VooPoo Argus Multi-Ohm Replacement Pods 

Three pods. Three resistances per pod. That is the pitch. The VooPoo Argus Multi-Ohm Replacement Pods pack 0.4-ohm, 0.7-ohm, and 1.0-ohm coils into a single cartridge, so you can switch between MTL and RDL vaping without swapping pods or buying separate packs for each resistance. Flip the pod 180 degrees to toggle between 0.7 and 1.0 ohm. On the Argus G4, double-press the fire button to activate the 0.4-ohm RDL mode.

Top-fill, leak-resistant, 2ml TPD capacity, built-in mesh coils, iCOSM Code 2.0 flavour technology. Compatible with the full VooPoo Argus pod kit family. Sold in packs of 3 at Pirate Vapes. TPD compliant, over 18s only.

Why vapers choose the VooPoo Argus Multi-Ohm Replacement Pods:

• Three resistances in one pod means you stop buying separate packs for different ohm ratings. The 0.4, 0.7, and 1.0-ohm coils are all built into every cartridge. Flip it to switch between 0.7 and 1.0. Double-press the fire button on the Argus G4 for 0.4. One pod covers MTL, balanced, and RDL. That is genuinely useful, not just a marketing line.

• iCOSM Code 2.0 keeps the flavour cleaner for longer than the older Argus V2 pods. The upgraded cotton and multi-core electrode structure heat liquid more evenly, which means you taste your e-liquid properly rather than a gradually worsening burnt note toward the end of the pod's life.

• Top-fill without removing the pod from the device. Peel back the silicone seal on top, fill to the 2ml line, close it. You do not need to pull the pod out, which keeps your hands cleaner and reduces the chance of liquid dripping onto the battery contacts.

• Leak-resistant build that actually works in a pocket. The Liquid-Seal Shield design addresses the biggest complaint about earlier Argus pods. Condensation still happens at the base over time, but actual liquid leaking through the seals is far less common with these than with the older V1 pods.

• Fits the entire VooPoo Argus device family. Whether you own an Argus G4, G4 Mini, G3, G3 Mini, G2, Argus Z2, Argus P2, or Argus Matrix, these pods slot straight in. The 0.4-ohm mode is locked to the Argus G4 series, but the 0.7 and 1.0-ohm settings work across every compatible Argus kit.

VooPoo Argus Multi-Ohm Replacement Pods (3 Pack) Features

Triple Integrated Mesh Coils

Three separate mesh coil elements sit inside a single pod cartridge. The 0.7-ohm and 1.0-ohm coils activate depending on which way the pod is oriented in the device. On the Argus G4, the 0.4-ohm activates via a double button press. Your device reads the coil orientation automatically and adjusts power output to match, so there is nothing manual to configure.

iCOSM Code 2.0 Flavour Technology

VooPoo's second-generation flavour system uses upgraded cotton wicking and a refined electrode structure to keep flavour clean and consistent throughout the pod's lifespan. In practice, this means less flavour degradation toward the final quarter of a pod compared to the older Argus V1 and V2 cartridges. The coil heats liquid more evenly, and the cotton saturates faster after filling.

Top-Fill Leak-Resistant Design

The fill port sits under a silicone seal on the top of the pod. Peel it back, insert your bottle nozzle, fill to the 2ml line, and press the seal closed. You can do this without pulling the pod out of the device on most Argus kits. The Liquid-Seal Shield system beneath the mouthpiece helps keep condensation from pooling around the base contacts.

Magnetic Pod Connection

The pods snap into place via magnetic contacts on the base. The fit is firm enough for daily pocket carry and does not rattle or come loose. Pull straight up to remove when you need to swap or flip the pod for a different resistance. The magnets self-align, so there is no wrong angle to worry about.

Multi-Core Electrode Switching

Instead of carrying three pods at three different resistances, one pod covers all three. The multi-core electrode structure is the hardware that makes this possible. Each orientation of the pod exposes a different coil element to the device's contacts. The switching is physical (flip the pod) rather than digital (no app, no menu), which keeps it simple and reliable.

Best E-Liquids to Pair With the VooPoo Argus Multi-Ohm Pods

These are refillable pods, so you fill them with your own e-liquid. The resistance you run determines what liquid works best. Getting this pairing right makes a noticeable difference to both flavour and pod life.

For 1.0Ω (10-14W, tight MTL):

• Nic salts at 10-20mg are the natural fit here. The tight draw and low wattage mirror how nic salts are designed to be vaped.

• Fruit and menthol nic salts last the longest in coil life terms. Dessert and candy flavours with heavy sweetener burn through mesh coils faster.

• 50/50 VG/PG blends wick properly at this resistance. Do not use high VG (70/30 or thicker) on the 1.0-ohm setting.

For 0.7Ω (14-18W, balanced MTL/RDL):

• The most versatile setting. Works with nic salts at 10mg for a slightly warmer, airier draw, or with 50/50 freebase at 3-6mg for a light RDL experience.

• This is where most Argus Multi-Ohm owners settle for daily use.

For 0.4Ω (18-30W, RDL, Argus G4 only):

• Higher VG Freebase E-Liquids (60/40 or 70/30) at 3-6mg work best here. The higher wattage and open draw produce warmer vapour and larger clouds.

• Nic salts above 10mg are too strong at this wattage for most people. Stick to low-strength or freebase.

Browse Nic Salt E-Liquids and 50/50 E-Liquids at Pirate Vapes for your first fill.

How to Set Up the VooPoo Argus Multi-Ohm Replacement Pods (3 Pack)

1. Open. Peel back the silicone seal on the top of a new pod. If there is a factory sticker or plug, remove it.

2. Fill. Squeeze your chosen e-liquid into the fill port. Fill slowly up to the 2ml line. Do not overfill. Close the silicone seal firmly.

