SMOK LP1 Replacement Coils

Five coils on one listing, and some of them share a resistance but feel completely different. The LP1 range mixes mesh and DC (dual coil) at 0.8Ω and 1.2Ω, so you can pick the coil type that suits your draw at the same ohm. Mesh runs smoother with softer flavour.

DC runs tighter with more throat and more intensity. There is also a 0.9Ω mesh that splits the difference nicely. All MTL. All press-fit into the Novo 4 pod. All feature SMOK's three-ring leakproof silicone seal. Sold in packs of 5. Pirate Vapes ships them age-verified across the UK.

Why vapers choose this:

• Mesh and DC at the same ohm so you can pick flavour style without changing wattage.

• Three-ring leakproof design keeps the pod sealed and the device clean.

• Five MTL coils covering a range of draw tightness and throat feel.

• Press-fit into the Novo 4 pod, swap in seconds.

• Five to a pack, lasting two to three months of moderate daily use.

SMOK LP1 Replacement Coils Features

Mesh or DC at the Same Resistance

This is the unusual part. Most coil ranges give you one build per resistance. The LP1 gives you two at 0.8Ω and two at 1.2Ω. The DC (dual coil) versions use two small wires for a tighter draw, more throat hit and more concentrated flavour. The mesh versions use a flat strip for a smoother, softer, wider draw. Same pod, same wattage range, genuinely different vape. Worth trying both to find which suits you.

Three Silicone Rings, Zero Leaks

Every LP1 coil has three silicone o-rings stacked around the base. They fill the gap between the coil and the pod wall, which stops juice from leaking down through the airpath and onto the device contacts. In practice, the Novo 4 pod stays remarkably dry compared to older SMOK pods that used to weep onto the battery.

0.9Ω, the Middle Ground

Sitting between the 0.8Ω and 1.2Ω options, the 0.9Ω mesh coil runs best at 15W and delivers a balanced MTL draw that is neither too warm nor too tight. If you are not sure which resistance to try first, the 0.9Ω is a safe starting point. Good throat hit, clean flavour, easy on the battery.

Low Wattage, Long Battery

None of these coils ask for more than 25W, and most run best between 12 and 15W. On a Novo 4 with its 800mAh battery, that kind of efficiency means a full day of moderate use between charges. The 1.2Ω options stretch even further because they sip power at 10 to 15W.

Fits Five SMOK Devices

The LP1 coil presses into pods for the Novo 4, Novo 4 Mini, Nfix Pro, Pozz Pro and RPM 25W. That is five devices on one coil platform, which keeps your spares useful if you own more than one or switch between them. They do not fit the older Novo 2, Novo 3 or Novo X, which all use different coil families.

SMOK LP1 Replacement Coils Resistance Options

No flavour to choose. These are empty coils, you fill the pod with your own juice. Five options.

• 0.8ohm DC MTL coil - dual coil, 12 to 25W, tight draw, intense flavour and strong throat

• 0.8 ohm mesh coil - mesh, best at 12W, smoother draw, softer flavour

• 0.9 ohm mesh coil - mesh, best at 15W, balanced MTL, good all-rounder

• 1.2ohm DC MTL coil - dual coil, 10 to 15W, tightest draw with maximum throat hit

• 1.2 ohm mesh coil - mesh, 10 to 15W, tight but smoother than the DC, strong throat

All five suit 50-50 E-Liquid and nic salts. Avoid thick high-VG juice. Browse our e-liquid collection for the right pairing.

How to Set Up the SMOK LP1 Replacement Coils

1. Remove the pod from your Novo 4 and pull the old coil out of the base.

2. Push the new LP1 coil into the pod until the silicone rings seat and it holds firm.

3. Fill the pod with e-liquid through the side port and let it sit for three to five minutes.

4. Click the pod back onto the device and vape.

What's in the SMOK LP1 Replacement Coils Box

Five coils in whichever variant you choose. No pod, no device, no e-liquid. You will need a Novo 4 empty pod to press them into, and a bottle of nic salt or 50-50 to fill it. Grab a Shortfill if you prefer freebase at lower strength.

Works With the Novo 4 Family and Beyond

The LP1 coil presses into five SMOK devices: the Novo 4, the Novo 4 Mini, the Nfix Pro, the Pozz Pro and the RPM 25W. All share the same pod base and the same press-fit coil connection. They do not fit the Novo 2, Novo 3, Novo X or any other older SMOK pod platform, those use their own coil families entirely. Find the full range in our SMOK Collection and more coils on the coils page.

About SMOK

The Novo 4 was SMOK's move from built-in-coil pods to Replaceable Coils, and the LP1 range is what made that switch worth it. Instead of binning the whole pod when the coil fades, you pull the coil and keep the pod going.

The three-ring leakproof system fixed the condensation issues that plagued older Novo models, and the choice between mesh and DC at the same resistance gives vapers a level of customisation that most pod coils do not offer. For a pocket MTL device, the Novo 4 and its LP1 coils punch well above their size.

Stock Up and Save

Five coils per pack, each lasting one to three weeks. That is a pack every couple of months for most vapers. The 1.2Ω options last longest because they run at the lowest power. Ordering two packs with a few bottles from our Multi-Buy Deals covers you for the season. Genuine SMOK, dispatched tracked, age-verified checkout. Over 18s only.

Conclusion

Five coils. Two build types. Three resistances. The LP1 gives the Novo 4 more range than most pod kits dream of, and the mesh-vs-DC choice at the same ohm means you can tune the draw without changing your wattage.

The three-ring seal keeps the pod dry, the pack lasts months, and the whole thing runs on nic salts at pocket-friendly wattage. Grab a 5-pack from Pirate Vapes with fast, age-verified UK delivery.

FAQs

What is the difference between DC and mesh at the same resistance?

DC uses two small wires for a tighter draw with stronger throat hit and more concentrated flavour. Mesh uses a flat strip for a smoother, softer draw. Same wattage, different feel. Try both at 0.8Ω and see which you prefer.

Will these fit my Novo 2 or Novo 3?

No. The LP1 coils fit the Novo 4, Novo 4 Mini, Nfix Pro, Pozz Pro and RPM 25W only. The Novo 2 and 3 use their own separate coil families.

Which coil for nic salts?

Any of the five work with nic salts. The 1.2Ω mesh is the tightest and smoothest. The 0.8Ω DC MTL gives the strongest throat hit. The 0.9Ω mesh is the balanced middle.

How long does a coil last?

One to three weeks depending on juice and use. Sweet flavours shorten the life. Lighter juices and moderate vaping stretch it. At 10 to 15W these coils do not work hard, so they tend to outlast higher-wattage options.

Can I use high-VG juice?

Not recommended. The wicking ports are small and designed for thinner liquid. High-VG will not saturate fast enough and you will get dry hits. Stick to 50/50 or higher-PG.