Innokin Plexus Go Vape Pen Kit

Innokin Plexus Go Vape Pen Kit

There is no fire button on the Innokin Plexus Go. You draw and it fires, which is the whole appeal for anyone stepping across from disposables. It runs a 1000mAh battery at up to 16W. The draw is tuned tight, for MTL.

The 2ml pod fills from the top through a sliding port, with the coil built into the cartridge. A side airflow slider sets how open that draw feels. The kit arrives with a 0.8ohm mesh pod fitted. Find it among the wider Refillable Pod Kits.

Why vapers choose this:

• Auto-draw firing starts the Plexus Go on inhale with no button to hold, which is the easiest format for anyone new to refillable vaping.

• Refillable 2ml pod takes your own e-liquid, so ongoing cost is juice and the odd pod rather than a fresh sealed device.

• Side airflow slider shifts the kit between a cigarette-tight MTL draw and a slightly airier restricted DTL feel.

• 16W mesh pod keeps the wattage modest and the flavour clean, which pairs naturally with higher-strength nic salts.

• Pen-shaped 1000mAh body stays pocketable while holding a full-day battery for a light-to-moderate vaper.

Innokin Plexus Go Features

1000mAh Battery with USB-C Charging

The built-in 1000mAh cell is a sensible size for a pen kit and recharges over USB-C. For a light or moderate vaper that is comfortably a day of use between charges. Keeping the output at 16W is part of why the battery lasts, since a modest wattage draws less from the cell.

Auto-Draw Activation

The Plexus Go fires on inhale in a fraction of a second, with no button and no menu. That auto-draw approach mirrors the simplicity ex-disposable users are used to, so there is nothing to learn before the first vape. Draw on the mouthpiece and the kit does the rest.

2ml Top-Slide Refillable Pod

Each Plexus pod holds 2ml, the UK maximum, and fills through a sliding top port. The pod itself is fully transparent, so your juice level stays in view and a top-up rarely catches you out. Fill it with your chosen strength from the Nic Salts Range.

Side Airflow Slider

A slider on the side of the device tightens or opens the draw. Closed down it gives a tight mouth-to-lung inhale close to a cigarette. Opened up it moves toward a restricted direct-to-lung style, so the Plexus Go pod kit can flex to how you like to vape.

Mesh Pod System

The kit runs Innokin's Plexus mesh pods, where the coil is sealed inside the cartridge. Mesh heats the liquid evenly for consistent flavour, and when a pod tires you swap the whole thing rather than fitting a separate coil. Spares live in the Replacement Pods.

Innokin Plexus Go Colours

The Plexus Go pen kit comes in five finishes, from understated metallics to brighter tones.

#buttons

• Frost Blue
• Indigo Blue
• Midnight Black
• Moonlight Silver
• Sakura Pink

How to Set Up the Innokin Plexus Go

Getting started takes a few minutes before your first vape.

1. Charge the kit over USB-C using your own cable before first use.

2. Lift out the pod, slide open the top-fill port and add your e-liquid up to the 2ml line.

3. Reseat the pod in the device until it clicks onto its connection.

4. Leave it to stand for around five minutes so the mesh coil soaks and avoids a dry first puff.

5. Set the side airflow slider tighter for MTL or more open for a restricted DTL draw.

6. Draw on the mouthpiece to fire, since there is no button to press.

What's in the Innokin Plexus Go Box

Each kit contains the basics to get going.

• 1x Innokin Plexus Go device (1000mAh)

• 1x Innokin Plexus 0.8ohm mesh pod

• 1x user manual

E-liquid is not included, and the USB-C charging cable is supplied separately rather than in the box.

Made for Refillable, Not Disposable, Vaping

The Innokin Plexus Go is a reusable kit: a rechargeable battery, a refillable 2ml pod and a replaceable mesh coil inside that pod, which is the format UK law now requires. You fill it with any suitable e-liquid rather than buying a sealed unit.

Pods for it come from the Innokin Plexus range in 0.8ohm and 1.2ohm, so refills are simple to find and swap. They are not shared with other Innokin pod systems such as the Sceptre or Endura lines, so confirm you are buying Plexus pods before ordering. Browse the wider hardware range in the Innokin Collection.

About Innokin

Innokin has spent years building a reputation around mouth-to-lung and beginner-friendly hardware, from the Endura and Zenith lines to its simpler pod pens. The Plexus platform is the brand's take on an easy refillable pen, using transparent mesh pods and auto-draw firing to strip away the learning curve.

The Plexus Go is the compact end of that platform, aimed at vapers who want a straightforward MTL device with a little airflow flexibility. It is a practical, low-fuss kit from a maker that knows the MTL market well, and Pirate Vapes lists it alongside the Plexus pods that keep it running.

Stock Up and Save

A spare Plexus pod in the drawer keeps your Plexus Go running the moment the fitted one tires. Pirate Vapes stocks the kit through an age-verified checkout, with Free Pirate Post on orders over £40.

Adding a bottle of your usual nic salt to the same order keeps the whole setup ready, and bundle pricing is worth a look in the Multi-Buy Range.

Conclusion

The Plexus Go vape pen kit keeps things simple: a 1000mAh battery, 16W auto-draw firing and a refillable 2ml mesh pod with two resistances to set the draw. A side airflow slider and the choice of 0.8ohm or 1.2ohm pods let it cover both MTL and a restricted DTL style.

Pick your finish, pair it with a suitable juice from the 10ml E-Liquids Range and shop the full range at Pirate Vapes.

FAQs

What battery does the Innokin Plexus Go have?

The Plexus Go uses a built-in 1000mAh battery charged over USB-C. For a light or moderate vaper that is around a day of use between charges, with the modest 16W output helping it last.

Which pods fit the Innokin Plexus Go pod kit?

The Plexus Go takes Innokin Plexus mesh pods in 0.8ohm and 1.2ohm, with the coil built into each pod. The kit comes with the 0.8ohm pod fitted.

Is the Plexus Go better for MTL or DTL vaping?

The Plexus Go is built mainly for MTL, with the side airflow slider adding a restricted DTL option. Fit the 1.2ohm pod and close the airflow for a tight draw, or use the 0.8ohm pod with more open airflow for an airier one.

How do I refill the Innokin Plexus Go pod?

Slide open the top-fill port and add your e-liquid up to the 2ml mark, then close it. The transparent pod fills from the top, so you can see the level as you go.

Does the Innokin Plexus Go come with e-liquid or a charging cable?

E-liquid is not included, and the USB-C cable is supplied separately rather than in the box. The kit ships with the device, a 0.8ohm pod and a manual, so add your own juice and a cable to get started.

How often do the Plexus Go pods need replacing?

Replace a Plexus pod when the flavour dulls or vapour drops off, usually after a week or two of regular use. Since the mesh coil is built in, a fresh pod restores clean flavour in a single swap.