SMOK RPM 2 Pod Kit

Cloud chaser or cigarette-style vaper? The RPM 2 does not make you pick a side. It ships with two pods and two coils, one built for sub-ohm DTL clouds and one for a snug MTL draw, so you try both from day one. Behind them sits a 2000mAh battery, up to 80W of power you set yourself, and Smok's IQ-X chip firing in a thousandth of a second.

A 1.14-inch colour screen keeps tabs on your wattage, battery and puff count. Zinc alloy body. USB-C fast charge. Side-fill pods holding 2ml each. Pirate Vapes ships it age-verified across the UK.

Why vapers choose this:

• Two pods, two coils, two styles right out of the box, no extras to buy.

• 80W of adjustable power backed by a 2000mAh battery that lasts a full day.

• A colour screen that actually tells you things: wattage, battery, resistance, puff count.

• Fires in 0.001 seconds, so there is zero lag between pressing and puffing.

• Works with both the RPM and RPM 2 coil ranges, which is a huge library of resistances.

SMOK RPM 2 Pod Kit Features

DTL and MTL From the Same Device

This is the reason most people buy it. One pod holds a 0.16Ω RPM 2 mesh coil for warm, thick sub-ohm clouds. The other holds a 0.4Ω RPM mesh coil for a tighter pull that suits nic salts. Pop one out, click the other in. The chipset spots the new coil and adjusts, so there is nothing to reconfigure. Genuinely two kits in one.

80W and a Screen You Will Actually Use

Plenty of pod kits have a screen that shows a battery bar and not much else. The RPM 2's 1.14-inch OLED lays out your wattage, voltage, coil resistance, battery percentage, and a running puff count, plus it estimates how many puffs you have left. Handy. And with 80W on tap, you can push the 0.16Ω coil hard or dial things right back on the 0.4Ω. The up and down buttons sit on the side, right under your thumb.

Lasts the Day, Charges Fast

The 2000mAh battery gets most people through a full day, even mixing DTL and MTL pods during the same session. When it does run low, 1.4A USB-C charging fills it in roughly seventy-five minutes. You can also vape while it charges (passthrough), which is a genuine bonus on a long evening or a night out.

That IQ-X Firing Speed

Smok quotes 0.001 seconds. In practice, it means zero perceptible delay; press the button and the vapour is already there. It makes the draw feel natural rather than sluggish, and it matters more than you'd expect on the MTL pod where even a tiny lag throws the rhythm off.

Tough, Transparent, Magnetic

The body is zinc alloy, solid enough to shrug off being dropped on a pavement. The pods are clear PCTG, so you can see your juice level without pulling them out. And the magnetic connection is strong, a firm click when you seat the pod, no wobble, no rattle in a pocket. The orange side-fill stopper is easy to find by feel in the dark, which sounds trivial until you are refilling at midnight.

SMOK RPM 2 Pod Kit Colours

Six finishes, all on the same zinc alloy body. The Prism options shift colour depending on the light, which looks better in person than in photos.

Safe picks:

• Bright Black - sharp, minimal, hides scratches

• Red - bold without being loud

The Prism range:

• Prism Blue - shifts between blue and purple in the light

• Prism Rainbow - a vivid, multi-tone colour shift

• Prism Gold - warm and shimmery

• Prism Deep Tarnish - dark, moody, almost gunmetal in some light

All six are the same device underneath. 

How to Set Up the SMOK RPM 2 Pod Kit

1. Plug the USB-C cable in and charge until the screen reads full.

2. Pick a pod. The RPM 2 pod already has the 0.16Ω coil fitted for clouds. The RPM pod has the 0.4Ω for a tighter draw.

3. Lift the orange stopper on the side, fill with e-liquid, and press it shut.

4. Leave the pod standing for five minutes. This lets the cotton soak and stops that awful dry first hit.

5. Click the pod onto the device, tap the fire button five times to power on, set your wattage, and vape.

What's in the SMOK RPM 2 Pod Kit Box

You get the: 

• RPM 2 device itself, 

• two pods with their coils already fitted (a 0.16Ω RPM 2 mesh in one and a 0.4Ω RPM mesh in the other), 

• a USB-C cable, 

• a manual 

• and a warranty card. 

No e-liquid, so grab a 70-30 Shortfill if you are after clouds or Nic Salts if the MTL Pod is more your thing.

Built for the RPM and RPM 2 Coil Series

The Smok RPM 2 system uses two different pod types, each designed for its own coil family. The RPM 2 pod works with RPM 2 coils (0.16Ω, 0.25Ω, 0.3Ω, and 0.6Ω) and is designed for DTL vaping with larger clouds and a more powerful sub-ohm style.

The RPM pod works with original RPM coils (0.4Ω, 0.8Ω, 1.0Ω, and 1.2Ω) and is better suited to MTL and restricted draws.

The key thing to remember is that RPM 2 coils only fit RPM 2 pods, and RPM coils only fit RPM pods. Although they look similar, they are not interchangeable, so using the wrong coil type can damage the pod.

About SMOK

There was a time when getting variable wattage and a proper screen meant carrying a chunky box mod. The RPM 2 was one of the kits that changed that, packing 80W, a colour display and a dual-coil pod system into something you can genuinely pocket.

It sold in big numbers for good reason: it works, spares are everywhere, and the coil range is deep enough that you can fine-tune your draw over months rather than outgrowing the kit in weeks. SMOK has moved on to newer models since, but the RPM 2 still holds its own as a reliable, well-supported daily device.

Stock Up and Save

You buy the kit once. After that, it is pods and coils you get through. Keeping a 3-pack of each pod type plus a few spare coils means you are sorted for weeks. We send only genuine SMOK, packed carefully and dispatched tracked so you can follow it to your door.

Checkout is age-verified, 18+ delivery, and the pods are the 2ml TPD size. If you would rather skip the reordering, The Crow's Nest posts your coils and pods on a schedule, with a saving built in.

Conclusion

The RPM 2 earns its spot by doing two jobs well instead of one badly. Big clouds on the RPM 2 pod, a firm MTL pull on the RPM pod, and the power, screen and battery to back both up properly. It is not the Newest Smok Kit on the shelf, but it is proven, widely supported, and still hard to beat at the price for a dual-style pod mod. Add your juice and go. Grab yours from Pirate Vapes with fast, age-verified UK delivery.

FAQs

Can it actually handle both MTL and DTL?

Yes, and that is the whole point. Two separate pods with two separate coils, one built for clouds and one for a tight draw. Swap them in seconds.

RPM pod or RPM 2 pod, what is the difference?

They take different coils. The RPM 2 pod is for RPM 2 coils (sub-ohm, DTL). The RPM pod is for RPM coils (MTL, higher resistance). You cannot mix them up, the coils are different sizes.

Do I have to set the wattage myself?

You do, but it is not complicated. The up and down buttons are right there, and the screen shows you the number. Start around 30W on the 0.16Ω coil. Around 15 to 20W on the 0.4Ω. Adjust to taste.

Battery life, honestly?

A full day for most people. If you are hammering the 0.16Ω at 60W all day, you might need a top-up by evening, but the passthrough charging means you vape while it charges. Around seventy-five minutes back to full.

The coils are already in the pods when it arrives?

Yes. Both pods ship with their coil fitted. Fill, wait five minutes for the soak, vape. Spare coils are sold separately when the originals wear out.

What juice goes in which pod?

The 0.16Ω cloud pod wants a thick 70-30 Shortfill. The 0.4Ω MTL pod is happier with Nic Salts or a 50-50 E-Liquid. The bottle will tell you its ratio.