Free Shipping On Orders Above £40 (Next Day Delivery)

Offers & Rollbacks Low prices on 100s of items

Free Next Day Delivery
Up to 10PM Same Day Dispatch
Excellent
Trustpilot
Shipping 7 Days a Week
Free Next Day Delivery
Up to 10PM
Excellent
Trustpilot
We ship 7 days a week

SMOK Mag V8 Vape Kit

£24.99 £30.99
(Tax included)

Free Shipping
Secure Payments
Easy Checkout

SMOK Mag V8 Vape Kit

A pistol-grip mod kit that runs on a single external battery and fires up to 70W. The SMOK Mag V8 pairs the M270 mod with the TFV-Mini V2 sub-ohm tank, a 2ml TPD-compliant stainless steel tank that uses SMOK's Baby V2 mesh coils for genuine DTL cloud production. 

The mod accepts 21700, 20700, or 18650 batteries (18650 adapter included, battery sold separately), which means you choose your own cell and carry a spare for all-day vaping without downtime. Two coils in the box: a 0.15ohm S1 single mesh and a 0.15ohm S2 quad coil

Top-fill tank with a locking slide cap, adjustable bottom airflow, and an OLED display near the 510 plate for a clear viewing angle. If you want a Vape Mod kit with a distinctive shape, external battery flexibility, and a tank that genuinely performs at sub-ohm wattages, the Mag V8 delivers. Over 18s only.

Why vapers choose this:

  • External battery means no built-in cell dying after twelve months. When a battery degrades, you replace the battery. Not the mod. A 21700 cell at full charge pushes the Mag V8 harder and longer than an 18650, but you have the choice. Grab a spare from the vape batteries section to carry as a backup.

  • The pistol-grip shape is not just for show. The M270 mod is shaped like a gun handle, with the fire button sitting exactly where a trigger would. Your hand wraps around it naturally, your index finger lands on the fire button without reaching, and the weight balance with a 21700 cell inside sits comfortably in the palm. Not many mods feel this ergonomic.

  • Baby V2 coils deliver proper sub-ohm performance at 70W. The 0.15ohm S1 mesh coil produces dense, warm vapour with sharp flavour at 40W to 70W. The mesh element heats evenly across the entire surface, which means consistent flavour from the first draw to the last before the coil is done.

  • TFV-Mini V2 tank is stainless steel, not plastic. At 25.4mm diameter with adjustable bottom airflow and a locking top-fill cap, the tank is built for daily DTL use. The airflow slots are wide enough for a genuinely open draw when fully open, or you can close them down for a warmer, more flavour-focused pull.

  • Two coils included cover both mesh and traditional preferences. The S1 mesh is the cloud coil. The S2 quad is the flavour coil. Different heating profiles, different draw characteristics, both at 0.15ohm.

SMOK Mag V8 Kit Features

That Grip Design Changes How You Hold a Mod

Most box mods are rectangular. You grip them with your whole hand and your thumb reaches for a button somewhere on the side. The Mag V8 is shaped like a pistol grip, angled so your fingers curl around the body and the fire button sits right under your index finger. 

It sounds like a gimmick until you actually hold one. The ergonomics are genuine, and for vapers who fire their device hundreds of times a day, the reduced finger strain matters more than the shape might suggest.

Three Battery Sizes, One Mod

The Mag V8 accepts a 21700 battery as its primary cell. That is the largest single-cell option commonly available, offering the highest mAh capacity and the longest runtime between charges. 

If you already own 20700 or 18650 batteries from other mods, the Mag V8 takes those too, with the included adapter sleeve for the 18650. Flexibility like that means you are not buying new batteries just because you bought a new mod. 

Browse the SMOK Vapes collection for more kits and accessories.

The TFV-Mini V2 Tank is a Proven Performer

The TFV-Mini V2 (also listed as the TFV8 Baby V2 depending on the kit it originally shipped with) has been one of SMOK's most widely used sub-ohm tanks. 

Stainless steel construction, 25.4mm diameter, top-fill with a locking slide cap that prevents accidental opening, and adjustable bottom airflow with three wide slots. The Baby V2 coil range is still in production and widely stocked, which matters. Nothing worse than owning a tank with discontinued coils. 

Pick up spare Vape Coils while you are here.

Mesh Coil at 0.15ohm for Clouds That Actually Taste of Something

The pre-installed S1 coil runs a single mesh strip at 0.15ohm. At 40W to 70W, it produces thick, warm vapour with strong flavour clarity. 

Mesh heating spreads the energy across a flat surface rather than concentrating it on a small wire, which means more liquid is vaporised per draw, and the flavour profile stays defined rather than getting lost in the heat. 

The spare S2 quad coil at the same resistance uses four traditional kanthal coils for a slightly different texture: denser vapour, warmer throat hit, more of a traditional sub-ohm feel.

Top Fill With a Lock That Works

The TFV-Mini V2 uses a slide-and-lock top cap. Push the drip tip section sideways to expose the fill ports, squeeze your e-liquid in, and slide it back. The locking mechanism holds the cap closed in your pocket. 

It is a simple system that prevents the accidental openings and leaks that plagued earlier SMOK tanks. The DTL Tanks collection at Pirate Vapes has more options if you want to compare.

SMOK Mag V8 Kit Colours

The Mag V8 has been produced in several finishes. 

