Uwell Valyrian 2 Pro Replacement Tank

Thirty-two millimetres wide and built to run between 80 and 120W. The Valyrian 2 Pro is not a subtle tank. It uses Uwell's UN2 mesh coil series with configurations ranging from single coil through to quad, and it ships with two coils and a spare glass in the box.

PRO-FOCS flavour technology is Uwell's proprietary coil structure, designed to maximise how much flavour the mesh pulls from your e-liquid. Hinged flip cap for quick top fills. 810 widebore drip tip. 510 threaded for any mod that can push the wattage these coils want.

Why vapers choose this:

• PRO-FOCS coil structure is Uwell's approach to flavour optimisation, and the Valyrian 2 Pro is where it performs best since the chamber and airflow are engineered around it

• Four UN2 coil configurations from single mesh at 90W through to quad mesh at 120W give you a genuine range of performance within the same tank

• Hinged flip cap opens the fill port without unscrewing anything, making top fills fast and clean even at 32mm width

• Self-cleaning technology is patented by Uwell and designed to reduce condensation buildup in the tank's chimney, which keeps the 810 drip tip cleaner for longer

• Spare glass and O-rings in the box mean you have replacement parts on hand from day one, which matters for a tank this wide that lives on top of a high-wattage mod

Uwell Valyrian 2 Pro Replacement Tank Features

PRO-FOCS Is Uwell's Flavour Approach

The name stands for Pro-Flavour Optimised Coil Structure. Rather than just flattening a mesh strip and calling it done, Uwell shaped the coil housing and airflow path around how vapour moves through the chamber after heating. The result is denser flavour at higher wattage without the harshness that some sub-ohm tanks produce above 80W. Worth trying if you have used other sub-ohm tanks and felt the flavour dropped off at higher power.

Four Coil Configurations, One Tank

The UN2 Single at 0.32ohm runs 90-100W. The UN2-2 Dual at 0.14ohm sits at 80-90W. The UN2-3 Triple at 0.16ohm pushes 90-100W. And the FeCrAl Quad at 0.15ohm reaches 100-120W for maximum cloud density. That is a lot of variety from a single coil platform. Most sub-ohm tanks give you two options. This one gives you four.

Hinged Cap, Not a Screw Cap

The flip cap design is genuinely faster than a threaded or slide-open top fill. Pull it open, fill through the port, push it closed. No alignment, no cross-threading, no dripping liquid because the cap came off at a bad angle. One of those small design decisions that makes daily use noticeably better.

Self-Cleaning Chimney

Condensation inside the chimney is a common issue on high-wattage tanks. Uwell patented a self-cleaning system for the Valyrian 2 Pro that channels condensed liquid back down into the tank rather than letting it pool around the drip tip. Does it completely eliminate spit-back? Not entirely. But it reduces it meaningfully compared to tanks without the feature.

810 Widebore for Open Draws

The included drip tip is an 810 widebore. Wide opening, comfortable on the lips, designed for high-volume DTL inhales. If you prefer a narrower draw, any standard 810 drip tip will fit as a replacement. But for the kind of wattage this tank runs at, the stock widebore suits the airflow design well.

Uwell Valyrian 2 Pro Replacement Tank Colours

Three options. All use the same Pyrex glass and stainless steel construction, just different finishes on the metal components:

#buttons

• Black Silver
• Black Red
• Full Black

How to Set Up the Uwell Valyrian 2 Pro Replacement Tank

1. Unscrew the base of the tank and thread a UN2 coil into the base section clockwise until snug. Do not overtighten.

2. Prime the coil by dropping four to five drops of e-liquid onto the cotton through each wicking port and the top opening.

3. Screw the base back onto the tank body and attach the assembled tank to your Vape Mod via the 510 thread.

4. Flip open the hinged top cap and fill through the port with High VG Shortfill or freebase liquid.

5. Close the cap and let the tank stand upright for five to ten minutes. These are thick mesh coils at high wattage, so a proper soak matters.

6. Start at the lowest recommended wattage for your coil and increase gradually over the first handful of draws.

What's in the Uwell Valyrian 2 Pro Replacement Tank Box

• One Valyrian 2 Pro tank in your chosen colour. 

• One 0.32ohm UN2 Single mesh coil. 

• One 0.14ohm UN2-2 Dual mesh coil. 

• One replacement Pyrex glass tube. 

• A pack of spare O-rings. 

• And a user manual. 

That is a generous package for a standalone tank.

Runs on Any High-Wattage 510 Mod in the Uwell Range and Beyond

The Valyrian 2 Pro uses 510 threading and needs a mod capable of reaching at least 80W to drive the lowest-wattage coil in the UN2 range. For the quad coil at 100-120W, you need a dual-battery mod or a high-capacity single-battery device.

The tank runs exclusively on Uwell's UN2 coil series. Four options exist: single, dual, triple, and quad mesh. Two ship with the tank. The others are available as separate purchases. Caliburn coils, Crown coils, and other Uwell Platforms will not fit.

About Uwell

Uwell is known in the UK primarily for the Caliburn pod range. But the Valyrian series is where their sub-ohm engineering lives. The original Valyrian tank was already well-regarded for flavour production, and the Valyrian 2 Pro pushed that further with the PRO-FOCS coil structure and the self-cleaning chimney.

Where the Caliburn targets simplicity and portability, the Valyrian targets performance. Different audience, different approach, same engineering standard. The UN2 coil platform is the backbone of that, offering single through quad mesh configurations from one Vape Tank.

Stock Up and Save

The tank ships with two coils and a spare glass, which is a strong start. But at 80-120W, those coils will not last as long as lower-wattage heads. Adding a pack of UN2 replacements to the order means you are covered for a solid month of daily use.

Every order from Pirate Vapes ships the same day before 4 pm in padded packaging. TPD-compliant stock, age-verified checkout, over-18s only. Free Pirate Post on orders over £25.

Conclusion

The Valyrian 2 Pro is a high-performance sub-ohm tank for vapers who want cloud volume and flavour intensity at 80W and above. Four coil options, a self-cleaning chimney, flip-cap filling, and a spare glass in the box.

Not a tank for beginners, but if you already own a capable mod and want the best flavour Uwell's sub-ohm range can deliver, this is it. Browse more Vape Accessories at Pirate Vapes.

FAQs

What coils does this tank use?

Uwell UN2 series. Four options from single to quad mesh. Two come in the box (0.32ohm single and 0.14ohm dual). The triple and quad are sold separately.

What wattage mod do I need?

80W minimum for the dual coil. 100-120W for the quad. A dual-battery mod is recommended for the higher-wattage coils.

What e-liquid works best?

High VG, 70/30 or above, freebase at 3mg. These coils burn through liquid at high wattage, so thick juice with low nicotine is the way to go. Not suited for nic salts.

How do I refill the tank?

Flip the hinged top cap open, fill through the port, close it. No unscrewing required.

Does the spare glass fit all three colour options?

Yes. Same Pyrex glass tube across every colour. The glass is clear regardless of the metal finish.