VooPoo Drag 5 Vape Kit

Dual 18650 batteries, 5 to 177W of adjustable power, and VooPoo's GENE TT2.0 chip running the show. The Drag 5 is the latest in a Vape Mod series that has been one of the most recognised names in the kit market for years, and this version brings the upgraded UFORCE-X Tank on the PnP X platform with slide-top filling and dual top airflow. 

Leather and zinc alloy body. Seven colours. Two PnP X mesh coils included in the box: a 0.15ohm for big DTL clouds and a 0.3ohm for a slightly tighter restricted draw. The 2ml TPD-compliant tank ships with a spare glass. Batteries are not included. Over 18s only. Age-verified checkout at Pirate Vapes.

Why vapers choose the Drag 5:

• 177W from dual 18650s gives you headroom most vapers will never fully use, but the option is there for cloud chasers running the 0.15ohm coil wide open. Real power reserve, not a marketing number.

• GENE TT2.0 chipset with four modes covers smart auto-detection, manual RBA, ECO for battery life, and temperature control for consistent draws. One chip, four ways to use it.

• PnP X coil platform runs seven resistances from 0.15ohm to 1.0ohm, which means the same device handles full DTL clouds at 80W and tight MTL draws at 10W depending on which coil you drop in

• C-Frame battery cover pops off cleanly for fast 18650 swaps, and the cover itself is interchangeable if you want a different look down the line

• Slide-top filling on the UFORCE-X Tank lets you refill one-handed by pushing the top cap aside. No threading, no unscrewing, no dripping liquid down the airflow channel

VooPoo Drag 5 Features

GENE TT2.0 Does the Thinking

Four modes built into the chip. Smart mode reads the coil resistance and sets the wattage automatically, which is genuinely useful if you swap between PnP X coils regularly. RBA mode gives you manual control over every setting. ECO mode throttles output to stretch battery life across a full day. TC mode holds a consistent temperature so the flavour stays even from the first draw to the last. Most mod kits ship with two modes at best. Four is not common at this price point.

The UFORCE-X Tank Is a Proper Upgrade

The previous Drag kits used PnP Pod Tanks. The UFORCE-X is a full Sub-Ohm Tank with stainless steel construction, a glass tube, and dual top air intakes that VooPoo designed to prevent leaking while keeping airflow wide. The thing is, top airflow usually means weaker flavour. VooPoo's approach channels air downward over the coil, so you get leak resistance without losing much in the way of taste. The 2ml TPD glass comes with a spare in the box.

That Leather and Zinc Alloy Build

The Drag series has always been about the hand feel. Leather grip panels on a zinc alloy chassis. At 156.58g without batteries, it has genuine weight to it. Not heavy enough to be annoying in a pocket, but enough that it feels like a serious piece of hardware. The leather is treated, not decorative. VooPoo tested the original Drag panels to withstand daily use for over a year before visible wear showed up. Fair to expect similar durability here.

One-Handed Refilling, Finally

Slide the top cap on the UFORCE-X. That is the whole refill process. No screw threading. No removing the tank from the mod. No tilting the device sideways while you try to find the fill port. Push the cap to the side, fill to the line, push it back. One hand. Takes about five seconds. Small thing, but if you refill twice a day, it adds up.

3-in-1 Flip Switch on the Side

A physical switch on the body of the mod handles three functions: lock ignition (prevents accidental firing in your pocket), lock power (keeps wattage fixed so it does not change mid-session), and a quick-switch for immediate vaping readiness. Physical switches feel more reliable than menu-based locking. No five-click sequences to remember.

VooPoo Drag 5 Colours

Seven finishes. All share the same leather grip and zinc alloy frame.

#buttons

• Black
• Gradient Blue
• Gradient Brown
• Green
• Silver
• Sunset Orange
• Sakura Pink

How to Set Up the VooPoo Drag 5

1. Pop the C-Frame cover off the back of the mod by pressing the release catch. Insert two 18650 batteries with the positive and negative terminals matching the markings inside the battery bay. Snap the cover back into place.

2. Screw the UFORCE-X Tank onto the 510 connection on top of the mod. Hand-tight. Do not overtighten or you risk cross-threading the pin.

3. Drop in a PnP X coil. The box includes a 0.15ohm and a 0.3ohm. Push the coil firmly into the base of the tank until it clicks. The 0.3ohm at 32 to 40W is the better starting point if you are new to sub-ohm vaping.

4. Prime the coil by adding three to four drops of e-liquid directly onto the exposed cotton through the top of the coil head. Let the liquid soak in for a few seconds between drops.

5. Slide the top cap open on the UFORCE-X, fill with your chosen e-liquid to just below the max line, and close the cap firmly.

6. Wait a full six minutes. The PnP X coils use a dense cotton pack that needs proper saturation time. Firing too early scorches the cotton permanently, and you will taste burnt wick for the rest of that coil's life. Patience here saves you money.

7. Press the fire button five times to power on. The GENE TT2.0 chip will read the coil resistance and suggest a wattage. Start at the low end of the recommended range and increase gradually.

