SMOK Solus Replacement Pods

SMOK Solus Replacement Pods

A 0.9ohm mesh coil built straight into a 2ml refillable pod, sold three to a pack. The SMOK Solus Replacement Pods are the direct swap-ins for the SMOK Solus pod kit, handing you a fresh integrated mesh coil every time the flavour starts to dull.

They refill through a silicone-stoppered port, lock onto the device by magnet, and run a tight mouth-to-lung draw that suits nic salts and 50/50 juice. There are no separate coils to screw in and no tank to build. When the taste fades, you drop in a new pod. These are simple Replacement Pods done right.

Why vapers choose these:

• The coil is inside the pod, so there is nothing separate to fit or prime. A fresh pod is a fresh coil, and that is the whole maintenance routine.

• 0.9ohm mesh heats a wider surface than old wound wire, giving cleaner flavour through the life of the pod.

• 2ml refillable means you pick the flavour and strength rather than being tied to a prefilled option.

• Magnetic fit. No threads, no fiddling. It clicks and holds.

• Three per pack, which covers most daily MTL vapers for a good few weeks before the flavour drops off.

SMOK Solus Replacement Pods Features

Built-In Mesh Coil

The mesh coil lives inside the pod itself. There is no coil to unscrew and no build to worry about. When flavour dulls, or the pod starts to taste tired, you swap it for a fresh one, and the coil comes with it. That is what makes the Solus one of the lower-maintenance options among Vape Coils and pod systems.

0.9Ω MTL Coil

Because it keeps the draw tight and the vapour modest, closer to the pull of a cigarette. The mesh element still lifts flavour thanks to its wider heating area, so you get a clean, defined taste without clouds. For anyone chasing an MTL style rather than big plumes, this resistance is the sweet spot.

Easy Side-Fill Design

Refilling is quick. Lift the silicone stopper, add your liquid, seat the stopper back down and you are set. Because the coil is fresh in a new pod, give the mesh five to ten minutes to soak before the first draw. That short wait is the difference between a clean first pull and a dry, harsh one.

Durable Magnetic Pod

The pod is moulded from PCTG, a hard-wearing plastic that shrugs off the daily bumps a pocket device takes. The duck-billed mouthpiece funnels vapour neatly to the lips, and the magnetic base clicks in the same way every time. It is a small, sturdy pod made for constant handling.

Works Best With 50/50 and Nic Salts

This coil wants thinner juice. Nic salts at higher strengths work well for a fast, smooth hit, and our 20mg Nic Salts range is the obvious pairing for an MTL setup like this. Prefer freebase? Stick to 50/50 E-Liquids so the mesh wicks properly and the flavour stays true.

SMOK Solus Replacement Pods Coil and Refill

There is one coil option here, and it is the point of the pod: a 0.9ohm integrated mesh head tuned for MTL. It is not adjustable, and it is not removable, because the coil and pod are a single unit designed to be replaced together.

#buttons

• 0.9 Ohm Mesh

How to Fit and Refill the SMOK Solus Pods

A couple of minutes from packet to first pull.

1. Take a fresh pod from the three-pack and peel away any protective film or plug.

2. Open the silicone stopper on the side fill port and add your chosen e-liquid slowly, keeping it under the fill line.

3. Press the stopper firmly back so it seals flush and nothing weeps out.

4. Clip the pod to the device. The magnets pull it into place with a light click.

5. Stand the device upright for five to ten minutes so the thick cotton wick completely saturates.

6. Start with gentle draws on the first few pulls once soaked, then vape as normal once the flavour comes through.

What's in the SMOK Solus Replacement Pods Box

Three SMOK Solus refillable pods, each with its 0.9ohm mesh coil already fitted. That is it. No e-liquid, no device, and no charging cable, since these are replacements for a Solus kit you already own.

Made for the Entire SMOK Solus Family

These pods are the original cartridges built for the SMOK Solus kit, but their universal design means they drop straight into the Solus 2, Solus G, and Solus G-Box devices as well. If you own any kit in the Solus family, these will fit.

You will find the wider SMOK Vapes line here if you need other parts for the system. What these will not do is fit unrelated SMOK devices like the Nord or Novo. Each of those runs on its own pod platform with a different shape and connection, so a Solus pod simply will not seat.

About SMOK

SMOK spent years known for big sub-ohm cloud hardware before turning that engineering toward simple, pocketable pod systems. The Solus sits in that second camp: a slim MTL device with an integrated mesh coil aimed at ex-smokers and anyone who wants flavour without the upkeep of building coils.

The replacement pods keep the same 0.9ohm mesh the kit shipped with, so the vape stays consistent long after the first pods wear out. Buying genuine SMOK pods is the way to keep that performance honest.

Stock Up and Save

At three pods a pack and steady daily use, these last a good while, but flavour always drops off eventually, so a spare pack in the drawer saves a mid-week scramble.

Pirate Vapes dispatches every order the same day when it is placed before 4 pm, packed for the letterbox. All stock is TPD compliant, sold through an age-verified checkout to over-18s only, with Free Pirate Post on orders over £40.

Conclusion

The SMOK Solus Pods are the straightforward way to keep a Solus running: a 2ml refillable pod with a 0.9ohm mesh coil baked in, three to a pack, no separate coils to manage. They suit MTL vapers who want clean flavour and minimal fuss, and they take whatever nic salt or 50/50 liquid you prefer.

They only fit the Solus system, so check your device first, but for Solus owners they are the simple, genuine refill. Browse more SMOK parts, refills, and pods over at Pirate Vapes.

FAQs

What device do Solus Replacement Pods fit?

They fit the entire SMOK Solus family: the original Solus, Solus 2, Solus G, and Solus G-Box. They will not fit unrelated SMOK devices like the Nord or Novo.

Do I need to change the coil of the Solus Replacement Pods?

No. The 0.9ohm mesh coil is built into the pod, so when it wears out you replace the whole pod rather than a separate coil.

How much liquid does a Solus Replacement pod hold?

2ml in UK spec, which keeps it within TPD rules. You refill through the silicone-stoppered port whenever it runs low.

What e-liquid works best with Solus Replacement Pods?

Thinner blends. 50/50 or higher-PG liquids and nic salts wick properly through the mesh. Thick high-VG juice can lead to dry hits on a 0.9ohm MTL coil.

How many Solus Replacement Pods come in a pack?

Three. That tends to keep a daily MTL vaper going for several weeks before flavour starts to fade.

How long does each Solus Replacement Pod last?

It varies with how much you vape and how sweet your liquid is. Sugary flavours gunk the mesh faster, so expect anywhere from several days to a couple of weeks per pod.