#buttons

  • Black Red
  • Black Prism Rainbow
  • Red Gold
  • Silver Blue

How to Set Up the SMOK Mag V8 Kit

  1. Insert a battery. Press the magazine release button on the mod (similar to a pistol magazine release). Slide the battery door open. Insert a 21700, 20700, or 18650 (with adapter) battery, positive end first. Close the door until it clicks.

  2. Install a coil into the TFV-Mini V2 tank. Unscrew the tank base from the glass and body. Remove the old coil by pulling it out. Press a fresh Baby V2 coil into the base until it seats firmly. Screw the base back onto the tank.

  3. Prime the coil. Apply four to five drops of e-liquid directly onto the cotton visible through each wicking port on the coil. This saturates the cotton before the first fire and prevents a dry burn.

  4. Fill the tank. Slide the top cap open to expose the fill ports. Fill with high-VG e-liquid (70/30 or 80/20 recommended) to just below the max line. Slide the cap closed until it locks.

  5. Let the coil soak for a full five minutes. The Baby V2 mesh coils use dense cotton that needs time to absorb liquid from the inside out. Firing before the cotton is fully saturated burns the mesh permanently. Five minutes. No shortcuts.

  6. Power on the mod with five clicks of the fire button. Set the wattage using the OLED display. Start at 40W and increase gradually. The S1 mesh coil runs well between 40W and 70W. The S2 quad coil performs best at similar wattages.

What's in the SMOK Mag V8 Kit Box

  • One Mag V8 mod (M270). 

  • One TFV-Mini V2 tank (2ml, TPD compliant). 

  • One Baby V2 S1 0.15ohm single mesh coil (pre-installed). 

  • One Baby V2 S2 0.15ohm quad coil. 

  • One 18650 battery adapter sleeve. 

  • One Micro USB cable. 

  • One replacement glass tube. 

  • User manual and spare parts (O-rings). 

No battery included. No e-liquid included.

The Sub-Ohm Kit for DTL Cloud Vapers

The Mag V8 is built for direct-to-lung vaping with High-VG E-Liquids at 3mg to 6mg freebase nicotine. The sub-ohm coils, adjustable airflow, and 70W output are designed to produce warm, dense clouds with strong flavour. 

Not for MTL vaping. Not for nic salts above 6mg. The open airflow and low-resistance coils will deliver far too much nicotine per draw at higher strengths, and the throat hit will be harsh.

If you already own a separate 510-threaded tank, the Mag V8 mod works as a standalone mod too. The 510 connection is standard, so any compatible tank sits on top.

About SMOK

The Mag line is one of SMOK's most recognisable series, originally launching as a dual-battery mod with the signature pistol-grip design. 

The Mag V8 is the single-battery evolution, keeping the ergonomic shape while reducing the size and weight for vapers who want the Mag experience without the bulk of a dual-cell device. 

SMOK operates under Hong Kong IVPS International Limited and manufactures across a product range that spans pod kits, mods, tanks, and coils. The Baby V2 coil platform connects the Mag V8 to a wide ecosystem of compatible devices and replacement parts.

Stock Up and Save

The Mag V8 needs three things to run: a battery, coils, and e-liquid. Picking up a 21700 battery, a spare pack of Baby V2 S1 mesh coils, and a bottle or two of high-VG e-liquid alongside the kit means you are fully set up from day one without a follow-up order. 

Every order from Pirate Vapes ships the same day before 4 pm in padded packaging. Age-verified checkout, over 18s only. Free Pirate Post on orders over £40.

Conclusion

The SMOK Mag V8 is a 70W mod kit with an external battery, a proven sub-ohm tank, and a grip design that genuinely changes how the device sits in your hand. 

The TFV-Mini V2 tank delivers on both clouds and flavour with the Baby V2 coil platform, and the flexibility to run 21700, 20700, or 18650 cells means you are not locked into a single battery type. 

Two coils in the box, top-fill with a locking cap, adjustable airflow, and a stainless steel build. For DTL vapers who want a mod kit with character, the Mag V8 still holds its own. Browse vape accessories or explore everything at Pirate Vapes.

FAQs

What battery does the Mag V8 use?

A single 21700, 20700, or 18650 battery. Not included. The kit ships with an 18650 adapter sleeve for smaller cells. A 21700 gives the longest runtime.

What coils does the TFV-Mini V2 tank use?

SMOK Baby V2 coils (also labelled Mini V2 coils). The kit includes two: the S1 0.15ohm mesh and the S2 0.15ohm quad coil. Both are sub-ohm and designed for DTL vaping at 40W to 70W.

What e-liquid works best with Mag V8?

High-VG blends at 70/30 or 80/20 with 3mg to 6mg freebase nicotine. The sub-ohm coils and open airflow are not designed for 50/50 liquids or high-strength nic salts.

Can I upgrade the tank capacity of Mag V8?

Yes. A 5ml bubble glass replacement fits the TFV-Mini V2 and more than doubles the 2ml TPD capacity. Available separately.

Is the Mag V8 good for beginners?

It depends on your experience level. The Mag V8 uses an external battery and a sub-ohm tank with replaceable coils, which requires more knowledge than a simple pod kit. If you understand battery safety, coil installation, and wattage settings, the Mag V8 is straightforward. If those terms are new to you, a pod kit might be a better starting point.

Does the mod charge via USB?

Yes. The Micro USB port on the mod allows on-board charging. An external battery charger is recommended for better battery longevity, but on-board charging works in a pinch.

People Also Search For

  • Free shipping

    On all orders over $100

  • Special offers

    Regular sales and discounts

  • Easy returns

    Hassle free returns policy

  • Chat facility

    Talk to a real person