Vaporesso XROS Mini Pod Kit

Under 10cm tall and 41 grams. The XROS Mini is the smallest device in the Vaporesso XROS family and one of the most compact refillable pod kits on the market. No buttons, no screen, no airflow dial. You fill the pod, you inhale, you vape.

The AXON chip reads the pod resistance and sets the wattage automatically (16W for the 0.8 ohm, 11W for the 1.2 ohm). 1000mAh battery rated at up to 48 hours. Draw-activated. Diamond-patterned aluminium alloy body. Single pod included. Fill with nic salt or 50/50. TPD compliant. Over 18s only.

Why vapers choose the Vaporesso XROS Mini Pod Kit:

• Genuinely pocket-sized. 98.9mm tall, 13.5mm thin, 41 grams. Fits in a coin pocket. Disappears in a jeans pocket. One of the lightest refillable pod kits sold in the UK.

• No buttons, no settings, nothing to learn. Inhale to vape. That is the entire user manual. The AXON chip handles everything else. If you can breathe, you can use it.

• 1000mAh battery rated at up to 48 hours. Bigger battery than a device this small has any right to carry. Most MTL vapers get a full day without thinking about the charger.

• Uses the same pods as every other XROS device. Your pod stash works in the XROS 2, 3, 4, Pro, and every future XROS. Nothing wasted if you upgrade.

• SSS leak-resistant pods that actually work. The EcigClick long-term review reported zero leaks after a week of constant use. Not even condensation.

Vaporesso XROS Mini Pod Kit Features

AXON Chipset with Auto Wattage

No wattage buttons because there is nothing to press. The AXON chip reads the resistance of the installed pod and sets the output: 16W for the 0.8-ohm, 12W for the 1.0-ohm, 11W for the 1.2-ohm. It also handles safety protections: short circuit, low resistance, over-discharge, and over-vaping (cuts off after 8 seconds of continuous draw).

Draw-Activated with Instant Response

Inhale through the mouthpiece and the device fires. No delay. No button. No click-sequence to turn it on. The draw activation responds quickly enough that it feels natural from the first puff. The lack of a fire button means nothing to accidentally trigger in a pocket.

1000mAh Battery with Tri-Colour LED

Green above 70%. Blue between 30% and 70%. Red below 30%. Flashes red when it is time to plug in. The LED glows during each draw so you can check at a glance. Charging takes roughly 90 minutes from flat via USB-C at 1A.

Diamond Pattern Aluminium Alloy Body

The aluminium body gives the XROS Mini a weight and finish that feels more solid than plastic pod kits in the same size class. The diamond pattern across the surface adds grip and prevents the device from sliding on flat surfaces. Compact enough to close your hand around entirely.

SSS Leak-Resistant Pods with Top Fill

Snap the mouthpiece off the pod. Fill port right underneath. Add your liquid, snap the cap back on. The SSS seal system locks liquid in and prevents the base leaking that older pod kits suffered from. Pod holds 2ml with a clear window showing the liquid level.

How to Set Up the Vaporesso XROS Mini Pod Kit

1. Charge. Connect the USB-C cable. The LED flashes red during charging and turns green when full. About 90 minutes from flat.

2. Remove the pod film. Peel off the protective sticker from the pod contacts.

3. Fill. Snap the mouthpiece off the top of the pod. Squeeze your nic salt or 50/50 e-liquid through the fill port up to the line. Press the mouthpiece firmly back on.

4. Prime. Stand the pod upright for five to ten minutes. The mesh coil needs time to soak before your first draw.

5. Insert. Push the pod into the XROS Mini. The magnet clicks it into place. The pod fits either way round.

6. Vape. Inhale through the mouthpiece. The device fires automatically. No button to press.

What's in the Vaporesso XROS Mini Pod Kit Box

The kit ships with:

• the XROS Mini device (aluminium alloy body, 1000mAh battery, AXON chip), 

• one XROS pod (either 0.8-ohm mesh or 1.2-ohm depending on the kit version), 

• a USB-C charging cable, 

• user manual, 

• and warranty card. 

• Only one pod is included, not two. 

Pick up a spare pack of XROS replacement pods from Pirate Vapes so you are not caught short. E-liquid is not included.

The Perfect Fit for Every XROS Replacement Pod

About Vaporesso

Vaporesso launched in 2015 and the XROS Mini sits at the compact end of their most popular product range. The idea behind the Mini is straightforward: the smallest possible body that can still hold a 1000mAh battery and deliver clean MTL flavour.

No features, no complexity, just a Refillable Pod Kit that works when you inhale. All XROS pods fit, so upgrading to an XROS 3, 4, or Pro later costs nothing in wasted pods. Browse the full Vaporesso Vapes collection at Pirate Vapes.

Stock Up and Save

The XROS Mini ships with one pod. One. That covers a week or two. At Pirate Vapes, we recommend grabbing a spare pack alongside the kit so you are not waiting for a delivery when the first pod fades. XROS pods fit every XROS device, so nothing goes to waste if you try a different kit later. All stock is TPD compliant and MHRA-notified. Every order ships tracked from our warehouse.

Conclusion

The XROS Mini does less than any other XROS kit, and that is exactly the point. No screen. No button. No airflow slider. No wattage control. Just a 1000mAh battery, an AXON chip that sets the wattage for you, and a refillable pod in a body that weighs 41 grams and fits in a coin pocket.

For vapers who want the simplest possible refillable MTL Kit, or for anyone looking for a genuinely pocketable backup device, the Mini is hard to beat. Grab one from Pirate Vapes and pair it with your favourite nic salt from our refillable pod kits collection.

FAQs

Is there a fire button?

The XROS Mini is draw-activated only. Inhale and it fires. There is no button for firing, locking, or adjusting anything.

How long does the battery last? 

Vaporesso rates it at up to 48 hours. Most daily MTL vapers get a full day. Light users can stretch to two days.

Can I adjust the wattage?

The AXON chip auto-sets the wattage based on the pod resistance. 16W for 0.8 ohm, 12W for 1.0 ohm, 11W for 1.2 ohm. You cannot override it.

Can I adjust the airflow? 

Not with a slider or dial. There are two small air inlets on the sides of the device. Some users cover one or both with a finger for a tighter draw.

Does the 0.4-ohm pod work in the XROS Mini? 

It physically fits, but the Mini cannot deliver enough power. The 0.4-ohm needs 25-30W to perform properly. The Mini maxes out at 16W. Stick to 0.8, 1.0, or 1.2 ohm.

How many pods come in the box? 

One. Either a 0.8-ohm mesh pod or a 1.2-ohm pod depending on the kit version. Buy spare XROS pods separately.