Vaporesso Luxe X3 Vape Kit

Vaporesso Luxe X3 Vape Kit

Adjustable power in a pod-sized shell. That is the pitch of the Luxe X3. The wattage runs from 5W to 45W, set by a single button and read off a small 0.8-inch screen.

Behind it sits a 2600mAh battery. Two dual-mesh pods come in the box: a pre-installed 0.6Ω for a restricted mouth-to-lung draw and a 0.4Ω for looser, warmer RDTL vaping. A side slider sets the airflow. You can fire it with the button or just inhale.

The Luxe X3 pod kit takes 2ml top-fill pods in line with UK limits and charges over USB-C. It sits among the more capable devices in our Refillable Pod Kit range.

Why vapers choose this:

• A real 5W to 45W range means the Luxe X3 kit covers cigarette-style MTL and warmer RDTL vaping from one device, rather than locking you to a single draw.

• Two dual-mesh pods included let you run tight or loose out of the box, with no extra purchase needed.

• 0.8-inch display shows wattage, resistance, and battery at a glance, so you always know where the device is set.

• 2600mAh battery carries a full day of use for most vapers before a recharge.

• Side airflow slider fine-tunes the draw without swapping anything.

Vaporesso Luxe X3 Features

Variable 5W to 45W Output

The X3 is a pod kit with the controls of a small mod. Press the button three times to change wattage, and the 0.8-inch screen shows the new setting. Lower wattage keeps the 0.6Ω pod cool and tight. Higher wattage pushes the 0.4Ω pod for more vapour. That spread lets one device follow your mood rather than forcing a fixed style.

Dual Mesh Luxe X Pods

Both pods use dual mesh coils, which spread heat across a wider surface for even, consistent flavour. The 0.6Ω leans towards mouth-to-lung. The 0.4Ω opens up for restricted direct-lung. Because the pods carry the coil, there is no separate coil to screw in, and swapping draw style takes seconds.

Adjustable Side Airflow

A slider on the side of the Luxe X3 pod kit sets how open or restricted the draw feels. Nudge it closed for a tight MTL pull with the 0.6Ω pod. Open it up for the 0.4Ω pod and a softer, airier inhale. It works alongside the wattage, so you can dial in the exact draw you like.

0.8-Inch Digital Display

The screen reports wattage, coil resistance, and remaining battery. For a device this size, that is more feedback than most pod kits give. You can see when the battery is running low and when a pod is reading correctly, which takes the guesswork out of daily use.

Button or Draw Activation

The X3 fires either way. Press the button as you inhale, or leave it and let the auto-draw handle it. Anyone stepping up from a disposable can vape it like one, while button firing suits vapers who prefer the control.

Vaporesso Luxe X3 Colours

The Luxe X3 comes in eight finishes, from plain black to brighter fluid tones. Every colour has the same hardware and the same two pods.

#buttons

• Carbon Black

• Fluid Blue

• Fluid Green

• Fluid Purple

• Gold Silk

• Grey Silk

• Sheer Pink

• Sheer Red

How to Set Up the Vaporesso Luxe X3

1. Charge the device fully over USB-C before first use.

2. Pull the pod out of the battery. It holds in place magnetically.

3. Open the top fill port and add your e-liquid to the 2ml pod, then close it.

4. Seat the pod back into the device until it clicks home.

5. Let a fresh pod stand for three to four minutes so the mesh wicks fully.

6. Press the button five times to switch on, set the wattage to suit the pod, then vape.

What's in the Vaporesso Luxe X3 Box

The kit comes with both pods, so you can run either draw style straight away.

• 1 x Luxe X3 battery device

• 1 x 0.6Ω dual mesh pod (pre-installed)

• 1 x 0.4Ω dual mesh pod

• 1 x USB-C charging cable

• User manual and warranty card

E-liquid is not included, so add a bottle to match the pod you plan to use first.

Pods That Fit the Luxe X3

The Luxe X3 uses the Luxe X pod family. Alongside the 0.6Ω and 0.4Ω pods in the box, it accepts Luxe XR pods, which come in 0.3Ω, 0.6Ω, 0.8Ω and 1.2Ω.

That gives a wide spread of resistances for different strengths and styles, and spares are easy to keep in stock through the Replacement Pods range at Pirate Vapes. Pods from unrelated Vaporesso lines, such as the XROS series, do not fit the X3.

About Vaporesso

The Luxe X line is Vaporesso's answer to vapers who want mod-style control without carrying a mod. The X3 builds on the earlier Luxe X and XR with a wider wattage ceiling, a digital screen and cross-compatible pods across the range.

Vaporesso designs around its dual-mesh pod tech, aiming for steady flavour across a pod's life. It is a well-established name on UK shelves, and its pods sit next to refill-friendly kits like the Vaporesso XROS Range.

Stock Up and Save

Two pods and a low-resistance option mean you will get through liquid, so keeping spare pods and juice in stock makes sense.

Pirate Vapes stocks the Luxe X3 alongside compatible pods and a full Nic Salts Range for the 0.6Ω setup.

Order before 4 pm for same-day dispatch, and Free Pirate Post applies on orders over £40. Every nicotine product is TPD compliant and sold through an age-verified, over-18s checkout.

Conclusion

The Vaporesso Luxe X3 kit is a compact pod device with real wattage control, a digital screen and two dual-mesh pods for tight or loose draws. It suits vapers who want to switch between MTL and RDTL without owning two devices.

Compare it across the Vape Kit Collection, pair it with Vape Accessories, and shop the full range at Pirate Vapes.

FAQs

What pods does the Vaporesso Luxe X3 use?

The Luxe X3 uses the Luxe X pod family. It ships with 0.6Ω and 0.4Ω dual-mesh pods and also accepts Luxe XR pods in 0.3Ω, 0.6Ω, 0.8Ω and 1.2Ω, giving a broad choice of resistances.

Is the Luxe X3 good for mouth-to-lung vaping?

The Luxe X3 handles both styles. Fit the 0.6Ω pod and close the airflow slider for a tighter MTL draw, or use the 0.4Ω pod with more airflow for a warmer RDTL inhale.

How long does the Luxe X3 battery last?

The 2600mAh battery covers a full day of moderate use for most vapers. It recharges over USB-C, and the 0.8-inch screen shows the remaining charge so you can plan a top-up.

What wattage should I run on the Vaporesso Luxe X3?

Run the 0.6Ω pod at the lower end of the 5W to 45W range for a tighter, cooler draw. Move higher up the range for the 0.4Ω pod when you want more vapour and warmth.

Does the Luxe X3 kit have a fire button?

The Luxe X3 fires by button or by draw. You can press the button as you inhale, or leave it and let the auto-draw take over, whichever you prefer.

Is the Vaporesso Luxe X3 TPD compliant?

The Luxe X3 is TPD-compliant in the UK. Its pods hold 2ml in line with the limit, and it is a rechargeable, refillable device rather than a banned single-use vape.