Uwell Caliburn G3 Pod Vape Kit

Uwell Caliburn G3 Pod Vape Kit

A 900mAh battery, 25W of adjustable power, and a small OLED screen that tells you exactly where you stand. The Uwell Caliburn G3 vape kit is the biggest step the Caliburn G series has taken, built for vapers who want tight MTL and looser RDL draws from one pocket device. 

It runs integrated-coil pods in 0.6ohm and 0.9ohm, holds the UK limit of 2ml, and charges over USB-C. Three firing modes and a dual airflow system let you set the draw your way. Pirate Vapes stocks the G3 across its Refillable Pod Kits and MTL Vape Kits range.

Why vapers choose this kit:

• The OLED screen ends the guesswork, showing live wattage, battery level and the resistance of the pod you have fitted, so you are never firing blind or wondering how much charge is left before you leave the house.

• Two draw styles from one device: the 0.6ohm for looser RDL, the 0.9ohm for tight MTL.

• Integrated-coil pods mean there is no separate coil to buy or seat, just fill and click.

• USB-C at 2A tops the battery up quickly.

• Three firing modes let you fire on the button, on the draw, or both, which is rare at this size.

Uwell Caliburn G3 Features

OLED Screen

The G3 is the first Caliburn in the G line to carry an OLED display, and it earns its place. Wattage, battery percentage, and coil resistance sit right there on the body. You dial the power between 5W and 25W and watch it change, rather than counting button clicks and hoping.

MTL & RDL Airflow

Both, depending on the pod. Drop in the 0.9ohm for a tight mouth-to-lung pull that suits Nic Salts at 10mg or 20mg. Switch to the 0.6ohm, and the draw opens up into a warmer, restricted lung hit with more vapour. One device covers two very different moods.

Built-In Mesh Coils

Each Caliburn G3 pod has its mesh coil built in, so there is no coil to thread or press into place. When the flavour fades, the whole pod comes out and a fresh one clicks in. It pairs cleanly with 50/50 or higher-PG liquid such as these 50/50 E-Liquids, which wick through the mesh without dry hits.

Fast USB-C Charging

The USB-C port supports 2A charging, so a flat 900mAh battery does not keep you waiting long. For a device this slim, that is a genuinely useful amount of power, and it comfortably covers a day of light to moderate vaping between charges.

Three Firing Modes

Pick the firing style that suits you by clicking the button twice to cycle through the modes. You can select Button-Only mode, Auto-Draw-Only mode (which acts as a trigger lock to stop the button firing accidentally in your pocket), or Auto-Both if you want either to work. It is a smart level of control that is rare at this size.

Uwell Caliburn G3 Pod Kit Colours

Eleven finishes, all on the same aluminium alloy body. The pick is down to taste.

#buttons

• Black
• Blue
• Cobalt Blue
• Green
• Grey
• Mauve Violet
• Midnight Gold
• Pastel Pink
• Red
• Serene Lake
• Silver

How to Set Up the Caliburn G3

First run takes a couple of minutes, most of it waiting for the pod to soak.

1. Charge the device fully over USB-C. The OLED shows the battery climbing and settles when it is done.

2. Choose your pod: the 0.9ohm for tight MTL, the 0.6ohm for a looser RDL draw.

3. Pull the pod out of the battery to reveal the silicone stopper on the side of the pod. Open it, fill up to the 2ml line, then seal it firmly.

4. Click the pod onto the magnetic base and let it stand upright for five to ten minutes so the internal cotton soaks right through before the first pull. Rushing this will instantly burn the coil.

5. Set your airflow. Pull the pod out, rotate it 180 degrees, and drop it back in to switch between a tighter or looser draw.

6. Click the button 5 times to turn the device on. Use the button to set your wattage and preferred firing mode (Button, Auto-Draw, or Both).

7. Start on a lower wattage and creep up until the flavour sits where you like it.

What's in the Caliburn G3 Box

• One Caliburn G3 device,

• one 0.6ohm pod and one 0.9ohm pod (both with integrated mesh coils and child-resistant closures),

• a USB-C charging cable,

• a lanyard,

• and a user manual.

No e-liquid is included, so add a 50/50 bottle or a nic salt to get going.

Pods and Coils for the Caliburn G3

The kit runs on Caliburn G3 pods only. These are the integrated-coil cartridges in 0.6ohm and 0.9ohm, and when a coil tires, you replace the whole pod rather than the coil inside. Keep a couple of spare Replacement Pods on hand so you are never caught short.

What does not fit: the older Caliburn G and G2 pods, and the A-series pods, all use different platforms and will not seat on the G3. If you are moving up from an earlier Caliburn, browse the wider Uwell Vape Range to line up the right pods first.

About Uwell

The Caliburn line is where Uwell made its name, and the G3 is the generational jump. Earlier models kept things simple with a fixed draw and no screen. The G3 adds an OLED display, a choice of firing modes, a 25W ceiling and, for the first time in the G series, a 0.6ohm pod for restricted lung vaping.

Uwell's Pro-FOCS flavour approach still sits underneath it all, tuning the mesh for a fuller taste. It is a considered upgrade rather than a facelift, which is why the Caliburn keeps its following in the UK.

Stock Up and Save

Starting fresh with the G3 is easy: the kit gives you both pods, a cable and a lanyard, so all you add is a bottle of liquid and a set of spare pods for when the first two fade. Pirate Vapes dispatches every order the same day when it is placed before 4 pm.

All stock is TPD compliant, the pods carry child-resistant closures, checkout is age-verified, and sales are strictly over-18s only. Free Pirate Post applies on orders over £40.

Conclusion

The Caliburn G3 is one of the more capable pod kits you can slip in a pocket. A 900mAh battery, 25W, an OLED screen and two pod resistances give you real control over MTL and RDL vaping without stepping up to a full mod.

Pair it with a 50/50 liquid or a nic salt, and it settles in fast. Browse more Vape Accessories or head back to Pirate Vapes to finish your order.

FAQs

Is the G3 good for beginners?

Yes, though it suits improvers best. The Auto Draw mode makes it beginner-friendly, and the OLED screen keeps the settings clear as you find your feet.

Does the Caliburn G3 do MTL or RDL?

Both. The 0.9ohm pod handles tight MTL and the 0.6ohm pod opens up for a looser RDL draw.

Can I use nic salts in the Caliburn G3?

Yes, and the 0.9ohm pod is ideal for them. 50/50 salts at 10mg or 20mg give a smooth, tight hit.

How long does a Caliburn G3 pod last?

Usually around five to seven days with moderate use, though sweeter liquids clog the mesh faster. When the taste dulls, swap the pod.

What liquid should I avoid in the Caliburn G3?

Thick high-VG blends like 70/30. The mesh and 2ml pod are built for 50/50 or higher-PG liquid, so anything thicker risks dry hits.

How do I fill the Caliburn G3 pod?

Pull the pod out of the device to expose the silicone stopper on the side. Open the stopper, add your liquid to the 2ml line, and seal it firmly. Always leave a new pod to soak for five to ten minutes before the first draw.