Oxva Xlim SQ Vape Kit

Oxva Xlim SQ Vape Kit

A 900mAh MTL pod kit that weighs 44g, fits in a coin pocket, and supports three different coil resistances. The Oxva Xlim SQ runs from 5W to 25W, sips from a 2ml refillable pod, and charges over USB-C.

It is one of the most compact Refillable Pod Kits on the UK market, built for nic salt vapers, ex-disposable users, and anyone who wants a tidy backup device without the bulk of a mod. Draw-activated, side-fill, and fully compatible with the wider XLIM cartridge family.

Why vapers choose this:

• Three coil resistances in one device. Run the 0.6ohm for warmer, looser draws or the 1.2ohm for tight MTL. Same body, three vaping styles.

• Genuinely pocket-sized. 68.5mm tall and 44g in the hand.

• Draw-activated firing removes the button entirely. Inhale, vape, done.

• USB-C fast charging. No dead device sitting on the desk for an hour.

• Works with the whole XLIM cartridge family, so pod stock is easy to find.

Oxva Xlim SQ Features

Slim Square Design

At 14mm thick, the SQ is one of the flattest pod devices OXVA makes. The squared-off design sits differently in the pocket to the standard XLIM. It also includes a lanyard loop on the top corner next to the pod, which is handy if you tend to lose small devices at the bottom of a bag. The loop stays out of the way if you choose not to use it.

Three Coil Options

Most pod kits give you two resistances. The SQ gives you three, and each one changes the vape properly. The 0.6ohm runs restricted DTL with 50/50 or freebase juice. The 0.8ohm is the sweet spot for 20mg Nic Salts at a firm MTL draw. The 1.2ohm takes things tighter still, closer to a cigarette pull, and stretches your battery further per charge. Three genuinely different setups from one device.

Easy Side-Fill Pod

Refilling is done from the side of the pod. Pop open the silicone plug, fill from a nozzle bottle to just under the fill line, and push the plug firmly back into place. That is it. The 2ml capacity is the UK legal limit for a refillable pod, so no surprises there. The seal design keeps liquid off the airflow path and off your fingers.

Adjustable Side Airflow

A smooth airflow control slider sits right on the side of the device chassis. Slide it closed for a tighter MTL draw, or open it up for a looser RDL pull through the 0.6ohm pod. It lets you fine-tune your airflow without removing the cartridge.

Draw-Activated Firing

No buttons, no menus, no wattage adjustment. The chip reads the coil resistance and outputs the appropriate wattage automatically. Inhale to fire. This is a deliberate design choice for people coming off disposables who want the same instinctive experience without the waste and the hardware ban.

Oxva Xlim SQ Colours

Six finishes currently stocked at Pirate Vapes. Each uses the aluminium and PCTG body with different colour treatments across the panels.

#buttons

• Black
• Gold
• Gold Blue
• Light Blue
• Pink
• Pink Green

How to Set Up the Oxva Xlim SQ

Quick swap. Under two minutes from box to first vape.

1. Charge fully over USB-C before first use. The smart LED indicator glows green (65% to 100%), blue (30% to 65%), and red (under 30%) to show your battery level.

2. Choose your cartridge. The 0.6ohm suits 50/50 E-Liquid or lower-strength freebase. The 0.8ohm and 1.2ohm pair best with 10mg or 20mg nic salts.

3. Open the side fill plug. It is a small silicone flap on the pod side. Lift gently and do not force it.

4. Fill with e-liquid to just below the max line. Reseat the plug firmly. Wipe any spill from the base contacts.

5. Sit the pod in the device and wait a solid five minutes before firing. This lets the cotton wick pull the liquid through properly. Vaping too early scorches the coil, and there is no fixing that afterwards.

6. Take two or three gentle draws to prime the airflow. Adjust the side airflow slider to taste from there.

What Is in the Oxva Xlim SQ Box

The kit includes the Xlim SQ device, one 0.8ohm XLIM V2 cartridge (pre-installed), one spare 0.6ohm XLIM V2 cartridge, a Type-C charging cable, a lanyard, and a user manual.

No e-liquid is included, so grab a stock of Replacement OXVA Pods and juice at checkout to save a second order.

Built for the Whole XLIM Family

The SQ takes XLIM V2 and V3 cartridges, which means anyone already running an XLIM Pro, XLIM C, or XLIM V2 can share pods between devices. That is a genuine convenience if you keep a spare kit at work or in the car. Browse the full OXVA Range for compatible kits and accessories in one place.

Not compatible with pods from the NeXlim series, OXBAR devices, or non-OXVA pod systems. Pods from other manufacturers will not seat correctly and will not fire.

About OXVA

OXVA is a Shenzhen-based hardware maker that carved out its reputation with the original XLIM in 2021. The XLIM line is what most people know them for, and the SQ is the flat, squared-off variant built around portability rather than raw output.

 OXVA also runs Unitech, their in-house coil development programme, which is why the V2 and V3 cartridges hold flavour longer than most sub-£5 pods on the market. Every OXVA device sold at Pirate Vapes is sourced through authorised UK channels.

Stock Up and Save

Compact devices tend to get borrowed, misplaced, and dropped down the back of the sofa. Keep a spare in a drawer. Pirate Vapes ships every SQ order age-verified through our checkout, packed in discreet mailers with no branding on the outside.

TPD compliant, over-18s only. Same-day dispatch before 4 pm on weekdays keeps the wait short, and multi-buy pricing across coils and juice brings the running cost down further when you bundle. Pick up a 10ml Nic Salt or two while you are here.

Conclusion

The Oxva Xlim SQ is a strong pick for anyone who wants a small, no-button pod kit that can handle three different vaping styles from a single device.

It is not a cloud chaser, and it is not trying to be. What it does well is deliver a satisfying nic salt hit in a body the size of a car key, with charging fast enough to keep pace with heavier days. 

Pair it with your preferred Nicotine Salt E-Liquid and a couple of spare pods for the long haul. Round out your kit with Vape Accessories or explore the wider range at Pirate Vapes.

FAQs

What coils does the SQ take?

Three resistances. 0.6ohm at 20-25W for RDL, 0.8ohm at 12-16W for standard MTL, and 1.2ohm at 10-12W for a tight cigarette-style draw.

How long does the battery last?

The 900mAh cell typically covers a full day of moderate MTL vaping on the 0.8ohm or 1.2ohm coil. Heavy users on the 0.6ohm should expect one top-up during the day. USB-C brings it back to around 80% in roughly 30 minutes.

What e-liquid should I use?

Nic salts at 10mg or 20mg for MTL through the 0.8ohm and 1.2ohm. 50/50 or 3-6mg freebase for RDL through the 0.6ohm. Avoid high-VG shortfills, as they are too thick for pod coils this small.

Does it take standard XLIM pods?

Yes. It runs both XLIM V2 and V3 cartridges, so it slots into the wider XLIM ecosystem without needing separate pod stock.

How often do pods need replacing?

Most vapers get around one to two weeks per pod, depending on how often they vape and how sweet the juice is. Heavily sweetened liquids gunk coils faster.