Uwell Popreel P1 Pod Kit

Uwell Popreel P1 Pod Kit

No buttons, no menus, no settings. Just inhale. The Uwell Popreel P1 is a slim, draw-activated MTL pod pen built for simple everyday vaping, pairing a 400mAh battery with a 2ml refillable pod and a built-in 1.2ohm mesh coil.

At 108.2 x 22.5mm, it slips into any pocket, and the macaron-pastel shell with a clear outer layer and a side juice window makes it one of the better-looking Pod Kits at this price.

Fill it, drop the pod in, and draw. Charges over USB-C, sits firmly among easy Refillable Pod Kits for new vapers and ex-disposable users.

Why vapers choose this:

• Pure draw activation means there is nothing to learn or set. You inhale, it fires, and the tight 1.2ohm draw gives a cigarette-style MTL pull that suits anyone moving over from disposables.

• A 2ml top-fill pod refills in seconds through the mouthpiece.

• The 1.2ohm mesh coil with Pro-FOCS pulls clean, consistent flavour from nic salts.

• A clear outer shell and side window let you see your juice level at a glance.

• USB-C charging tops the small battery back up quickly, so a flat device is never a long wait.

Uwell Popreel P1 Features

Inhale and Go

There is no fire button and no screen. The P1 uses a draw-activated mechanism, so the moment you pull on the mouthpiece, it fires at a fixed 13W. That simplicity is the whole point. For anyone stepping off disposables who wants the same effortless experience in a reusable device, this is about as straightforward as vaping gets.

A Coil Built for MTL Flavour

The pod houses a 1.2ohm UN2 Meshed-H mesh coil running Uwell's Pro-FOCS flavour technology. Mesh heats evenly across a wider surface than old wire coils, so flavour comes through cleaner and lasts longer through the pod's life. Paired with the right juice, it delivers a tight, satisfying mouth-to-lung draw. Best matched with Nic Salts at 10mg or 20mg.

Refills in Seconds

Pull the mouthpiece off to reveal the fill port, top up your e-liquid, and push it back on. That is the whole process. The 2ml pod is leak-resistant with a semi-shaded window down one side, so you always know how much juice is left without holding it up to the light. A 50/50 E-Liquid or higher-PG blend wicks best through the 1.2ohm coil.

Small Battery, Fast Charging

Let's be honest about the 400mAh cell: it is small, sized for a device this slim. For light to moderate MTL use, it comfortably covers a good chunk of the day, and the USB-C port brings it back quickly when it does run down. If you are a heavy all-day vaper, keep the cable handy. For most pocket use, it does the job.

Built to Look Good

The dual-layer construction places a clear plastic outer shell over a coloured inner layer, giving those macaron pastel tones real depth. It is light, it is durable enough for daily knocks, and it genuinely does not look like a cheap throwaway. A magnetic pod connection keeps everything seated with a satisfying click.

Uwell Popreel P1 Colours

Four macaron-inspired pastel finishes, each using the clear-over-colour layered shell for a soft, glossy look.

#buttons

• Blue
• Green
• Pink
• Silver

How to Set Up the Uwell Popreel P1

Two minutes, most of it letting the coil settle.

1. Charge it first. Plug in a standard USB-C cable (not included) and bring the 400mAh battery up to full. The LED shows the charging status.

2. Open the pod. Snap the plastic mouthpiece off the pod to expose the top fill port (marked by red silicone).

3. Fill the pod. Insert your bottle nozzle into the red fill port and top up with your chosen nic salt or 50/50 e-liquid. Do not put liquid down the open central airflow tube.

4. Push the mouthpiece firmly back on until it clicks securely into place.

5. Let it rest three to four minutes. Seat the pod on the magnetic connection and leave it upright while the 1.2ohm coil wicks through. A quick soak here stops that first-pull burnt taste.

6. Just inhale. No button to press. Draw gently on the mouthpiece and the device fires on its own.

What's in the Uwell Popreel P1 Box

Inside you get:

• The Popreel P1 device with its 400mAh battery,

• one pre-installed 1.2ohm refillable pod,

• a spare mouthpiece,

• and the user manual.

Note: There is no e-liquid and no USB-C charging cable included in the box. You will need to use your own standard USB-C cable to charge it.

Made for Popreel P1 Pods

The P1 uses its own dedicated pod, so replacements are simple: when the coil inside starts to lose flavour, you swap the entire pod rather than fitting a new coil. Keep a few Replacement Pods in the drawer so you are never caught short, as they usually come in packs of four.

What will not fit: pods from other Uwell devices, including the Caliburn and Popreel N1 ranges. Each uses a different pod format, so match Popreel P1 pods to this device specifically.

About Uwell

Uwell earned its reputation on flavour, largely through the Caliburn pod range and the Pro-FOCS coil technology that runs through most of its devices. The Popreel line takes that same flavour focus and strips everything back to the essentials: a small, good-looking, draw-activated pod pen aimed at new vapers and anyone leaving disposables behind.

The P1 is one of the neatest examples, keeping Uwell's coil quality in a device that costs very little. Browse the wider Uwell Range for the rest of the lineup.

Stock Up and Save

Since the coil lives in the pod, keeping a few spare Popreel P1 pods on hand is the one thing worth doing. Setting them up on The Crow's Nest subscription means fresh pods arrive without you having to remember, and you save on every order.

Every order from Pirate Vapes ships same day before 4 pm on working days, in plain, padded packaging. All stock is TPD compliant, the checkout is age-verified, and sales are over-18s only. Free Pirate Post applies over £40.

Conclusion

The Uwell Popreel P1 is about as simple as a refillable vape gets: draw to fire, refill through the mouthpiece, replace the pod when the flavour drops. The 1.2ohm mesh coil delivers proper MTL flavour, the macaron finishes look the part, and USB-C keeps the small battery topped up.

If you want an easy, pocket-friendly step away from disposables without buttons or settings to worry about, it is a strong little kit. Explore more Vape Accessories and browse the full lineup at Pirate Vapes.

FAQs

Does the Popreel P1 have a button?

No. It is fully draw-activated, so you just inhale on the mouthpiece to fire it. There are no buttons, screens, or settings.

What e-liquid works best with the Popreel P1?

Nic salts at 10mg or 20mg, or a 50/50 freebase, suit the 1.2ohm MTL coil best. High-VG juice is too thick for this pod and will not wick properly.

How do I refill the Popreel P1?

Pull the mouthpiece off, fill through the port on top of the pod, and push it back on. The 2ml pod holds enough for a good stretch of MTL vaping.

Do I need to change the Popreel P1 coils?

No coil changes. The coil is built into the pod, so when the flavour fades, you fit a fresh Popreel P1 pod instead. They come in packs of four.

How long does the Popreel P1 battery last?

The 400mAh battery is small, sized to the slim body. Light to moderate use gets you through much of the day, and USB-C recharges it quickly.

Is the Popreel P1 good for beginners?

Yes. With no buttons and a simple top-fill pod, it is one of the easier kits to start on, especially coming from disposables.