Innokin Kroma Nova Replacement Pods

Innokin Kroma Nova Replacement Pods

When the pod on your Kroma Nova starts to leak, cloud over, or lose its seal, this is the part that puts it right. The Innokin Kroma Nova Replacement Pod is the empty, refillable cartridge built for the Kroma Nova kit, with a 2ml TPD capacity, a sliding top-fill port, and a clear PCTG body so you can see your liquid level at a glance.

It takes the Innokin PZP coil range, which means one pod covers MTL, RDL, and DTL depending on the coil you drop in. Sold as a single pod and stocked alongside the rest of the Replacement Pods at Pirate Vapes.

Why vapers choose this:

• A direct fit for the Kroma Nova, so there is no adapter, no workaround, and no guessing whether it will seat properly. It drops in, the magnets catch, and you are back vaping.

• 2ml capacity keeps the pod within UK limits while still holding enough for a decent stint between refills.

• Top-fill through a sliding port means no unscrewing and no dripping down the side.

• PCTG rather than glass. It shrugs off the knocks that crack other pods.

• One pod, three draw styles. Fit an MTL PZP coil for a tight cigarette-style pull, or a lower-resistance one for RDL and DTL clouds.

Innokin Kroma Nova Replacement Pod Features

Made For The Kroma Nova

Pods wear out before the device does. The seals soften, the plastic hazes, and flavour muddies. Rather than replacing the whole kit, you replace the pod. This one is the matched part for the Kroma Nova, so the magnetic connection holds firm and the airflow lines up the way Innokin intended.

Easy Top-Fill Design

Because it is the difference between a ten-second refill and a mess. Slide the top back, tip your liquid into the exposed port, slide it closed. No detaching the pod, no inverting it, no liquid running onto your fingers. If you have ever refilled a bottom-fill pod in a hurry, you already know why this is the better way round.

Durable PCTG Pod

The body is moulded from PCTG, a tough transparent plastic. It gives you the same clear view of your liquid level that glass would, without the fragility. Drop a glass pod on a tiled floor and you are ordering a replacement. This one tends to bounce. For a part you handle every day, that durability earns its place.

Compatible With PZP Coils

The pod is only half the picture. It runs on Innokin's PZP coil platform, a press-fit mesh range that spans several resistances for different draw styles. Pick a higher resistance for MTL, a lower one for RDL or DTL. Browse the Replacement Coils to stock up, since coils are consumable and the pod is not.

Two Mouthpieces Included

The pod ships with an MTL mouthpiece fitted and a spare RDL mouthpiece in the pack, so you can switch the feel of your draw without buying anything extra.

Combined with the adjustable airflow slider on your Kroma-Nova device and your choice of coil, that gives you real control over how tight or airy each pull feels. Spare tips live in the Drip Tips And Mouthpieces section if you want backups.

How to Fit and Fill the Kroma Nova Pod

Quick job. A couple of minutes from box to first draw.

1. Press-fit your PZP coil into the base of the pod until it clicks home. Do not force it past the seat.

2. Prime the coil by dripping three or four drops of e-liquid directly onto each wicking window until the cotton looks darkened and wet.

3. Slide open the top-fill port and add your e-liquid, keeping the nozzle to the side of the central airflow tube. Fill to just below the max line.

4. Slide the port shut and let the filled pod stand upright for at least seven minutes so the cotton saturates fully. Firing it dry will scorch the coil, and there is no coming back from that.

5. Seat the pod onto the device. The magnets pull it into place.

6. Choose your mouthpiece, set the airflow slider on the device, and start your wattage at the lower end of the coil's range before working up.

What's in the Box

One Innokin Kroma Nova replacement pod with the MTL mouthpiece already fitted, plus a spare RDL mouthpiece for switching your draw style. No coil, no e-liquid, and no device are included. You supply those separately.

Made for the Innokin Kroma Nova, and Only the Kroma Nova

This pod is specific to the Innokin Kroma Nova kit. If you own the Kroma Nova, this is the cartridge it takes, and it runs the full Innokin PZP coil range from the Innokin Range. Fit a PZP coil, and you can vape it MTL, RDL, or DTL.

What it does not fit: the Innokin Kroma Z, which uses an entirely separate coil and pod system, or any of Innokin's other pod kits. If the coil in your current pod is a PZP and the kit says Kroma Nova on it, you are in the right place. If it is anything else, it will not seat.

About Innokin

Innokin has been building vape hardware since the early days of the category and made its name on dependable mouth-to-lung gear like the Endura and Zenith lines. The Kroma Nova carries that reliability into a pod mod format, and the PZP coil platform behind it is the part that makes this pod so flexible.

One cartridge, one coil family, and a spread of draw styles from a single device. It is a practical piece of engineering rather than a flashy one, which is exactly why the Kroma Nova has held its place with MTL and RDL vapers.

Stock Up and Save

Pods and coils are the parts that wear, so it pays to keep spares in the drawer rather than getting caught short mid-week. Pairing a fresh pod with a few PZP coils covers you for a good stretch.

Every order from Pirate Vapes ships same day when placed before 4 pm, packed to survive the post. All hardware is TPD compliant, with age-verified checkout and over 18s only.

Conclusion

The Innokin Kroma Nova replacement pod is the simple fix for a tired or leaking cartridge, and the flexible base for whichever PZP coil and draw style you prefer. A 2ml top-fill design, a durable PCTG body, and two mouthpieces in the pack make it a straightforward buy for any Kroma Nova owner.

Grab a coil or two at the same time so you are never left waiting. Browse more Innokin pods, coils, and refills and pods at Pirate Vapes, and check the MTL Vape Kits collection if you are still choosing a device.

FAQs

How many Kroma Nova pods come in a pack?

One. This is a single replacement pod, which suits topping up a spare or swapping a worn one without committing to a multipack.

Do Kroma Nova pods come with a coil?

No. The pod is empty and coil-free. It runs the Innokin PZP coil range, bought separately, so you can pick the resistance and draw style you want.

What e-liquid capacity are the Kroma Nova pods?

2ml in the UK, filled through the sliding top port. Keep the fill just below the max line to avoid flooding the central airflow.

Can I vape the Kroma Nova pods MTL and DTL?

Yes. The draw depends on the PZP coil you fit and where you set the airflow slider on your device. Use a higher resistance coil with tight airflow for an MTL pull, or a lower resistance coil with wide-open airflow for RDL and DTL.

Will Kroma Nova pods fit my Kroma Z?

No. The Kroma Z uses a different pod and coil system entirely. This pod is made only for the Kroma Nova.

How long should a Kroma Nova pod last?

With regular coil changes and careful filling, a pod holds up for weeks. Replace it once the plastic hazes, the flavour dulls, or you notice any seepage around the base.