Uwell Caliburn G2 Replacement Pods

Uwell Caliburn G2 Replacement Pods

The pod lasts; the coil gets swapped. That is the idea behind the Uwell Caliburn G2 Replacement Pods, a pack of two refillable 2ml pods built around a plug-and-play coil you change when the flavour drops off, rather than binning the whole pod every time.

They fill from the top, carry an adjustable airflow control for tuning the draw, and are set up for MTL vaping with 50/50 and high-PG e-liquids. Made specifically for the Caliburn G2, these Replacement Pods keep a proven pod kit running for less.

Why vapers choose this:

• The pod outlives the coil. With a fixed-coil pod, worn flavour means the whole pod goes in the bin. Here you just pull the spent coil and push in a fresh one, so the pod itself keeps going for weeks. Cheaper over time, and less waste.

• Top fill makes refilling a ten-second, mess-free job.

• Adjustable airflow lets you set the draw from tight MTL to something looser.

• Plug-and-play coils mean no threading, no cotton, no fuss.

• Genuine Uwell pods built for a reliable, well-liked device.

Uwell Caliburn G2 Replacement Pods Features

Easy Push-Fit Coil Replacement

The headline feature is the plug-and-play coil. There is nothing to screw, no wire to handle, and no cotton to prep. You pull the old coil out of the base and push a fresh one in until it clicks. For anyone who found coil changing fiddly on other systems, this is about as simple as it gets, and it is why the Caliburn G stays a firm favourite.

Reusable Pod Design

Because the coil is separate, a worn coil does not mean a dead pod. Swap the coil when the flavour dulls and the same pod carries on. You only replace the pod itself if it starts to leak, crack, or discolour, which keeps your ongoing cost down to mostly coils and juice.

Easy Top-Fill Design

Refilling is quick and clean. Apply sideways pressure to the black mouthpiece to snap it off the pod, revealing a red fill valve. Push the tip of your e-liquid bottle through the red valve, fill with 50/50 e-liquid, snap the mouthpiece back on, and you are done. No need to pull the pod off the device or turn it upside down, so there is little chance of spillage.

Adjustable Airflow

Unlike older pods, the G2 replacement pod features a small red airflow wheel built directly into the base of the pod. Turn it to close the airflow down for a tight, cigarette-style MTL draw that suits nic salts, or open it up for a more relaxed pull. You can adjust it any time to match your mood or your juice.

Designed for MTL Vaping

These pods are tuned for MTL, the tighter draw where vapour goes to the mouth first and then the lungs, much like a cigarette. It gives a satisfying throat hit and pairs well with nic salts at mid to higher strengths, which makes it a sensible setup for ex-smokers and anyone who prefers a focused draw over big clouds.

How to Set Up the Uwell Caliburn G2 Replacement Pods

Quick job once you have a coil to hand.

1. Push a fresh Caliburn G/G2 coil firmly into the base of the pod until it clicks flush.

2. Snap the black mouthpiece off the top of the pod to expose the red fill valve.

3. Push your e-liquid bottle tip through the red valve and add your nic salt or 50/50 e-liquid up to the 2ml line, then snap the mouthpiece back on securely.

4. Stand the pod upright for five to ten minutes so the thick cotton inside the coil completely saturates. Firing a dry coil will instantly ruin it.

5. Click the pod into your Caliburn device until it seats.

6. Use the red wheel on the base of the pod to set the airflow to suit your style, tighter for MTL.

7. Take a few gentle draws to start. The first couple may be light before the flavour settles in.

What's in the Uwell Caliburn G2 Replacement Pods Box

Each pack contains two refillable 2ml Caliburn G2 pods. No e-liquid is included, and importantly no coil, since the Caliburn G2 uses a separate plug-and-play coil that you buy alongside the pods. If you are restocking, grab a pack of coils at the same time so you are ready to go.

Made for the Uwell Caliburn G2 Series

These pods are built specifically for the Uwell Caliburn G2, the Caliburn GK2, and the Caliburn Tenet series.

They will not fit other Caliburn models. The original Caliburn G uses different pods (even though they share coils). The A-series devices (like the A2 and A3S) also use completely different pods.

Always match the pod to your exact device. If you are looking at a fresh setup rather than a spare, the MTL vape kits range is a good starting point.

About Uwell

Uwell is one of the most trusted names in MTL pod vaping, and the Caliburn line is the reason why. The G and G2 earned their reputation on clean flavour, a comfortable draw, and the kind of simple, reliable engineering that keeps people coming back.

The plug-and-play coil system is a big part of that appeal, turning coil changes from a chore into a two-second job. For a lot of UK vapers, a Caliburn is the device they recommend to friends making the switch, and Pirate Vapes keeps the genuine pods in stock to match.

Stock Up and Save

Because the coil is replaceable, the running cost here is low, mostly coils and juice rather than whole new pods. Keep a pack of pods, a pack of coils, and a bottle of 20mg Nic Salts on hand, and you are set for a good while.

Every order from Pirate Vapes ships same day when placed before 4 pm, packed to arrive safely. All stock is TPD compliant, checkout is age-verified, and sales are strictly over-18s only.

Conclusion

The Caliburn G2 pods are a low-cost, low-fuss way to keep your kit performing: refillable 2ml pods with a top fill, adjustable airflow, and a plug-and-play coil that swaps in seconds.

Just remember the coils are bought separately, so pick some up if you are running low. For coils, juice, and spares to go alongside, browse the Vape Accessories selection, or head to the Pirate Vapes homepage.

FAQs

Do Caliburn G2 pods come with a coil?

No. The Caliburn G2 uses a separate plug-and-play coil, so you will need Caliburn G2 coils alongside the pods if you do not have spares.

Which devices do Caliburn G2 pods fit?

The Uwell Caliburn G2, the Caliburn GK2, and the Caliburn Tenet. They will not fit the original Caliburn G, the Caliburn A2, A3S, or the original Caliburn.

How do I fill Caliburn G2 pods?

From the top. Snap the black mouthpiece off the pod, push your e-liquid bottle tip through the red fill valve, add your e-liquid to the 2ml line, and snap the mouthpiece back on. No need to remove the pod from the device.

What e-liquid works best with Caliburn G2 pods?

50/50 blends and high-PG nic salts. The coils are made for thinner liquid, so avoid thick high-VG shortfills, which can cause dry hits.

How long does a Caliburn G2 pod last?

The pod can last several weeks if you look after it and swap the coil regularly. Replace the pod itself once it starts to leak, crack, or discolour.

Can I change how tight the Caliburn G2 pod’s draw is?

Yes. The adjustable airflow lets you tighten it for a snug MTL draw or open it slightly for a looser pull, any time you like.