Uwell Caliburn G3 Replacement Pods

Uwell Caliburn G3 Replacement Pods

Keeping a Uwell Caliburn G3 running comes down to one thing: fresh pods. This pack of four Replacement Pods carries a built-in mesh coil inside every 2ml cartridge, so there are no separate coils to fit.

Stocked in 0.4ohm, 0.6ohm, 0.9ohm and 1.2ohm, the Uwell Caliburn G3 replacement pods cover both a tighter MTL draw and an airier RDTL draw from one pod line. Uwell's Pro-FOCS flavour technology and U2 anti-leak channel keep the taste clean and the liquid where it should be, which makes these an easy restock for any Caliburn owner.

Why vapers choose this:

• One pod line, four draws. The 0.4ohm and 0.6ohm pods run warmer RDTL vapour, while the 0.9ohm and 1.2ohm pods tighten things up for a cigarette-style MTL pull, so the same pack suits almost any Caliburn setup.

• No coil fiddling. The mesh coil is built in.

• U2 anti-leak channel and ultrasonic-welded build keep liquid contained during everyday carry.

• Pack of four means spares in the drawer.

• Pro-FOCS flavour tech holds the taste steady from a full pod down to the last few draws.

Uwell Caliburn G3 Replacement Pods Features

Pro-FOCS Mesh Technology

Each pod uses a built-in mesh coil paired with Uwell's Pro-FOCS flavour system. The mesh heats evenly across a wide surface, which is what gives these pods their clean, full taste. In day-to-day use, it means the flavour you get on puff fifty is close to the one you got on puff one, rather than dropping off early.

U2 Anti-Leak Design

Leaky pods are the quickest way to ruin a good day. Uwell's U2 anti-leak design uses ultrasonic welding and a U-shaped channel to trap e-liquid at the base of the pod, so it stays put in a pocket or bag. Uwell rates the improvement in leak resistance at up to 150% over the older design.

Built-In Mesh Coil

There are no loose coils to screw in here. The coil sits integrated inside each 2ml pod, so when it wears out you simply drop in a fresh cartridge from the refills and pods range. It keeps maintenance to almost nothing, which is a big part of why the Caliburn line stays popular.

Multiple Resistance Options

Run the lower-resistance 0.4ohm and 0.6ohm pods with freebase e-liquid for warmer RDTL clouds, and save the 0.9ohm and 1.2ohm pods for Nic Salts where a tighter MTL draw suits higher strengths. One pack lets you switch between the two whenever you fancy a change.

Magnetic Pod Connection

The magnetic connection lets the pod click on and off in a second, with no plugs or threads to line up. Handy when you want to jump between a fruit in one resistance and a menthol salt in another without any mess.

Uwell Caliburn G3 Replacement Pods Resistance Options

The pack is sold by resistance, so you choose the draw that matches how you vape. Here is how the four stocked options break down, most versatile first.

The 0.6ohm pod is the popular middle ground. It gives a warm, restricted lung draw with strong flavour and works well with freebase liquid at higher settings. Step up to the 0.4ohm if you want the loosest, most vapour-heavy draw of the four.

For a tighter, cigarette-like pull, the 0.9ohm pod is the go-to. It runs cooler, sips less liquid and pairs neatly with 10mg or 20mg nic salt. The 1.2ohm pod tightens the draw further still and keeps things cool, which suits higher-strength salts and lighter throat hits.

#buttons

• 0.4 Ohm
• 0.6 Ohm
• 0.9 Ohm
• 1.2 Ohm

How to Set Up the Uwell Caliburn G3 Pods

Quick job. Under two minutes.

1. Pull the empty pod straight off the magnetic base.

2. Push the black plastic mouthpiece laterally to snap it off the clear pod body, exposing the red top-fill port.

3. Fill with 50/50 e-liquid or nic salt up to the 2ml line through the red port, then snap the mouthpiece firmly back into place. (Do not put liquid down the central airflow tube).

4. Click the pod back onto the device's magnetic base.

5. Stand it upright and let it stand for five to ten minutes so the internal cotton soaks liquid all the way through. Firing a dry coil will instantly ruin it.

6. Start at a low wattage on your device and build up gradually until you reach your preferred warmth.

What's in the Uwell Caliburn G3 Pods Pack

Each pack contains four Uwell Caliburn G3 pods in your chosen resistance, every one with a built-in mesh coil ready to fill. There is no device, no loose coils, and no e-liquid in the box, so keep a bottle and a compatible Caliburn on hand.

Made to Fit the Whole Caliburn G3 and G4 Family

These pods are the universal refill for the entire Caliburn G3 and G4 ecosystems. They fit the Caliburn G3, Caliburn G3 Lite, Caliburn G3 Pro, Caliburn GK3, Caliburn GK3 Tenet, as well as the newer Caliburn G4, G4 Mini, and G4 Pro. One pack covers the most current Caliburn devices you will find across the Uwell range.

What they will not fit is the older Caliburn G2 or original Caliburn G, which use a different pod shape, nor the A-series kits (like the A3 or AK3). If you are unsure which pod your device takes, check the model printed on your battery before ordering.

About Uwell

Uwell made its name on the Caliburn line, and the G3 pod system is where a lot of that reputation sits. The focus with these pods is refined MTL performance and leak control rather than big-cloud chasing, which is why they pair so well with the compact, pocket-friendly kits in our MTL Vape Kits selection.

The Pro-FOCS coil tech and U2 anti-leak channel are the two features Uwell keeps refining across the range, and both carry through to this pod. For everyday refillers who want dependable pods without fuss, it is a safe pick.

Stock Up and Save

Every pack sold by Pirate Vapes is TPD compliant with a 2ml capacity, MHRA-notified and shipped through an age-verified checkout for over-18s only.

Since disposables were banned across the UK in June 2025, refillable pods like these are the sensible way to keep a reliable device going. Set a Caliburn refill on The Crow's Nest subscription and your spares turn up without you having to think about it.

Conclusion

The Uwell Caliburn G3 pods are a straightforward, good-value restock for anyone already running a Caliburn G3 or G4 device. With four resistances covering MTL and RDTL, a built-in mesh coil and solid leak protection, they cover most everyday needs in a single pack of four.

Grab a bottle of liquid and any Vape Accessories you need to go with them, with same-day dispatch on weekday orders placed before 4 pm when you shop at Pirate Vapes.

FAQs

What resistances do the G3 pods come in?

Four: 0.4ohm, 0.6ohm, 0.9ohm and 1.2ohm. Lower ohms suit RDTL and freebase; higher ohms suit MTL and nic salts.

Are the G3 pods refillable?

Yes. Each 2ml pod has an integrated mesh coil and refills through the fill port.

Will the G3 pods fit a Caliburn G2?

No. The G2 uses a different pod. These are for the G3 and G4 series, including Lite, Pro, GK3 and Mini.

Which G3 pod is best for nic salts?

The 0.9ohm and 1.2ohm pods give the tighter MTL draw that pairs well with 10mg and 20mg salts.

How long does a G3 pod last?

Most vapers get around 7 to 10 days per pod, depending on how often you vape and which liquid you use.

Are the G3 pods TPD compliant?

Yes. They hold 2ml, are MHRA-notified and ship age-verified to over-18s only.