3. Prime. Leave the filled pod sitting upright for five to ten minutes. This lets the mesh coil absorb the liquid fully. The first fill needs the longest soak. Rushing it risks a dry, burnt first draw.

4. Orient. Decide which resistance you want. Flip the pod one way for 0.7-ohm, flip it 180 degrees for 1.0-ohm. If you are using an Argus G4 and want the 0.4-ohm RDL mode, insert the pod in either orientation and double-press the fire button.

5. Insert. Push the pod into the top of your Argus device. The magnets will pull it into place. Give it a light tug to confirm it is seated properly.

6. Vape. Inhale (on draw-activated devices) or press the fire button (on button-activated devices). Your Argus kit reads the pod orientation and sets the wattage automatically.

What's in the VooPoo Argus Multi-Ohm Replacement Pods (3 Pack) Box

Three VooPoo Argus Multi-Ohm pod cartridges (2ml, built-in mesh coils, top-fill, magnetic connection). That is the full contents. No e-liquid is included. No device is included. These are replacement pods only. You need a compatible VooPoo Argus device and your own e-liquid to use them. If you do not already have a kit, check out the VooPoo Argus G4 Pod Kit or the VooPoo Argus G4 Mini Pod Kit at Pirate Vapes.

The Perfect Fit for VooPoo Argus Pod Kits

These Multi-Ohm pods are designed for the VooPoo Argus device family. They fit every current Argus kit, though the 0.4-ohm resistance mode is exclusive to the Argus G4 series.

Full 0.4Ω / 0.7Ω / 1.0Ω support:

• VooPoo Argus G4 Pod Kit

• VooPoo Argus G4 Mini Pod Kit

0.7Ω / 1.0Ω support only:

• VooPoo Argus G3 Pod Kit

• VooPoo Argus G3 Mini Pod Kit

• VooPoo Argus G2 Pod Kit

• VooPoo Argus G2 Mini Pod Kit

• VooPoo Argus Z2 Pod Kit

• VooPoo Argus P2 Pod Kit

• VooPoo Argus Matrix Pod Kit

• VooPoo Argus E40 Pod Kit

• VooPoo Argus A Pod Kit

• VooPoo Argus P1S Pod Kit

Not Compatible:

• VooPoo Vinci pods (different platform entirely)

• VooPoo Drag Nano pods (different fitting)

• VooPoo PnP X pods (different connection)

• Any non-VooPoo pod

• Standard Argus ITO coil pods (different internal structure)

About VooPoo

VooPoo started in 2014 and made their name with the Drag mod series before building out the Argus pod kit family. The Argus range is their biggest seller in the UK now, covering everything from simple draw-activated kits like the Argus Z2 to the fully adjustable Argus G4 with screen, wattage control, and triple resistance switching.

Their iCOSM Code 2.0 coil technology is what powers the Multi-Ohm pods, and it is a genuine step forward from the earlier Argus V1 and V2 cartridges in terms of flavour life and leak resistance. Browse the full VooPoo Vapes collection at Pirate Vapes.

Stock Up and Save

Three pods in a pack last most people three to six weeks, depending on the e-liquid and usage. But if you vape sweet dessert flavours daily, coil life drops and you will go through them faster. Ordering two or three packs alongside your nic salt e-liquids means you are covered for months rather than scrambling for replacements when a coil fades mid-week.

At Pirate Vapes, we pack pods individually to prevent cracking during transit, because a cracked pod is a wasted pod. Every product is TPD compliant, MHRA-notified, and sold through age-verified checkout. Same-day dispatch before 4pm. Free Pirate Post over £25.

Conclusion

If you own any VooPoo Argus pod kit, these Multi-Ohm pods are worth trying. The triple-resistance design means you stop buying separate pod packs for different ohm ratings, and the iCOSM Code 2.0 coil technology is a real improvement over the older Argus cartridges in flavour life and leak resistance.

The 0.7-ohm balanced setting is where most daily vapers land, but having the 1.0-ohm tight MTL and 0.4-ohm RDL modes available in the same pod gives you options without any extra cost or hassle. Grab a pack from Pirate Vapes, pair them with a nic salt from our Refillable Pod Kits collection, and you are sorted for weeks.

FAQs

Do I need to buy a device separately? 

Yes. These are replacement pods only. You need a VooPoo Argus pod kit to use them. The Argus G4, G4 Mini, G3, G3 Mini, G2, Z2, P2, Matrix, E40, A, and P1S all work.

How do I switch between the three resistances? 

For 0.7Ω and 1.0Ω, pull the pod out and flip it 180 degrees, then reinsert. The device reads the orientation and adjusts automatically. For 0.4Ω, you need an Argus G4 or G4 Mini and double-press the fire button.

What e-liquid should I use? 

Nic salts and 50/50 blends for the 0.7-ohm and 1.0-ohm settings. Higher VG freebase (60/40 or 70/30) at the 0.4-ohm setting. Avoid very thick liquids on the 1.0-ohm as they will not wick properly.

Can I replace just the coil inside the pod? 

No. The mesh coils are built in and sealed. When the flavour fades or you get a burnt taste, you replace the entire pod. 

Is the 0.4-ohm mode available on all Argus kits? 

No. The 0.4Ω mode is exclusive to the Argus G4 series. On all other Argus devices, only the 0.7Ω and 1.0Ω settings are accessible. 

Are these the same as the older Argus V2 pods? 

No. The Multi-Ohm pods are a newer design with triple integrated coils and iCOSM Code 2.0 technology. The V2 pods are single-resistance cartridges. These replace the need to carry multiple V2 pod types.