Uwell Valyrian Pod Replacement Coils - Pack Of 4

Uwell Valyrian Pod Replacement Coil

Two resistances, four coils to a pack, and one purpose: keeping a Uwell Valyrian Pod running without replacing the whole pod each time the flavour starts to fade. You get either the 1.0ohm for a tight MTL draw or the 0.6ohm for a warmer restricted DTL pull. Both are FeCrAl with a dual-coil build, both push-fit into the base of the pod, and both take 50/50 e-liquid or nic salts without fuss.

Made for the Valyrian Pod Kit and the Valyrian SE. If your kit is a refillable pod and the coil reads Valyrian, start here. More Uwell Coils sit alongside the wider Refillable Pod Kits range.

Why vapers choose these coils:

• Two draws from one pod. Keep the 1.0ohm loaded for a cigarette-style MTL pull, or drop in the 0.6ohm when you want more warmth and vapour, all in the pod you already own.

• Push-fit, not threaded. The coil seats into the base with a firm press, so a change takes seconds and there is nothing to cross-thread.

• FeCrAl build. Quick to heat, steady once it gets there, forgiving with both freebase and salt nicotine.

• Four to a pack. Enough to keep a daily kit going for weeks before a reorder.

• Built for the pod, not adapted to it. Uwell designed these around the Valyrian Pod platform, so wicking and airflow are matched to the pod rather than approximated.

Uwell Valyrian Pod Coil Features

Two Resistances, Two Completely Different Vapes

The 1.0ohm runs an MTL draw at roughly 8-15W, tight and cool, close to a cigarette pull. The 0.6ohm opens things up to a restricted DTL draw at 18-25W, warmer and cloudier. Same pod, same fill, genuinely different vape depending on which coil is in.

Why Push-Fit Beats Threaded Here

No screwing, no alignment, no coil binding halfway in. You pull the spent coil out of the base and press a fresh one home until it clicks. Honestly, on a small pod you carry around all day, that speed matters more than people expect.

That FeCrAl Wire, Though

FeCrAl heats fast and holds a stable resistance, which suits the fixed output of a pod kit. It plays nicely with Nic Salts as well: run them at 10-20mg through the 1.0ohm, and you get a smooth, steady hit without the coil struggling.

Match the Liquid to the Coil

Both coils wick best with thinner juice. Stick to 50/50 E-Liquids or higher-PG blends and the wick keeps up. Thick high-VG liquid will not pull through fast enough at these resistances, and you will taste it as a dry, harsh draw within a few pulls.

One Job, Done Properly

This is a single-purpose part. It is not a sub-ohm cloud monster or a rebuildable deck. It keeps a Valyrian Pod producing clean flavour at low power, reliably, day after day. For a refillable pod you actually use every day, that is the whole point.

Uwell Valyrian Pod Coil Resistance Options

Two coils in the pod, and the right one comes down to how you like to draw.

Most reach for the 1.0ohm. It runs an MTL draw at 8-15W, tight and discreet, and it is the natural match for anyone off cigarettes running nic salts at 10-20mg. If you want a vape that feels like a cigarette and stretches out, this is the one to keep loaded.

The 0.6ohm is the airier pick. A restricted DTL draw at 18-25W, warmer, with noticeably more vapour. It pairs better with lower-strength salts or 50/50 freebase, since more power over strong nicotine tends to feel harsh. Worth trying once you have moved past the tight cigarette-style pull.

#buttons

• 0.6 Ohm 
• 1.0 Ohm

How to Set Up the Uwell Valyrian Pod Coil

Quick swap. Under a minute once you have done it once.

1. Pull the used coil straight out of the bottom of the pod. It lifts out, no tools needed.

2. Take a fresh coil and drip three or four drops of e-liquid directly onto the exposed cotton ports.

3. Push the new coil firmly into the base until it seats fully. A small click tells you it is home.

4. Refill the pod with your 50/50 or salt e-liquid through the fill port and seal it.

5. Let the filled pod stand upright for a solid five minutes so the cotton soaks through before its first fire. Skip this and the coil burns on day one.

6. Reinsert the pod, take two or three gentle pulls without firing, then start vaping and build up from there.

What's in the Uwell Valyrian Pod Coil Box

Four replacement coils in the resistance you select. That is it: no pod, no device, no e-liquid in the pack. If your current pod is worn or cracked, Pirate Vapes stocks the matching Replacement Pods separately, so you can freshen up the whole thing at once.

The Coil Built for the Valyrian Pod Family

These coils fit the Valyrian Pod Kit and the Valyrian SE Pod System, plus the Valyrian Pod refillable cartridge. Same coil, same fit across all three. The wider Uwell Range has the kits and spare pods if you need them.

The Valyrian sub-ohm tanks are a different platform entirely. Not the original Valyrian tank. Not the Valyrian 2 or 2 Pro. Not the Valyrian 3. Those run their own UN2 coil heads, so a 0.6ohm or 1.0ohm pod coil will not seat or fire in any of them. If the part in your hand came out of the bottom of a small refillable pod, you are in the right place.

About Uwell

Uwell built its name on flavour. The Caliburn made them a household name in pod kits, but the Valyrian line proved they could do power and cloud just as well. Valyrian started as a big sub-ohm tank series, then branched into this smaller refillable pod aimed at MTL and restricted DTL vapers.

These coils are the part that keeps that pod honest. Uwell tends to tune its coils around taste rather than raw wattage, and on a low-power pod like this, that focus is exactly what you want.

Stock Up and Save

A single coil in a daily pod lasts a week or two, sometimes longer with lighter use. A pack of four covers most of a month, so grabbing a couple of packs keeps you off the reorder treadmill.

Every order from Pirate Vapes ships same day before 4 pm, with Free Pirate Post over £40. Checkout is age-verified, over-18s only, and the Valyrian pods these coils feed are 2ml TPD.

Conclusion

The Valyrian Pod coils do one thing and do it cleanly: keep a Uwell Valyrian Pod Kit or SE running for a fraction of the cost of new pods.

Choose the 1.0ohm for a tight cigarette-style MTL vape, the 0.6ohm for something warmer and airier, and keep a pack of four on hand either way. Browse the full Vape Accessories collection and the rest of the range at Pirate Vapes.

FAQs

Which devices do the Valyrian Pod coils fit?

The Valyrian Pod Kit, the Valyrian SE Pod System, and the Valyrian Pod cartridge. They do not fit any of the Valyrian sub-ohm tanks.

Should I choose the Valyrian Pod coils 0.6ohm or 1.0ohm resistance?

Down to your draw. The 1.0ohm is a tight MTL vape for salts and a cigarette-style pull. The 0.6ohm is warmer and airier, a restricted DTL draw better suited to lower-strength liquid.

How long does one Valyrian Pod coil last?

Usually a week or two on daily use. Sweeter, darker e-liquids gunk a coil faster, so a heavy dessert flavour will cut that short.

Can I use nic salts with the Valyrian Pod coils?

Yes, and the 1.0ohm in particular is built for it. Run salts at 10-20mg for a smooth MTL hit. Freebase 50/50 works fine in both resistances too.

Do I need to prime the Valyrian Pod coils?

Always. Drip a few drops onto the cotton, fill the pod, then leave it five minutes before the first pull. A dry coil burns instantly, and there is no coming back from that.

Are the Valyrian Pod coils mesh?

No. Both the 0.6ohm and 1.0ohm run standard round-wire dual-coil builds rather than a mesh sheet. They are designed for steady, consistent heat at lower wattages.