Uwell Caliburn G3 Pro Pod Kit

The first Caliburn with a full-screen display. A 1000mAh zinc alloy pod kit pushing up to 35W with adjustable airflow, dual activation (button fire and auto-draw), and compatibility with every pod in the Caliburn G3 range. Two 2ml mesh pods included: a 0.4ohm for warm RDTL draws and a 0.9ohm for tighter MTL vaping. 

The screen shows wattage, resistance, battery life, puff count, and activation mode in real time, all through a dynamic UI that responds as you vape. USB-C 2A fast charging, Pro-FOCS flavour technology, and a clearview juice window so you always know when to refill. Six standard colours plus special edition finishes. Over 18s only. Browse the full Uwell Range at Pirate Vapes.

Why vapers choose this:

• The full-screen display is genuinely useful, not a gimmick. Wattage, coil resistance, battery percentage, puff counter, and activation mode all visible without squinting at a tiny OLED strip.

• 35W from a pod kit means the 0.4ohm pod actually performs. Warm, dense RDTL vapour from a device that still fits in your pocket.

• Adjustable airflow with a fine-tuning slider lets you dial in exactly the draw tightness you want, from cigarette-tight through to wide open. First Caliburn to offer this.

• Dual activation gives you options. Auto-draw for simplicity, button-fire for control. Switch between them with two presses.

• Full G3 pod platform compatibility across four resistances means you can run MTL nic salts on the 0.9ohm today and swap to the 0.4ohm with freebase tomorrow without changing devices.

Uwell Caliburn G3 Pro Features

That Screen Changes How You Use a Pod Kit

Most pod kit screens are small OLED strips showing a battery bar and maybe a resistance reading. The G3 Pro's display covers the entire front face. Wattage, resistance, battery level, puff count, and activation mode are all displayed simultaneously with dynamic animations that respond as you draw. 

It looks impressive, fair enough, but the real benefit is practical: you can actually read your settings at a glance without tilting the device or squinting. Adjusting wattage on screen means you know exactly what power level you are running, which matters when switching between pod resistances.

Adjustable Airflow on a Caliburn. Finally.

Previous Caliburn devices gave you the airflow the pod decided. The G3 Pro adds a fine-tuning airflow slider on the side of the device. Tighten it all the way for a proper cigarette-style MTL pull with the 0.9ohm pod and nic salts. 

Loosen it for a warmer, cloudier RDTL draw with the 0.4ohm at 35W. That level of control was previously reserved for larger devices. Having it in a pocket-sized Pod Kit is a genuine advantage.

Pro-FOCS Flavour Technology Does the Heavy Lifting

Uwell's Pro-FOCS system is their proprietary approach to flavour restoration inside the pod. It focuses on maintaining consistent liquid feed to the mesh coil so that flavour stays stable from fill to fill rather than peaking on the first refill and then slowly dropping. 

Combined with the FeCrAl mesh coil construction inside each pod, the result is noticeably cleaner flavour compared to standard pod systems. It is one of those things that is hard to explain in specs but obvious when you compare side by side.

Zinc Alloy Build With a Clearview Window

The body is zinc alloy, not plastic. It has weight to it. Feels like a proper device in your hand rather than something disposable. The clearview juice window runs along the side so you can see your liquid level without removing the pod. 

One thing worth knowing: the full-screen display is glass, and some users report it can crack if dropped onto hard surfaces. Worth keeping in a case or pocket that is not full of keys and coins.

2A USB-C Charges Fast Enough to Matter

1000mAh at 2A charging means you go from empty to full in roughly 30 to 40 minutes. That is fast enough to top up during a lunch break and have a full battery for the rest of the day. 

At moderate MTL use on the 0.9ohm pod, the battery comfortably lasts a full day. RDTL vaping at 35W on the 0.4ohm will drain it faster, obviously, so heavier users may want to charge once midday.

Uwell Caliburn G3 Pro Colours

Six standard colours are available. The standard range uses a matte zinc alloy finish, while special editions add textured panels for extra grip.

#buttons

• Emerald Green
• Midnight Black
• Pacific Blue
• Rose Gold
• Space Gray
• Stone Gray

How to Set Up the Uwell Caliburn G3 Pro

Straightforward process. The screen walks you through most of it visually once you power on.

1. Charge the device using the included USB-C cable. The full-screen display shows charging progress in real time. At 2A, a full charge from empty takes roughly 30 to 40 minutes.

2. Choose your pod. The 0.9ohm pod for MTL vaping with nic salts at 10mg or 20mg. The 0.4ohm pod for RDTL draws with freebase at 3mg to 6mg. Slide the silicone plug on the side of your chosen pod to expose the fill port.

3. Fill the pod with your e-liquid to just below the max line. 50/50 or higher-PG blends for the 0.9ohm. Up to 60/40 VG/PG works for the 0.4ohm. Close the silicone plug firmly until it sits flush.

