Uwell Crown M Pod Kit

Uwell Crown M Pod Kit

The Uwell Crown M Pod Kit is a refillable pod mod powered by a 1000mAh built-in battery, with output adjusted from 5W to 35W. A twin coil is carried by its 2ml pod, and the resistance is switched between 0.8Ω and 0.4Ω on the device.

A spare 0.6Ω coil is supplied in the box as a third option, and worn pods or coils are replaced as needed. Four colours are offered, with recharging handled over USB-C. Within the Refillable Pod Kits range, this is one that changes draw without a coil swap.

What to Know About the Uwell Crown M Pod Kit

• Recharges over USB-C from a 1000mAh internal cell
• 5W to 35W adjustable output
• 2ml refillable pod
• 0.8Ω and 0.4Ω switchable twin coil, plus a spare 0.6Ω coil
• Takes Crown M pods and coils only

Features of Uwell Crown M Pod Kit

Its coil, its power range, and a see-through body define the Crown M. Each feature below changes how the kit is set up or how it vapes day to day.

Switchable Twin Coil

Single-coil mode fires half of the twin coil, giving 0.8Ω and a mouth-to-lung style draw at 15W to 18W. Dual-coil mode fires both sections, giving 0.4Ω and a looser direct-to-lung pull at 30W to 35W. The change is made on the device, so no coil has to be removed.

1000mAh Battery

Inside the body, a 1000mAh cell supplies the power and refills through USB-C, with 2A fast charging supported. Compact as the kit is, that capacity is generous for a pod mod. Running at the 35W ceiling drains it quicker than low settings do.

5W to 35W Scroll Wheel

A mechanical scroll wheel on top of the kit moves output across 5W to 35W. Each coil has its own range: 15W to 18W for the 0.8Ω mode, 30W to 35W for 0.4Ω, and 20W to 23W for the spare 0.6Ω coil. Begin low within the range for the coil in use, then edge the wattage upward towards the Crown M 35W ceiling.

Adjustable Airflow Slider

Airflow is opened or tightened with a slider on the body, so the draw can be changed without removing the pod. Combined with the coil choice, a wide spread of draw styles is covered by one device. No tools are needed.

Transparent Shell

A clear shell exposes the inner circuit board of the Crown M. Because the pod is transparent too, the e-liquid level and the state of the coil can be checked at a glance. Spotting a nearly empty pod early prevents the coil from burning.

Uwell Crown M Pod Kit Colours

Pirate Vapes stocks the kit in four colours, all with the same battery, pod and coil setup.

#buttons

• Black
• Blue
• Brown
• Orange

Uwell Crown M Pod Kit Coil Options

Three coil settings are supplied with the kit, and the right one depends on the draw wanted. Each is matched to a different wattage range and a different kind of e-liquid.

The 0.8Ω setting is the tightest of the three and is held to 15W to 18W. Nic Salts and 50/50 liquids suit it, with the airflow slider closed down for a tight inhale.

Thicker liquids belong with the 0.4Ω setting at 30W to 35W, where a high-VG blend, a 70/30 Shortfill for instance, keeps pace with the coil. The spare 0.6Ω coil, rated for 20W to 23W, sits between the two and gives a restricted lung draw.

How to Set Up the Uwell Crown M Pod Kit

Setup takes a charge, a fill, and a short wait for the coil.

Step 1: Before first use, plug in the cable from the box to charge the device, and peel off the film covering the pod and coil base.

Step 2: Dock the pod on the device, where it is held magnetically at the base, then open the top fill port.

Step 3: Pour in e-liquid to the marked line, avoiding the central tube, then press the silicone plug back in.

Step 4: Leave the pod for a moment so the coil can absorb the liquid, because a dry coil burns on the first draw.

Step 5: Choose the single or dual coil setting on the device, then set the wattage low. It is raised gradually to suit the e-liquid.

Step 6: Open or close the airflow slider to taste and vape.

What's in the Uwell Crown M Pod Kit Box

The parts needed to start are included once a bottle of e-liquid has been added.

• Uwell Crown M device
• Crown M 2ml empty pod
• 0.8Ω and 0.4Ω Crown M twin coil (pre-installed)
• 0.6Ω Crown M coil (spare)
• USB-C charging cable
• User manual

E-liquid is not included, so a bottle has to be bought separately.

Pods and Coils Compatible With the Uwell Crown M Pod Kit

Only Crown M pods and Crown M coils are used by this kit. Spares should be matched to the Crown M by name, and both the twin coil and the 0.6Ω coil are sold as Crown M parts.

Pods and coils made for other Crown products are separate designs. The Crown X kit and the Crown IV and Crown V tanks are covered by that, since no parts are shared with the Crown M. More Uwell hardware is listed in the Uwell Vapes range.

About Uwell and the Crown Range

The Crown name has been used by Uwell on more than one type of product, from sub-ohm tanks to pod devices. The Crown M sits on the pod side of that family. A transparent shell is paired with a twin coil and a power wheel, and the whole device is kept compact enough for a coat pocket.

For the kit, the useful detail is the coil rather than the badge. One twin coil covers two resistances, and a second coil is added in the box, so a buyer can try several draw styles before settling on one.

Stock Up on the Crown M Pod Kit

Nothing in the box fills the pod, so a bottle of e-liquid is the first extra for the basket. Spare Crown M coils are worth keeping to hand as well.

Weekday orders for the Uwell Crown M UK stock that reach Pirate Vapes before 3:30 pm are dispatched on Tracked 24 that day. Orders landing on a Saturday, Sunday or bank holiday leave on the following working day. A basket built from Multi-Buy Vapes adds savings across several items.

Conclusion

The Crown M kit suits adults who want adjustable power and a coil that switches between two resistances, all in a compact refillable device. Thin liquids pair with the lower resistance, while thicker blends pair with the higher-power setting.

Chargers, cases and spare parts are collected under Vape Accessories at Pirate Vapes. Checkout is age-verified, and the kit cannot be sold to anyone under 18.

FAQs

What coils does the Uwell Crown M Pod Kit use?

The kit uses a Crown M twin coil that runs at 0.8Ω on one coil and 0.4Ω with both coils active. A spare 0.6Ω Crown M coil is also supplied for a third resistance.

How much e-liquid does the Uwell Crown M Pod Kit hold?

The pod holds 2ml, which is the maximum capacity allowed for a refillable pod on the UK market. Refilling is needed more often at 35W than at lower settings.

What is the output range of the Uwell Crown M vape?

Output can be set anywhere between 5W and 35W using the scroll wheel. The 0.8Ω mode sits at 15W to 18W, the 0.4Ω mode at 30W to 35W, and the 0.6Ω coil at 20W to 23W.

Which e-liquid works best in the Crown M kit?

Low-VG liquids, nic salts included, match the 0.8Ω setting. Thicker, higher-VG blends belong on the 0.4Ω setting, since that coil moves more liquid through the cotton.

How is the Uwell Crown M Pod Kit charged?

Recharging takes place over USB-C, which supports 2A fast charging, and the cable comes in the box. The 1000mAh cell stays sealed inside the body.

Which colours does the Uwell Crown M Pod Kit come in?

Four colours are offered: Black, Blue, Brown, and Orange. The battery, pod, and coil setup is the same in every colour.