What's in the VooPoo Drag 5 Box

• The Drag 5 mod with leather panels and C-Frame battery cover. 

• One UFORCE-X Tank with 2ml TPD glass pre-installed. 

• One spare 2ml glass section. 

• One silicone rubber accessory pack. 

• One PnP X 0.15ohm coil. 

• One PnP X 0.3ohm coil. 

• One USB-C charging cable. 

• User manual.

No 18650 batteries. No e-liquid. Pick up a pair of quality 18650 cells from the Vape Batteries section before checkout if you do not already own them.

Built for the Full PnP X Coil Range

The UFORCE-X Tank on the Drag 5 accepts every coil in VooPoo's PnP X lineup. That is seven resistances as of right now, spanning DTL cloud production down to tight MTL draws. Here is what each one does:

• PnP X 0.15ohm: DTL, 60 to 80W. Maximum vapour. Warm, dense clouds.

• PnP X 0.2ohm: DTL, 40 to 60W. Slightly less intense than the 0.15, but still a full DTL experience.

• PnP X 0.3ohm: DTL and RDL, 32 to 40W. The versatile middle ground. Good flavour, moderate cloud, lower battery drain.

• PnP X 0.45ohm: RDL, 25 to 32W. Restricted direct lung. Flavour-focused.

• PnP X 0.6ohm: MTL and RDL, 18 to 23W. Starts to feel like a tighter draw. Works well with slightly higher nicotine.

• PnP X 0.8ohm: MTL, 12 to 16W. Proper mouth-to-lung. Good for 6mg freebase or nic salt at lower strengths.

• PnP X 1.0ohm: MTL, 10 to 13W. The tightest draw available. Closest to a cigarette-style inhale.

Browse the full VooPoo Coil Range to stock up on your preferred resistance. A single PnP X coil handles roughly 100ml of e-liquid before flavour noticeably degrades, according to VooPoo's testing.

About VooPoo

The Drag series is what put VooPoo on the map. The original Drag mod launched in 2017 and quickly became one of the most talked-about dual-battery mods in the vaping community, largely because of the GENE chip's firing speed and the distinctive resin panel design. 

The Drag 5 continues that line with the upgraded GENE TT2.0 chipset and the move to the PnP X coil platform, which VooPoo has standardised across its mod and pod mod range. That standardisation matters because it means coils, tanks, and accessories are interchangeable across a growing number of VooPoo Devices. Buying into the Drag 5 is buying into an ecosystem, not a single product.

Stock Up and Save

The Drag 5 ships with two coils, and the 0.3ohm coil alone should last you through several weeks of moderate use. But once you know which resistance suits your draw style, grabbing a five-pack of PnP X coils means you are covered for months rather than scrambling when the flavour fades. Pair the kit with a bottle of shortfill or freebase e-liquid at 50VG or above, and you are set from day one. 

Every order from Pirate Vapes ships same day before 4 pm with padded, device-safe packaging and full tracking. TPD-compliant stock, age-verified checkout, over-18s only. Free Pirate Post on orders over £25.

Conclusion

The VooPoo Drag 5 is a dual-18650 mod kit built for vapers who want adjustable power, coil flexibility, and a device that feels like it was designed rather than assembled. 5 to 177W, the GENE TT2.0 chip with four modes, and the full PnP X coil range from 0.15ohm to 1.0ohm mean this one kit covers MTL, RDL, and DTL vaping depending on which coil you install. 

Seven colours, leather and zinc alloy construction, and one-handed refilling on the UFORCE-X Tank round it out. Browse the full VooPoo collection, Vape Accessories, and more at Pirate Vapes.

FAQs

Are batteries included with the Drag 5?

No. The Drag 5 requires two 18650 batteries, sold separately. Make sure you buy a matched pair from a reputable brand. Do not mix old and new cells.

What coils come in the Drag 5 kit box?

Two PnP X coils: a 0.15ohm (DTL, 60 to 80W) and a 0.3ohm (DTL and RDL, 32 to 40W). Both are mesh.

Can I use the Drag 5 for MTL vaping?

Yes. Swap the included DTL coils for a PnP X 0.8ohm or 1.0ohm coil, sold separately. The GENE TT2.0 chip auto-adjusts to the lower wattage range, and the draw tightens significantly.

What e-liquid works best with Drag 5?

VooPoo recommends 50VG, 60VG, or 70VG blends at 6mg nicotine or below for the sub-ohm coils. Higher VG produces denser vapour. Thinner 50/50 liquids work better with the higher-resistance MTL coils.

How long does the Drag 5 battery last?

Depends on wattage. At 40W on the 0.3ohm coil, a pair of quality 18650s will last most vapers a full day. At 80W on the 0.15ohm, expect to swap or recharge by mid-afternoon. ECO mode helps stretch things further.

Is the VooPoo Drag 5 tank leak-proof?

The UFORCE-X uses dual top air intakes designed to reduce leaking compared to bottom-airflow tanks. No tank is completely leak-proof, but top airflow significantly cuts the risk. Keep the device upright when not in use.