4. Let the pod rest upright for four to five minutes before inserting it into the device. The FeCrAl mesh needs time to absorb liquid evenly through the integrated wicking material. Firing the coil dry scorches the mesh on the first draw and the flavour never recovers.

5. Click the pod into the device. The magnetic connection seats it firmly. The screen will display the detected resistance automatically.

6. Press the fire button five times to power on. Adjust wattage by pressing three times and using the button to cycle through power levels. Take a gentle first draw and adjust the airflow slider to your preference.

What's in the Uwell Caliburn G3 Pro Box

• One Caliburn G3 Pro device, 

• one 0.4ohm Caliburn G3 integrated coil pod, 

• one 0.9ohm Caliburn G3 integrated coil pod, 

• a USB-C charging cable, 

• and a user manual. 

No e-liquid included. Pick up a bottle of e-liquid to get started.

Built on the Caliburn G3 Pod Platform

The G3 Pro runs on Uwell's G Pod Platform, which means every pod in the Caliburn G3 series fits this device. Four resistances are available: 0.4ohm for RDTL at up to 35W, 0.6ohm for a looser MTL or light RDTL draw, 0.9ohm for standard MTL with nic salts, and 1.2ohm for a very tight, cool pull at low wattage.

All G3 pods use integrated coils. When the flavour drops off, you replace the entire pod rather than swapping a coil inside it. No mess, no handling loose coil heads, no guessing whether the coil is seated properly. The trade-off is that each pod replacement costs slightly more than a standalone coil, but the convenience and leak resistance are worth it for most vapers.

If you already own a Caliburn G3 or Caliburn G3 Lite, any spare pods you have will work in the Pro too. The pod platform is shared across the entire G3 family, so upgrading to the Pro does not mean starting over with new consumables.

About Uwell

Caliburn is the product line that made Uwell a household name in pod vaping. The original Caliburn launched to widespread acclaim for its flavour quality, and each generation since has refined the formula: better coils, bigger batteries, more control. 

The G3 Pro represents the most feature-rich Caliburn to date, adding a full-screen display, adjustable airflow, and 35W output to a platform that was already one of the most trusted in the Refillable Pod Kit market. 

Uwell's Pro-FOCS flavour technology runs across the Caliburn range, and the G3 pod platform ensures continuity between devices for anyone already invested in the ecosystem.

Stock Up and Save

Two pods in the box get you started, but with daily use you will want replacements within a week or two. Grabbing a spare pack of G3 pods in your preferred resistance keeps you covered without a gap in supply. 

If you tend to alternate between MTL and RDTL, keeping both a 0.9ohm and a 0.4ohm pack on hand gives you the flexibility to switch draw styles without waiting for a delivery. 

Every order from Pirate Vapes ships same day before 4 pm in padded device-safe packaging. TPD compliant, age-verified checkout, over 18s only. Spend over £25 and delivery is free with Free Pirate Post.

Conclusion

The Caliburn G3 Pro is the most complete pod kit Uwell has made. A full-screen display that actually helps, adjustable airflow that actually adjusts, 35W for genuine RDTL performance from the 0.4ohm pod, and a 1000mAh battery with 2A USB-C charging that refills in under 40 minutes. 

Four G3 pod resistances cover everything from tight MTL through to open RDTL, and the shared pod platform means your consumables carry over if you already own a Caliburn G3. Zinc alloy build, Pro-FOCS flavour tech, and a clearview juice window round it out. 

If you want a pod kit that does not make you choose between portability and control, the G3 Pro delivers both. Pick one up at Pirate Vapes.

FAQs

What pods fit the Caliburn G3 Pro?

All Caliburn G3 series pods. That includes 0.4ohm, 0.6ohm, 0.9ohm, and 1.2ohm options. Integrated mesh coils in each pod, magnetic connection, side fill.

Can I use nic salts in the G3 Pro?

Yes. The 0.9ohm and 1.2ohm pods are designed for nic salts at 10mg to 20mg with a MTL draw. Avoid using 20mg nic salts in the 0.4ohm pod at 35W. The combination is far too harsh.

How do I switch between button fire and auto-draw?

Press the fire button twice. The screen confirms which mode is active. Auto-draw fires when you inhale. Button mode requires holding the fire button while drawing.

How long does the G3 Pro battery last?

A full day for moderate MTL vapers on the 0.9ohm pod. RDTL vaping at 35W on the 0.4ohm pod drains faster and may need a midday top-up. USB-C at 2A charges from empty in roughly 30 to 40 minutes.

Is the Caliburn G3 Pro screen fragile?

It is glass. It can crack if dropped onto hard surfaces or subjected to impact in a pocket with hard objects. Treat it like you would a phone screen. A protective case helps if you are prone to drops.