Uwell Crown V Replacement Coils

Uwell Crown V Replacement Coils 

Three resistances, one tank, and a coil built around Uwell's Pro-FOCS flavour tech rather than raw cloud output. The Uwell Crown V Replacement Coils are the UN2 mesh series made specifically for the Uwell Crown 5 sub-ohm tank, sold in packs of four.

Choose from a 0.23 ohm single mesh coil for a smooth DTL pull, a 0.3 ohm dual mesh coil for a cooler restricted draw, or a 0.2 ohm triple mesh coil for maximum vapour. All three press into the same base, so switching between them doesn't mean switching tanks. Browse the full range of Uwell Coils at Pirate Vapes.

Why vapers choose this:

• Three resistances, one tank. All three UN2 coils fit the same Crown 5 base, so you can switch between a smoother DTL pull and an airier RDL draw without buying a different tank.

• Mesh coils built for flavour. Pro-FOCS technology pairs with the mesh design to pull more flavour from each e-liquid rather than just chasing bigger clouds.

• Press-fit installation. No threading required; the coil simply pushes into the base until it seats.

• Pack of four covers roughly a month of regular use, so there's no reordering after every second refill.

• Genuine Uwell part, matched exactly to the Crown 5 tank rather than a compatible-but-different substitute.

Uwell Crown V Coils Features

Mesh Heating for Better Flavour

Pro-FOCS tech runs alongside the mesh element to manage temperature more precisely than a standard coil, so flavour comes through cleaner instead of getting lost in vapour production. It's part of why the Crown 5 line built a following among flavour-focused DTL vapers rather than pure cloud chasers.

Three Coils for Different Draws

The 0.23 ohm single mesh gives the smoothest DTL pull at 65–70W. The 0.3 ohm dual mesh runs cooler and airier at 50–55W for more of a restricted DTL feel. The 0.2 ohm triple mesh pushes the most surface area for maximum vapour, also at 65–70W. Same tank, three distinct experiences.

Designed for High-VG E-Liquid

These coils need a steady feed of thicker e-liquid to keep pace with the heat they generate. Run High VG E-Liquid or shortfills rather than nic salts, and expect to refill more often at the higher end of the wattage range.

Easy Press-Fit Replacement

Pull the old coil straight out and press the new one into the base. There's no threading to line up, which matters when you're swapping mid-session rather than at a workbench.

Uwell Crown V Coils Resistance Options

Pirate Vapes stocks all three UN2 coils that Uwell makes for the Crown 5 tank, so you can match the resistance to how you actually vape rather than settling for whatever shipped in the box.

#buttons

• 0.2 Ohm UN2-3 Triple Mesh
• 0.23 Ohm UN2 Single Mesh
• 0.3 Ohm UN2-2 Dual Mesh

How to Set Up the Uwell Crown V Coils

Quick swap, done at the tank rather than the device.

1. Unscrew the airflow base at the bottom of the tank to access the chamber.

2. Pull the used coil straight out and firmly push the new UN2 coil into the base until it is fully seated.

3. Screw the base back onto the tank.

4. Fill the tank through the top fill port with your chosen e-liquid, keeping to high VG or shortfill juice.

5. Let the tank sit for 10 to 15 minutes before vaping to allow the cotton wick to fully saturate and prevent dry hits.

6. Check that the airflow ring is set to your preference, start at the lower end of the coil's rated wattage, and increase gradually.

What's in the Uwell Crown V Coils Box

Each pack contains four UN2 mesh coils in your chosen resistance: 0.23 ohm single mesh, 0.3 ohm dual mesh, or 0.2 ohm triple mesh. There's no tank, no mod and no e-liquid included, so this is a coil-only reorder for existing Crown 5 owners rather than a starter purchase.

Built Exclusively for the Uwell Crown 5 Tank

These UN2 coils are a confirmed fit for the Uwell Crown 5 (Crown V) sub-ohm tank, including both the standard and CRC versions. They are not interchangeable with earlier Crown tanks: Crown 3 and Crown 4 use different coil series entirely, so a UN2 coil will not seat properly in an older base.

If you're shopping for the tank itself rather than a replacement coil, browse the full range of DTL Tanks at Pirate Vapes.

About Uwell

Uwell has built the Crown series into one of the longest-running sub-ohm tank lines still in production, with each generation refining the mesh coil rather than reinventing the tank from scratch.

The Crown 5 introduced the UN2 coil series and Pro-FOCS flavour tech, a shift toward flavour accuracy that earlier Crown generations didn't prioritise as heavily. It's part of why Crown 5 owners tend to stick with the tank rather than switching to a newer model every time Uwell releases one.

Stock Up and Save

If you haven't settled on a favourite resistance yet, it's worth picking up two different options in the same order rather than committing to one and reordering later.

Pirate Vapes dispatches coil orders the same day when placed before 4 pm, so a swap doesn't mean days without your tank. Age-verified checkout, TPD-compliant stock, over-18s only.

Conclusion

The Uwell Crown V Replacement Coils give existing Crown 5 owners a straightforward way to keep the tank running without hunting for a universal substitute that might not seat properly. Three resistances covering everything from a tight, flavour-forward DTL pull to maximum vapour output mean there's a genuine reason to try more than one rather than sticking with whatever came in the box.

They're coil-only, so make sure your Crown 5 tank and e-liquid are already sorted before ordering. Browse the full Vape Accessories range at Pirate Vapes if you need anything else to go with it.

FAQs

What resistances are available for the Uwell Crown V coils?

0.2 ohm, 0.23 ohm, and 0.3 ohm. All three are stocked, covering single, dual, and triple mesh coil structures for different draws.

How many coils come in the pack?

Four. Enough for roughly a month of regular DTL vaping before the flavour starts to drop off.

Are these coils compatible with the Uwell Crown 3 or Crown 4?

No. The UN2 coil series is built specifically for the Crown 5 (Crown V) tank. Earlier Crown generations use different coil series that won't fit this base.

Which resistance should I choose?

The 0.23 ohm single mesh is the most popular for a smooth, flavour-forward DTL draw. The 0.3 ohm suits a cooler, more restricted pull, and the 0.2 ohm pushes the most vapour.

What wattage should I run these at?

65–70W for the 0.23 ohm and 0.2 ohm coils, and 50–55W for the 0.3 ohm. Start at the lower end and adjust from there.

Do these coils work with nic salts?

Not well. They're built for high VG e-liquid and shortfills at sub-ohm wattages, which will taste harsh with most nic salts. Stick to high VG juice for the best results.