Uwell Caliburn A3S Refillable Pods

Uwell Caliburn A3S Refillable Pods

Four 2ml refillable pods to a pack, each with a mesh coil already built in, in your choice of 0.8ohm or 1.0ohm. These are the genuine Uwell Caliburn A3S replacement pods for anyone running the A3S who wants fresh, sharp flavour without rebuilding anything.

Fill from the side port, click the pod onto the magnetic connection, and you are away. They live in the Refills & Pods range and suit any of our Refillable Pod Kits. Mouth-to-lung all the way, and TPD compliant for the UK.

Why vapers choose this:

• No coil changes to fumble with. The coil sits inside the pod, so when the flavour starts to fade you drop in a fresh one and carry straight on, no cotton, no rebuilds, nothing to unscrew.

• Two resistances, two draws. The 0.8ohm pulls a touch airier, the 1.0ohm tighter.

• You can see your level. The transparent shell shows exactly how much liquid is left before a refill.

• Genuine Uwell. Real pods, not clones.

• Fills from the side. Lift the stopper, top up, seal, done in seconds.

Uwell Caliburn A3S Features

The Mesh Coil Does the Heavy Lifting

Mesh heats more evenly than an old-style wire coil, which means the liquid vaporises across a wider surface and the flavour lands cleaner. That is the real reason these pods taste brighter than a basic cartridge. If you are pairing them with a device, the MTL Vape Kits range is the natural home for them.

Why Two Resistances?

Because not everyone wants the same draw. The 0.8ohm gives a slightly more open pull with a little more vapour, while the 1.0ohm keeps things tight and cigarette-like. Worth trying both if you cannot decide, honestly. Higher-strength salts tend to sit better on the tighter pod.

A Clear Body That Earns Its Keep

The transparent PCTG shell is not just for looks. Running a pod dry scorches the wick and ruins the taste, so being able to glance at your level and top up in good time genuinely extends how long each pod lasts. Small thing, big difference.

Fill It From the Side, Skip the Mess

Lift the silicone stopper on the side, tilt your bottle in, and fill to just under the line. No airflow hole to accidentally flood, no wrestling with a tiny top cap. Press the stopper back, and it seals tight against leaks in your pocket or bag.

Magnetic Click, Then You're Off

Drop the pod towards the device and the magnets pull it into place and hold it there. No threads to cross, no lining up a plug in the dark. It is the kind of small, sturdy detail that makes the A3S an easy daily carry, and part of why these pods are a Pirate Vapes staple.

Uwell Caliburn A3S Resistance Options

Two resistances, both mesh, both mouth-to-lung. The difference is all in the draw, so pick based on how tight you like your inhale and how strong your liquid is.

Most people start with the 0.8ohm. It gives a slightly airier pull with a bit more vapour and brings fruity and menthol profiles forward nicely, which makes it the more versatile of the two for everyday vaping. It handles lower-strength salts and 50/50 liquids well.

The 1.0ohm takes the opposite route. A tighter, more restricted inhale, closer to the pull of a cigarette, and it pairs best with stronger 20mg salts where you want a firmer throat hit and slightly less vapour. Both take standard Nic Salts.

#buttons

• 0.8ohm
• 1.0ohm

How to Set Up the Uwell Caliburn A3S Pods

Under two minutes, start to finish.

1. Pull the old pod straight off the device. The magnets release with a firm tug.

2. Lift the silicone stopper on the side of the fresh pod to open the fill port.

3. Fill with your nic salt to just below the max line, keeping clear of the central airflow tube.

4. Press the stopper back in firmly so it seals flush.

5. Stand the pod upright for a full five minutes so the mesh wick can pull liquid all the way through before you fire it. Rushing this is the number-one cause of a burnt first pull.

6. Take a couple of gentle draws to start rather than long, hard pulls, and let the coil settle in.

What's in the Uwell Caliburn A3S Pods Box

Four Uwell Caliburn A3S refillable pods in your chosen resistance, each with a mesh coil already fitted and the silicone side stopper in place. That is the lot. No e-liquid, no device, and no charging cable. These are replacement pods for a Caliburn A3S, or A3, that you already own.

Made for the Caliburn A3 Series

These pods click straight onto the Caliburn A3S, but Uwell kept the fitment universal across the whole A3 generation. They also fit the original Caliburn A3, the AK3, the AZ3, and the AZ3 Grace. Both devices take the same 0.8ohm and 1.0ohm pods, so you are covered either way. Need the device itself? The full Uwell Range has it. Every A3S pod sold through Pirate Vapes is the genuine Uwell article.

They do not fit the G-series (G2, G3), the A2 or A2S, or the Koko pods. Different pod shape, different magnets. If you are unsure which device you have, check the model name printed on the base before ordering; it saves a return.

About Uwell

Uwell launched the Caliburn in 2019, and it quickly became the pod that other brands get measured against. The series built its name on smooth mouth-to-lung draws and coils that hold their flavour, which is how it stayed on best-seller lists for years rather than months.

The A3S is the refined follow-up to the A3, carrying Uwell's mesh coil work forward for cleaner taste and steadier performance pull to pull. For the wider Uwell parts range, browse our Uwell Coils collection.

Stock Up and Save

Coils fade; that is just vaping. Keeping a spare four-pack in the drawer means you are never stuck with a tired pod and no backup on a Sunday night.

Pirate Vapes dispatches every order the same day when it lands before 4 pm, packed to survive the post. Age-verified checkout, over 18s only, and every pod here is TPD compliant. Buy a couple of packs together, and the per-pod cost comes down.

Conclusion

The Uwell Caliburn A3S refillable pods are the simple, reliable way to keep your A3S or A3 tasting fresh: two resistances, a clear 2ml body, and a genuine mesh coil in every one.

Pick the resistance that matches your draw, keep a spare pack handy, and you will rarely be caught out. Grab a few Vape Accessories while you are here, and everything ships fast from Pirate Vapes.

FAQs

How many Caliburn A3S pods come in a pack?

Four. Each Caliburn A3S pod arrives with its mesh coil already built in, in either 0.8ohm or 1.0ohm.

Will Caliburn A3S pods fit my Caliburn A3?

Yes. Uwell kept the fitment universal across the entire A3 generation. These pods work perfectly on the Caliburn A3, A3S, AK3, AZ3, and the AZ3 Grace.

How do I fill Caliburn A3S pods?

Lift the silicone stopper on the side, fill to just under the max line with the 2ml limit in mind, then press the stopper back. Stand it upright for a few minutes before your first vape.

Which resistance should I pick for Caliburn A3S pods?

0.8ohm for an airier draw and brighter flavour, 1.0ohm for a tighter pull and a firmer hit. Stronger salts usually sit best on the 1.0ohm.

How long does one Caliburn A3S pod last?

It depends how much you vape, but most people get several days to a week from a single pod before the flavour starts to dull. Then drop in a fresh one.

Are Caliburn A3S pods compliant for UK sale?

Yes. 2ml capacity, notified for the UK market, over 18s only.