Uwell Viscore Pro+ 40K Refill Pods

Twenty flavours and a 0.8ohm mesh coil running at up to 16W. That is a lot of specifications for a prefilled pod. The Uwell Viscore Pro+ Refill Pods each consist of a 2ml prefilled pod and a 10ml e-liquid container that work together to deliver up to 20,000 puffs per set. 

20mg nicotine salt, Uwell's 4-layer leak-proof system, and a twist-and-pull installation that locks the pod securely into the Viscore Pro+ device. This is Uwell applying their engineering reputation to the prefilled pod format, and the build quality reflects it. 

TPD compliant, over 18s only. Browse the full Uwell Range at Pirate Vapes.

Why vapers choose the Viscore Pro+ pods:

• 0.8ohm mesh at 16W is specific enough that Uwell publishes the numbers, and the flavour density at that wattage shows in the draw

• 4-layer leak-proof construction goes beyond a basic silicone seal, which matters for a pod carrying 10ml of liquid in a bag or pocket

• 20,000 puffs per pod set makes each replacement last roughly two to three weeks for moderate daily use, cutting your reorder frequency significantly

• Uwell build quality from the brand behind the Caliburn series carries over into the pod construction and coil consistency

• 20 single-flavour options covering fruit, ice, mint, dessert, and cola profiles give genuine range without relying on dual-flavour gimmicks

Uwell Viscore Pro+ Refill Pods Features

0.8ohm Mesh at 16W. Numbers That Mean Something.

Most prefilled pods do not tell you the coil resistance or wattage. Uwell publishes both: 0.8ohm mesh running at up to 16W. That combination produces a warmer, fuller MTL draw than the typical 1.0ohm or 1.2ohm pods you find in most competitor systems. 

More vapour, more throat presence, and noticeably sharper flavour detail. If you have used a Caliburn G coil at 0.8ohm before, the feel is in the same neighbourhood.

Uwell's 4-Layer Leak-Proof System

Four separate layers of sealing between the liquid and the outside of the pod. Uwell does not break down exactly what each layer does, but the result speaks for itself: a pod that carries 10ml of e-liquid in a sealed container without weeping through seams or ports. That is not a small thing when you are tossing a spare pod into a work bag five days a week.

Twist, Pull, Replace

The Viscore Pro+ uses a twist-and-pull mechanism to swap pods. Twist the old cartridge out, detach the mouthpiece, attach the new refill container, and reinsert. Uwell's setup guide covers it in about eight steps, but the actual process is quicker than it sounds. 

The connection feels engineered rather than friction-fitted, which is what you would expect from the brand. Practically speaking? No wiggle, no misalignment, no accidental disconnection.

ECO and SUPER Modes on the Parent Device

Worth mentioning because it affects how the pod performs. The Viscore Pro+ kit supports two output modes: ECO for extended battery life with lighter vapour, and SUPER for maximum flavour and cloud density. 

You switch between them by tapping the charging port three times within 1.5 seconds. The pod does not change, but the experience does. ECO stretches the 1900mAh battery further. SUPER pushes the 16W output harder. Same pod, two different draws.

A Pod System That Actually Feels Built

PCTG, polycarbonate, and aluminium in the device body. 146g total weight for the kit. These are not plastic-fantastic numbers. The Viscore Pro+ is Uwell's statement that Prefilled Pod Kits can be built to the same standard as their refillable hardware. 

The pods themselves slot into that body with precision, and the overall feel in hand is closer to a Caliburn than a typical Big Puff Vape.

Uwell Viscore Pro+ Refill Pods Flavours List

Twenty flavours across fruit, ice, menthol, dessert, and drink categories. All single-flavour profiles. The range is wider than most prefilled pod systems offer, and includes a few options you rarely see in this format.

#buttons

• Banana Ice
• Blue Razz Lemonade
• Blueberry Cherry Cranberry
• Cherry Cola
• Cherry Ice
• Fresh Mint
• Fruit Mix
• Juicy Peach
• Lemon Lime
• Lemon Mint
• Milky Strawberry
• Mr Blue
• Pineapple Ice
• Pink Lemonade
• Red Apple Ice
• Strawberry Raspberry Cherry
• Triple Mango
• Watermelon Ice
• Watermelon Strawberry
• Blueberry Sour Raspberry

How to Set Up the Uwell Viscore Pro+ Refill Pods

Uwell's installation has a few more steps than most pod systems because of the separate mouthpiece and container assembly. Follow their sequence, and it takes under a minute.

