King of Pod Slim Pro XL Replacement Pods

King of Pod Slim Pro XL Replacement Pods

Three empty pods, three mesh resistances, one job: keep an OXVA Xlim fed without paying OEM pod prices every time. The King of Pod Slim Pro XL Replacement Pods are refillable Replacement Pods built to fit the full OXVA Xlim range.

Each pod holds 2ml under UK rules, runs an integrated mesh coil, and fills from the top in seconds. Choose your resistance from 0.4Ω, 0.6Ω or 0.8Ω, add the juice you like, click it in and go. Three to a pack, so you are covered for weeks.

Why vapers choose this:

• Fits the whole OXVA Xlim range. One pod format covers the standard Xlim, the Xlim Pro, the SE, the SQ and the Go, so you are not hunting for a device-specific cartridge every time you reorder.

• Three mesh resistances set the draw from tight MTL to open RDL without swapping kit.

• Top-fill in seconds through the port, no need to pull the pod apart.

• Mesh coil built in for cleaner flavour and faster ramp-up, right down to the last few draws.

• Three to a pack keeps a spare or two ready, which is exactly what a daily driver needs.

Slim Pro XL Pod Features

One Pod, Three Resistances

The picker runs 0.4Ω, 0.6Ω and 0.8Ω, all mesh. The 0.8Ω gives a tight MTL draw close to a cigarette. The 0.4Ω opens right up for a warmer RDL hit with more vapour. The 0.6Ω sits between the two. One pod shell, three genuinely different vapes.

Mesh Beats Old Wire Coils

Every pod carries an integrated mesh coil rather than a round wire element. Mesh spreads heat across a wider surface, so it ramps up quicker and pulls flavour more evenly from the first fill. Wicking stays steady too. When the taste finally dulls, you drop in a fresh pod.

Top-Fill, No Faff

Refilling is a top job. Lift the stopper, tip your e-liquid into the port, close it and carry on. No pulling the pod off the device, no mess running down the side. Honestly, once you have used a top-fill pod, going back feels like a chore. Spare OXVA pods sit alongside these if you want options.

Snaps In, Stays Put!

The pod holds to the device on a magnetic connection, so it clicks in and sits firm with no threading to line up. The leak-resistant build keeps liquid away from the airflow path and the battery contacts. Pull one out, push a new one in, done in seconds.

Fill It Your Way

These arrive empty, which is the whole point. You pick the flavour and the strength, not a factory. Run nic salts at MTL strengths in the 0.8Ω, or a higher-VG freebase in the 0.4Ω for bigger clouds. Your kit, your juice, your call.

Slim Pro XL Pod Resistance Options

Three resistances share the pack, all mesh, and they cover very different vaping styles. Here is how to pick.

#buttons

• 0.4 Ohm 
• 0.6 Ohm
• 0.8 Ohm

How to Set Up the Slim Pro XL Pods

Under a minute once you have done it once.

1. Pull the used pod straight up out of the device. The magnets release with a firm tug.

2. Take a fresh pod and peel off the silicone plug covering the base.

3. Open the top-fill port, then fill with 50/50 e-liquid (or your chosen ratio) to just below the max line. Grab a bottle from the 50/50 E-Liquid range if you are out.

4. Close the port firmly and wipe any stray liquid off the outside.

5. Click the pod into the device and let it stand upright for a full five minutes so the mesh wicks through before your first draw.

6. Start at the lower end of that resistance's wattage window and build up until the draw feels right.

What's in the Slim Pro XL Pod Box

Three empty King of Pod refillable pods in the resistance you picked, each sealed with its plug in place. That is everything in the pack. No e-liquid, no device, no charger. If you have not got a compatible kit yet, you will need one from the OXVA Xlim range before these are any use. Every pack from Pirate Vapes ships sealed and ready to fill.

Made for the OXVA Xlim Range

These pods are cut to the OXVA Xlim pod format, so they fit right across the range. The standard Xlim takes them. So does the Xlim Pro. The Xlim SE and SQ as well, along with the Xlim Go. (Note: They do not fit the OXVA Xlim C, which uses a different coil system).

One thing worth knowing: the 0.4Ω wants a higher-powered kit like the Xlim Pro to run properly. On older or lower-output Xlim kits, stick with the 0.6Ω or 0.8Ω. They will not fit non-Xlim devices, so a Caliburn or an XROS is a no. If you still need a device, the Refillable Pod Kits range has the Xlim and plenty of others.

About King of Pod

King of Pod is a UK brand built around one simple idea: well-made replacement pods for the open pod systems people already own, at a friendlier price than the original cartridges. Rather than chase its own device ecosystem, the brand puts its effort into nailing the fitment and coil quality for popular kits like the OXVA Xlim.

The result is a like-for-like pod that clicks into your existing kit, wicks properly and holds flavour, without tying you to one manufacturer's pricing. For a daily Xlim user, that difference adds up across a year.

Stock Up and Save

Pods are a weekly consumable, so it pays to keep a few ahead. Set them up on The Crow's Nest and a fresh three-pack lands before you run dry, usually cheaper than grabbing one at a time.

Pirate Vapes dispatches every order the same day before 4 pm, all TPD compliant, through an age-verified checkout, over 18s only. Spend over £40 and delivery is free with Free Pirate Post.

Conclusion

If you run an OXVA Xlim, these are an easy way to keep it fed without paying OEM pod prices on every reorder. Three mesh resistances cover everything from a tight MTL draw to an airy RDL one, the top-fill makes refills painless, and three to a pack keeps you stocked.

Fill the 0.4Ω with a High VG E-Liquid for clouds, or the 0.8Ω with salts for a cigarette-style hit. Grab a pack today at Pirate Vapes.

FAQs

Which devices do the Slim Pro XL pods fit?

The full OXVA Xlim range, including the Xlim, Xlim Pro, SE, SQ and Go (except the Xlim C). The 0.4Ω needs a higher-powered kit like the Xlim Pro. They do not fit non-Xlim devices.

Do the Slim Pro XL pods come filled with e-liquid?

No. They are empty refillable pods, so you add your own e-liquid.

Which resistance should I choose in the Slim Pro XL pods?

For a tight MTL draw with nic salts, go 0.8Ω. For clouds and a warmer RDL hit, use the 0.4Ω on a powerful kit. The 0.6Ω splits the difference.

How much e-liquid does the Slim Pro XL pod hold?

The XL shell is a larger 3ml format, but for UK use you fill to the 2ml line to keep it TPD compliant.

Can I run nic salts in the Slim Pro XL pods?

Yes, and the 0.8Ω is made for it. Salts at 10mg or 20mg give a smooth, firm MTL hit. Keep salts to the higher resistances.

How long does one Slim Pro XL pod last?

Depends how you vape, but roughly one to two weeks of daily use. When the flavour dulls, or a faint burnt note creeps in, drop in a fresh one.