.6Ω at 22W. You cannot override these settings, and you do not need to.

How do I know when to replace the pod?

When flavour starts to taste muted, slightly burnt, or different from what you are used to, the mesh coil inside the pod is reaching the end of its life. Most users get one to two weeks per pod depending on how often they vape and what liquid they use.

Is the dust cap necessary?

Not strictly. The kit works fine without it. But it keeps the mouthpiece clean when the device is in a pocket or bag, and the magnet on the base of the kit holds it securely while you vape so it does not get lost. It is a small convenience feature that most users end up appreciating.

Is the Klypse Plus TPD compliant for UK sale?

Yes. The pod capacity is 2ml in line with UK regulations. Nicotine-containing e-liquids must be 10ml maximum volume and 20mg/ml maximum strength. All Klypse Plus stock sold by Pirate Vapes is MHRA-notified.