Smok Novo 4 Mini Replacement Pods

Smok Novo 4 Mini Replacement Pods

Three empty pods to a pack, each holding 2ml, made to keep a Smok Novo 4 Mini running long after the original cartridge gives up. These are the pods for the Mini specifically, and they take the LP1 coil range separately, so the coils are bought on their own. Liquid goes in through a side port sealed with a silicone stopper, the coil press-fits into the base, and a magnetic connection clicks the pod onto the device. Built for MTL vaping.

If your current pod has cracked, clouded up, or started weeping liquid, this is the straightforward fix. Browse every option in Replacement Pods.

Why vapers choose these pods:

• A fresh pod fixes what a fresh coil cannot. When flavour goes flat even after a coil change, the culprit is usually a tired pod: cracked plastic, a worn silicone seal, or gunk in the airflow path that no amount of cleaning shifts.

• Three per pack keeps a spare in the drawer and a spare in the bag.

• Side filling through a stoppered port means you top up without unscrewing anything or pulling the coil.

• The magnetic base drops the pod back in blind, no lining up threads.

• It stays an MTL cartridge whichever LP1 coil you seat in it, so the tight, cigarette-style draw the Mini is known for carries over to every refill.

Smok Novo 4 Mini Pod Features

An Empty Pod Is the Point Here

No coil, no liquid, nothing pre-loaded. That is deliberate. You pick the LP1 coil resistance that suits your nicotine strength and your taste, then run whatever e-liquid you like. One pod, several coil options over its life. Pods are a consumable, and having blanks ready beats waiting on a delivery when one finally splits.

What Does the Silicone Stopper Actually Do?

More than it looks like. The side port is plugged by a silicone bung, and the LP1 coil seats against silicone rings at the base. Between them, the two seal off the routes liquid usually escapes through. Fewer pocket leaks, fewer sticky fingers. Honestly, on a pod this small, leak control is half the battle.

Whistle-Shaped Mouthpiece, Tight MTL Draw

The tapered whistle mouthpiece channels the draw into a narrow, restricted pull. That is the classic mouth-to-lung feel, close to a cigarette, and it pairs naturally with higher-strength salts. The Novo 4 Mini and its cartridge were tuned around this style, which is why it suits ex-smokers and refillable regulars. Compare the wider family under Refillable Pod Kits.

Press-Fit Coils, In and Out in Seconds

The LP1 coil pushes straight into the pod base and pulls straight out. No threading, no tools. When the flavour dulls, you swap the coil in seconds and refill, and the same three pods carry on through coil after coil until the plastic itself wears down.

Made to Match, Not to Improvise

This is the genuine SMOK cartridge shaped for one device. It is not a universal pod trimmed to fit. That matters for the seal, the magnet strength, and the airflow, all of which are cut to the Mini's tolerances rather than approximated.

Pairing the LP1 Coils

The pod is only half the setup. The LP1 coil you seat inside decides your wattage, warmth, and how the flavour lands, so it is worth a quick word. All LP1 options are MTL and low power. Every LP1-compatible option sits in the wider Vape Coils range.

Most popular for salts: the 0.9ohm Meshed MTL, rated best around 15W. It gives a firm throat hit and clean flavour, which is why it ships as the default in the Mini kit and suits 10mg or 20mg salts.

Softer and cooler: the 0.8ohm Meshed coil, run roughly 12W to 15W, leans towards a smoother, gentler flavour if the 0.9 feels too warm.

Higher resistance for economy: the 1.2ohm Meshed MTL, around 10W to 15W, sips power and stretches battery life, handy for all-day salt vaping.

#buttons

• 0.8ohm Meshed
• 0.9ohm Meshed MTL
• 1.2ohm Meshed MTL

How to Set Up the Novo 4 Mini Pod

Quick job. A refill and a coil swap, no tools.

1. Pull the used pod off the device. The magnet releases with a firm tug.

2. Press an LP1 coil into the base of a fresh pod until it clicks flush.

3. Drip two or three drops of e-liquid straight onto the exposed cotton of the coil to wet it before filling.

4. Open the side stopper, fill to just below the top of the window with a 50/50 nic salt or MTL liquid, then push the stopper back in firmly.

5. Stand the pod upright for a full seven minutes so the cotton draws liquid through completely. Skipping this scorches the wick and wastes the coil.

6. Take two or three gentle pulls on the pod before clicking it into the device to help pull liquid into the wick.

7. Click the pod in, and inhale to vape.

What's in the Novo 4 Mini Pod Box

Three empty Novo 4 Mini pods, and that is the lot. No coils, no e-liquid, no device. LP1 coils and your chosen liquid are bought separately, and there is a full spread of E-Liquids to fill them with.

The Cartridge Built for the Novo 4 Mini

This pod is cut for the Smok Novo 4 Mini and no other model. It seats the LP1 coil series, so the coils cross over with several SMOK devices even though the pod does not. It will not fit a standard Novo 4, a Novo 2, an RPM, or any Nord. Those each run their own cartridge shape.

If your device says Novo 4 Mini on it and the coil currently inside is an LP1, you are in the right place. More of the range sits under Pod Kits.

About SMOK

SMOK built the Novo line into one of the most recognised pod families in UK vaping, and the Novo 4 Mini is the compact end of it. The LP1 platform is the clever part: a small MTL cartridge with press-fit coils and stacked silicone sealing, aimed squarely at ex-smokers and refill users who want a tight draw without leaks.

SMOK spreads the same coil format across the Novo 4, the Nfix Pro, the Pozz Pro and the RPM 25W, which keeps coil supply broad and easy to source. The pod, though, stays specific to the Mini.

Stock Up and Save

Pods are a wear item. They cloud, they crack, and the seals soften with daily use, so one three-pack rarely lasts as long as the coils that pass through it. Grabbing a couple of packs at once means you are never stuck vaping a leaking cartridge while a replacement is in transit.

Every order from Pirate Vapes ships same day before 4 pm in padded packaging. All stock is TPD compliant, checkout is age-verified, and it is strictly over 18s only. Free Pirate Post lands on orders over £40.

Conclusion

The Novo 4 Mini pods do one job and do it cleanly: they keep a working device working once the original cartridge has had enough. Three blanks, a 2ml capacity, press-fit LP1 coils, and the tight MTL draw the Mini was built around.

If your pod is leaking or the flavour has gone dull past a coil change, a fresh pack sorts it. Explore the wider SMOK Range and stock up on Vape Accessories at Pirate Vapes.

FAQs

Do Novo 4 Mini pods come with a coil?

No. They are empty. You add an LP1 coil and your own e-liquid separately.

Will the Novo 4 Mini pods fit a standard Novo 4?

These are shaped for the Novo 4 Mini. The standard Novo 4 uses a different pod, even though both share LP1 coils. Match the pod to your exact device.

How many Novo 4 Mini pods are in a pack?

Three.

Which Novo 4 Mini pod coil should I start with?

The 0.9ohm Meshed MTL at around 15W is the default and the safe first pick for 10mg or 20mg salts. Drop to the 0.8ohm if you want it cooler.

What e-liquid works best with Novo 4 Mini pods?

A 50/50 nic salt suits the tight MTL draw and the low-power LP1 coils. High-VG liquids are too thick to wick properly and will dry-hit.

How long does a Novo 4 Mini pod last before it needs replacing?

The coil wears out first and gets swapped often. The pod itself carries on for weeks, until the plastic clouds, cracks, or the seal starts to leak. That is when you fit a fresh one.