1. Peel the insulating film from the bottom of the new cartridge.

2. Detach the mouthpiece from the cartridge body by pulling it straight upward.

3. Attach the 10ml refill container to the exposed cartridge base until it seats firmly.

4. Reinsert the cartridge with the refill container attached back into the Viscore Pro+ device body.

5. Leave the assembled device upright for about two minutes. The liquid needs time to travel from the container into the pod and fully saturate the 0.8ohm mesh coil before the first draw. Rushing this step results in a dry hit that damages the mesh permanently.

6. Draw gently to vape. The device is inhale-activated. To switch between ECO and SUPER modes, tap the charging port three times within 1.5 seconds.

What's in the Uwell Viscore Pro+ Refill Pods Box

One 2ml prefilled pod in your chosen flavour. One 10ml refill container loaded with 20mg nicotine salt e-liquid. That is one pod set. No device, no cable, no mouthpiece. You need the Uwell Viscore Pro+ Prefilled Vape Kit to use these pods. Browse the Replacement Pods section for compatible options.

The Viscore Pro+ Pod, and Nothing Else

These Vape Pods fit the Uwell Viscore Pro+ Prefilled Vape Kit exclusively. The twist-and-pull connection, cartridge dimensions, and airflow path are all proprietary to Uwell's Viscore system. They will not work in Caliburn kits, Hayati devices, Lost Mary systems, or any other prefilled platform. If your device says Viscore Pro+ on it, you are in the right place.

About Uwell

Uwell made their name with the Caliburn. That series became one of the most widely used refillable pod platforms in the UK, and for good reason: consistent coil quality, solid build, and a draw that satisfied both beginners and experienced vapers. 

The Viscore Pro+ represents Uwell's move into high-capacity prefilled systems, and they have brought the same engineering standards across. 

Published coil resistance, defined wattage output, a 1900mAh battery in the parent kit, dual vaping modes, and a 4-layer leak-proof pod design. The Viscore range is Uwell applying what they learned from years of Caliburn production to the prefilled format.

Stock Up and Save

The Viscore Pro+ system runs on a single pod type, and Uwell does not cross-stock with any other device. That means keeping a spare pod or two at home is the only way to guarantee you are not caught short when the flavour drops off. Grab a few through the Plunder Packs and the per-pod cost comes down. 

Every order from Pirate Vapes ships same day before 4 pm. TPD-compliant stock, age-verified checkout, over 18s only. Spend over £40 and delivery is free with Free Pirate Post.

Conclusion

The Uwell Viscore Pro+ Refill Pods bring genuine hardware credibility to the prefilled pod category. A published 0.8ohm mesh coil at 16W, Uwell's 4-layer leak-proof system, twenty flavours, and a 2ml + 10ml capacity that delivers up to 20,000 puffs per set. 

If you own the Viscore Pro+ kit and want the consistency and build quality that Uwell is known for, these are the only pods that fit. Browse the full Uwell collection and vape accessories at Pirate Vapes.

FAQs

How many puffs do the Viscore Pro+ pods deliver?

Up to 20,000 per pod set. The Viscore Pro+ kit ships with two sets for a combined 40,000, but each replacement pod is sold individually.

What coil is inside the Viscore Pro+ pods?

A 0.8ohm mesh coil running at up to 16W. Confirmed on Uwell's product page. Warmer and fuller than most prefilled pod coils.

Will these Uwell Viscore Pro+ 40K pods fit a Uwell Caliburn?

No. The Viscore Pro+ pods are proprietary to the Viscore Pro+ kit. Completely different connection system from the Caliburn range.

What are ECO and SUPER modes in the Uwell Viscore Pro+ 40K?

Two power settings on the Viscore Pro+ device. ECO extends battery life with a lighter draw. SUPER pushes the full 16W for maximum flavour and vapour. Same pod, different output.

How do I know when the Uwell Viscore Pro+ 40K pod needs replacing?

Flavour will thin out, and vapour production will drop noticeably. Some users also notice a slight staleness in the draw. That means the 10ml container is empty and the mesh coil has reached the end of its lifespan.

Does the Uwell Viscore Pro+ 40K pod leak?

Uwell uses a 4-layer leak-proof system in these pods. As long as you do not detach the pod from the refill container while liquid remains inside, leaking should not be an issue.