SMOK Morph Pod 80 Kit

SMOK Morph Pod 80 Kit

Up to 80W from a pod kit that still slips into a jeans pocket. The SMOK Morph Pod 80 pairs a built-in 3000mAh battery with SMOK's LP2 coil platform and a 2ml top-fill pod, which is a lot of sub-ohm power for something this compact. It runs a toggle air switch for adjustable airflow, a clear OLED screen up front, and Type-C charging round the back.

Two mesh coils sit in the box for direct-to-lung clouds, with a tighter MTL coil available separately if you want it. If you want a proper sub-ohm hit without carrying a full box mod, this lands right in the Refillable Pod Kits sweet spot.

Why vapers choose this:

• 80W from a built-in 3000mAh battery is genuinely rare in a pod this size, and it means a full day of DTL vaping without hunting for a charger by mid-afternoon

• The whole LP2 coil range drops straight in, so your draw style is never locked to one resistance

• Top-fill through a silicone stopper refills the pod without pulling anything apart

• A real OLED screen shows wattage and battery at a glance

• Zinc-alloy build feels solid in the hand rather than hollow and plasticky

SMOK Morph Pod 80 Kit Features

Eighty Watts You Can Actually Use

Most pod kits tap out around 25 or 30W. The Morph pushes to 80W, and paired with the 0.23ohm mesh coil, that translates into warm, dense clouds on tap. The 3000mAh cell behind it is about as large as a built-in pod battery gets, so the power does not come at the cost of constant charging.

That Toggle Air Switch

Airflow is set by a small toggle that opens or closes the dual air inlets. Flick it towards closed for a tighter, more restricted pull, or open it wide for a full direct-to-lung rush. It is a cleaner solution than a fiddly little ring, and honestly it is one of the nicer touches on the whole kit.

Top-Fill, No Dismantling

The pod fills from the top through a silicone stopper. Lift it, drip your liquid in, press it shut. You never remove the pod from the device to refill, which keeps the whole thing tidy and cuts down on the leaks that plague bottom-fill pods. Pair it with a bottle from our High VG E-Liquid range for the mesh coils.

The LP2 Coil System

The pod runs SMOK's LP2 coils, a well-established range covering everything from low-resistance cloud coils to tighter MTL builds. Coils press straight into the pod base, no screwing or threading. Restock from the wider Vape Coils selection whenever the flavour starts to dip.

Leak-Resistant Where It Counts

SMOK's 3+1 leak-resistant design adds silicone sealing around the coil base and a condensate-trapping section at the bottom of the pod. In plain terms, less juice ends up on your hand or in your pocket. Small engineering details, but they are the difference between a pod you trust and one you carry a tissue for.

SMOK Morph Pod 80 Kit Colours

Eight finishes, all built around a black core with leather-effect and monochrome panels for an understated look.

#buttons

• Black
• Black Blue
• Black Brown
• Black Carbon Fibre
• Black Green
• Black Red
• Brown
• Grey

How to Set Up the SMOK Morph Pod 80 Kit

Short job. A couple of minutes before your first vape.

1. Charge the device fully over USB Type-C. The OLED shows the battery climbing as it tops up.

2. Press your chosen LP2 coil into the base of the pod until it clicks home. No threading.

3. Drip three or four drops of e-liquid straight onto the coil's mesh so it starts out wet.

4. Lift the silicone stopper and fill to the 2ml line, keeping the central airflow tube clear, then press the stopper back down.

5. Drop the pod onto the magnets and let it sit upright for a slow two to three minutes so the cotton fully soaks.

6. Set the wattage to match the coil printed range, start low, and nudge it up until the draw feels right.

What's in the SMOK Morph Pod 80 Box

You get:

• the Morph Pod 80 device with its built-in battery,

• the 2ml Morph 80 pod,

• a 0.23ohm mesh LP2 coil,

• a 0.4ohm mesh LP2 coil,

• a Type-C charging cable,

• and the user manual.

No e-liquid is included, so pick up a bottle to suit the coil you are running. Both coils in the box are sub-ohm and geared towards DTL, so a higher-VG liquid is the right match.

The Sub-Ohm Pod Kit Built Around the LP2 Range

The Morph Pod 80 is designed around SMOK's LP2 coil system, so any LP2 coil fits the Morph 80 pod. The two mesh coils in the box cover DTL, and a 0.6ohm LP2 coil, sold separately, opens up a tighter MTL draw if you want to run stronger nic salts. The LP2 range is shared across several other SMOK pod devices, which keeps coil supply easy.

What it will not take: this is not cross-compatible with RPM or Nord pods, and older SMOK coil families such as the RPM or Nord X coils do not fit the LP2 pod. Stick to LP2 coils, and you are set. Browse the full SMOK Vape Kits line-up if you are matching hardware, or the MTL Vape Kits section if a tighter draw is what you are really after.

About SMOK

SMOK has been one of the biggest names in vaping hardware for over a decade, with a catalogue that runs from the Novo and Nord pod ranges to full sub-ohm mods. The Morph line sits in the middle ground: pod-kit convenience with mod-level power.

The LP2 coil platform that drives this kit is one of SMOK's more versatile systems, spanning a wide resistance range so a single device can flex between cloud-chasing and a tighter draw. Pirate Vapes stocks genuine SMOK hardware, so the kit you receive runs the real LP2 coils it was built for.

Stock Up and Save

The LP2 range is the reason to keep a few spares in the drawer. Different resistances give genuinely different vapes, so it is worth having a couple of coils and a backup pod ready rather than waiting for the flavour to fade mid-week. Buy them together and the per-item cost drops.

Age-verified checkout, TPD compliant, over 18s only. Spend over £40 and delivery is on us with Pirate Vapes Free Pirate Post.

Conclusion

The SMOK Morph Pod 80 is one of the more capable pod kits going: 80W of real sub-ohm power, a large 3000mAh built-in battery, a clean top-fill pod, and the whole flexible LP2 coil range behind it. Two DTL coils come ready in the box, and a quick coil swap takes you towards MTL whenever you fancy a tighter draw.

If you want mod-style output without the bulk, this is a smart pick. Stock up your refills and pods and grab a few bits from Vape Accessories, all shipped fast by Pirate Vapes.

FAQs

What is the difference between the Morph Pod 80 and the Morph S Pod 80?

The Morph Pod 80 has a built-in 3000mAh battery and charges over Type-C. The Morph S takes a removable 18650 battery instead, sold separately. Same coils, same pod, different power source.

Which coils does the Morph Pod 80 use?

The SMOK LP2 range. The kit includes a 0.23ohm and a 0.4ohm mesh coil, both for DTL. A 0.6ohm LP2 for MTL is sold separately.

Can I do MTL with the Morph Pod 80?

Yes, with the right coil. The two coils in the box are DTL, but a 0.6ohm LP2 gives a tighter mouth-to-lung draw.

What is the Morph Pod 80 pod capacity?

2ml, in line with UK rules.

What e-liquid suits the coils in the Morph Pod 80 box?

A higher-VG liquid, ideally 60% VG or more, at a lower nicotine strength. The sub-ohm mesh coils are not built for strong nic salts.

How long does the Morph Pod 80 battery last?

The 3000mAh cell comfortably covers a full day for most vapers. Vaping harder at 80W drains it quicker, but Type-C tops it back up fast.