Vaporesso XROS 3 Nano Replacement Pods

Vaporesso XROS 3 Nano Replacement Pods

Four 2ml refillable pods in a pack, built for the entire XROS line and priced to keep your kit running without fuss. Each pod uses a Corex 2.0 mesh coil sealed inside, a magnetic connection that clicks straight into place, and a hidden top-fill port under the mouthpiece.

Stocked here in 0.6ohm, 0.8ohm, 1.0ohm and 1.2ohm, all tuned for a tight MTL draw. Pair them with 50/50 juice or a strong nic salt, and you have a straightforward refill for any Refillable Pod Kit in the XROS family.

Why vapers choose this:

• One pod fits the whole range. Every stocked resistance clicks into any XROS device, from the original XROS through to the newer models, which means you are never hunting for a version-specific part.

• Corex 2.0 mesh heats evenly across the coil for cleaner flavour than older wound-wire pods.

• Top-fill under the mouthpiece keeps refills quick and your fingers clean.

• Four to a pack. Enough to cover most of a month at typical use.

• Magnetic click-in means no threads, no alignment fuss, no cross-threading a worn connector.

Vaporesso XROS 3 Nano Replacement Pods Features

Built-In Corex 2.0 Mesh Coil

No separate coil to buy or seat. Each pod ships with its Corex 2.0 mesh coil built in, sealed against the housing. That keeps maintenance close to zero: when a pod tastes tired, you swap it whole rather than fiddling with tiny replacement heads. For anyone coming off disposables, this is about as low-effort as refillable vaping gets.

Easy Top-Fill Design

Snap off the black plastic mouthpiece, find the red port, squeeze your juice in, and snap it shut. The fill hole sits out of sight when the pod is closed, so there is no exposed silicone bung catching on your pocket. Pair it with a 50/50 E-Liquid and the mesh wicks it through without flooding or dry spots.

0.6Ω to 1.2Ω Pods for Nic Salts

These pods sit in the 0.6ohm to 1.2ohm band, which is MTL territory. That draw suits nic salts well, delivering a firm, smooth hit at 10mg or 20mg without the harsh edge freebase can give at the same strength. Browse the Nic Salts range, and you have a ready match for every pod in the pack.

Transparent Pod Design

The transparent body shows the liquid level at a glance. No guessing, no popping the pod out to check. When it runs low, you top it up before it hits the coil dry, which is the single easiest way to make a pod last its full life.

Four Pods Per Pack

Most daily MTL vapers get somewhere between five days and a fortnight from a single pod, depending on how sweet the juice is and how hard you vape. A pack of four, then, tends to cover three to five weeks. Worth keeping a spare pack in the drawer so you are never caught short.

Vaporesso XROS 3 Nano Pods Resistance Options

Four resistances in the store picker, all Corex 2.0, all MTL. The difference between them comes down to warmth, vapour, and how much throat hit you want.

#buttons

• 0.6 Ohm Corex 2.0 Pod
• 0.8 Ohm Corex 2.0 Pod
• 1.0 Ohm Corex 2.0 Pod
• 1.2 Ohm Corex 2.0 Pod

How to Set Up the Vaporesso XROS 3 Nano Replacement Pods

Quick swap. A couple of minutes, start to finish.

1. Pull the old pod straight out of the device. The magnets release with a firm tug, no twisting needed.

2. Take a fresh pod from the pack and push the black mouthpiece laterally to snap it off the clear pod body, exposing the red top-fill port.

3. Fill with your e-liquid through the red silicone port, keeping to 50/50 juice or nic salts, up to just below the top of the window. Do not put liquid down the centre hole.

4. Snap the black mouthpiece firmly back onto the pod.

5. Click the pod into the device. The magnetic base seats on its own when you line it up.

6. Stand it upright and leave it for a full five to ten minutes so the internal cotton soaks liquid all the way through before your first pull. Skipping this is the quickest way to scorch a new pod.

7. Take two or three gentle draws to finish priming, then vape as normal.

What's in the Vaporesso XROS 3 Nano Replacement Pods Box

Four refillable XROS pods in your chosen resistance. That is the lot. No e-liquid, no device, and no separate coils, since the coil is already built into each pod.

If you need the device itself, the XROS kits sit over in the MTL Vape Kits section.

Made for the Whole Vaporesso XROS Family

These pods are cross-compatible across Vaporesso's XROS platform, one of the most widely used MTL pod systems in the UK. That covers the original XROS, the XROS Mini and Nano, the XROS 2, the XROS 3 series, the XROS Cube, the XROS Pro, and the newer XROS 4, XROS 5, and XROS 6 generations. If your device carries the XROS name and takes a magnetic pod, these fit perfectly. Browse the full Vaporesso Vapes range for the matching kits.

What they will not fit: anything outside the XROS pod platform. Not the Luxe X. Not the GTX tank system. Those run on entirely different pod and coil formats. The 0.4ohm DTL pod is also a separate variant not stocked in this pack, and it only suits the higher-output XROS models in any case.

About Vaporesso

The XROS pod platform is the reason so many UK vapers stay in the Vaporesso ecosystem. One pod design has carried across every XROS generation since launch, which means a device bought two years ago still takes the same pods sold today.

That backwards compatibility is rare in vaping, where manufacturers usually reset the fitment with each new kit. Vaporesso's Corex mesh technology, refined across 2.0 and 3.0, is the other half of the appeal: even heating for consistent flavour. You can see the full pod line-up in the Vape Pods collection.

Stock Up and Save

Pods are a consumable, so it pays to buy ahead. A single pack of four covers most people for the best part of a month, and stacking a couple through our Plunder Packs brings the per-pod price down.

Every order from Pirate Vapes ships same-day when placed before 4 pm, sleeved to protect the pods in transit. All stock is TPD compliant, checkout is age-verified, and sales are strictly over-18s only.

Conclusion

The XROS pods are the simple, reliable refill for one of the UK's most popular MTL platforms. Four 2ml pods, four MTL resistances, built-in Corex mesh, and full cross-compatibility across the XROS range make this an easy repeat purchase.

If you already run an XROS device, a fresh pack keeps it going for weeks. Browse more Refills and Pods and Vape Accessories, or head back to Pirate Vapes to explore the wider range.

FAQs

Which devices do these XROS pods fit?

Every device in the Vaporesso XROS series, from the original XROS to the latest XROS 6 generation (including the Pro, Nano, and Cube models). All stocked resistances use the exact same magnetic base, making them fully cross-compatible.

What e-liquid should I use in the XROS pods?

50/50 VG/PG juice or nic salts at 10mg or 20mg. These are MTL pods, so avoid thick high-VG liquids, which will not wick properly through the mesh.

How many XROS pods come in a pack?

There are four XROS pods in one pack.

Which XROS pod resistance is best to start with?

The 0.8ohm. It is the balanced option in the range and pairs well with most salts and 50/50 juices. Move to 0.6ohm for a warmer draw or 1.2ohm for a tighter, cooler one.

How long does each XROS pod last?

Usually five days to a fortnight with daily use. Sweeter, darker juices gunk the coil faster, so they tend to shorten pod life.

Do I need to buy separate XROS pod coils?

No. The coil is sealed inside each pod. When it wears out, you replace the whole pod rather than a separate coil head.