Voopoo MAAT Replacement Tank

Twenty-six millimetres wide, built from stainless steel and Pyrex, and designed around Voopoo's Volcano Crater airflow system. The MAAT Tank is a 2ml TPD-compliant sub-ohm tank with a 510 base that fits most regulated Vape Mods on the market. Two TPP mesh coils come in the box: a 0.2ohm TPP-DM2 for 40-60W and a 0.15ohm TPP-DM3 for 80-100W.

Top-fill screw cap, adjustable airflow, replaceable glass section, and an 810 wide-bore drip tip for open DTL draws. If you run any device with a 510 thread and want a DTL Tank that takes the full TPP coil range, the MAAT is built for that.

Why vapers choose the MAAT Tank:

• Volcano Crater airflow engineering channels air through the tank with 60% less resistance than conventional sub-ohm designs, and it drains condensate into an isolated chamber at the base so liquid stays off the mod connection

• Full TPP coil compatibility means four dedicated mesh coil options from 0.15ohm up to 0.3ohm, each tuned for a different DTL style

• Replaceable Pyrex glass keeps the tank repairable rather than disposable, and medical-grade Pyrex handles temperature and corrosion without cracking under normal use

• Screw cap top fill that stays sealed during transport. No accidental openings in bags or pockets.

• Two coils in the box covering a 40-100W range, so you can test both a moderate and a high-power draw before buying replacements

Voopoo MAAT Replacement Tank Features

Volcano Crater Airflow is the Whole Point

Most sub-ohm tanks push air through a single channel at the base. The MAAT uses what Voopoo calls a Volcano Crater structure: a dual-pathway system that feeds air from two directions simultaneously. The practical result is a noticeably easier DTL inhale with denser vapour at the same wattage compared to single-path designs. The crater shape also acts as a condensate trap, draining any liquid that collects during use into an isolated chamber below the coil. That keeps moisture off the 510 pin and away from your mod's connection plate.

Why Dual In One Tech 2.0 Matters for Coil Life

Voopoo's Dual In One Tech 2.0 refers to the mesh construction inside each TPP coil. The mesh layer is shaped to distribute heat more evenly across the full surface area, which reduces hotspots. Fewer hotspots means the cotton behind the mesh degrades more slowly. In practice, you get a longer stretch of clean flavour before that burnt, sweet aftertaste signals a coil change. The tech runs across all four TPP coil options, not just the two in the box.

Screw Cap, Not Slide

Slide-to-fill caps can pop open in bags, coat pockets, or anywhere pressure shifts. The MAAT uses a threaded screw cap instead. Twist to open, fill, twist to close. It is a small detail, but it is the difference between a clean pocket and an e-liquid stain. Worth mentioning: the fill port is wide enough for most bottle nozzles, including shortfill bottles with larger tips.

810 Drip Tip for Open Draws

The included 810 wide-bore drip tip suits the airflow design. Wide bore means more air volume per draw, which pairs naturally with the sub-ohm coils running at 40W and above. If you prefer a slightly different feel, any standard 810 drip tip fits. Browse Drip Tips and Mouthpieces for alternatives.

Stainless Steel That Earns Its Keep

The outer shell is stainless steel with corrosion resistance built for daily use. No paint to chip. No plastic to crack if it rolls off a desk. The Pyrex glass section in the middle is replaceable, so a single drop does not mean a new tank, just a new glass. That is a running cost difference worth noting over sealed tank designs.

Voopoo MAAT Replacement Tank Colours

Two finishes. Both use the same stainless steel construction with a colour-matched finish.

#buttons

• Silver
• Gunmetal

How to Set Up the Voopoo MAAT Replacement Tank

New tank, fresh coils, a few minutes of patience.

1. Unscrew the base of the MAAT Tank from the glass section. The TPP coil pushes into the base with a press-fit connection. Remove any protective packaging from the coil.

2. Take the 0.2ohm TPP-DM2 or 0.15ohm TPP-DM3 coil from the box. Apply four to five drops of e-liquid directly onto the exposed cotton ports on the side and top of the coil. Spread the liquid across each visible cotton window.

3. Press the primed coil firmly into the base until it clicks into place. Reassemble the tank by screwing the glass section back onto the base.

4. Unscrew the top cap and fill with your preferred High-VG E-liquid through the fill port. Leave a small air gap below the rim.

5. Screw the cap closed and stand the filled tank upright for six to seven minutes. The DM2 and DM3 coils both use dense mesh wicking that needs adequate time to absorb liquid through every layer. Rushing this step chars the cotton on the first fire.

6. Attach the tank to your mod via the 510 connection. Start at the lower end of the coil's wattage range and increase gradually over the first few draws.

What's in the Voopoo MAAT Replacement Tank Box

• The MAAT Tank with replaceable Pyrex glass section, 

• an 810 drip tip, 

• one 0.2ohm TPP-DM2 coil, 

• one 0.15ohm TPP-DM3 coil, 

• and a user manual. 

No e-liquid, no mod, no spare glass, no additional coils beyond the two included.

The Sub-Ohm DTL Tank for Voopoo's TPP Coil Ecosystem

The MAAT Tank runs on Voopoo's entire TPP coil range, which currently includes four resistances. The TPP-DM1 at 0.15ohm (60-80W) leans towards sweetness. The TPP-DM2 at 0.2ohm (40-60W) balances density and flavour richness. The TPP-DM3 at 0.15ohm (80-100W) pushes output higher for bigger clouds. The TPP-DM4 at 0.3ohm (32-40W) dials things back for a softer, more delicate draw at lower wattage. All four are Voopoo Coils that press-fit into the same base.

This tank does not accept PnP coils, GTX coils, or any other coil platform. TPP only. If the coil does not say TPP on the packaging, it will not fit.

About Voopoo

The TPP coil platform is one of Voopoo's most widely adopted systems, running across multiple tanks and pod kits in the Drag and VINCI ranges. The MAAT Tank sits in the VINCI series but shares its coil base with tanks packaged alongside the Drag S2, Drag X2, and ARGUS GT II among others. That cross-device compatibility is deliberate.

Voopoo builds around coil ecosystems rather than locking each device to a proprietary cartridge, which means swapping between Voopoo Devices does not mean starting over with a new coil type every time.

Stock Up and Save

Two coils in the box get you started, but at daily DTL use you will want a spare pack within a couple of weeks. Grabbing a set of Replacement Vape Coils alongside the tank means you are covered for the first month without a second order. A spare Pyrex section is worth adding too, because glass does break.

Every order from Pirate Vapes ships the same day before 4 pm with padded, device-safe packaging. TPD-compliant stock, age-verified checkout, over 18s only. Spend over £25 and delivery is on us with Free Pirate Post.

Conclusion

The MAAT Tank is a straightforward sub-ohm DTL tank built around Voopoo's TPP coil ecosystem. Volcano Crater airflow, stainless steel and Pyrex construction, two mesh coils in the box, and a 510 connection that fits the vast majority of regulated mods. If you already use TPP coils on another device, this tank gives you a second option without buying new consumables.

If you are new to Voopoo, the included DM2 and DM3 coils cover a 40-100W range that suits most DTL preferences out of the box. Browse the full range of vape accessories and Vape Tanks at Pirate Vapes.

FAQs

What coils fit the MAAT Tank?

All Voopoo TPP coils. Four options currently: TPP-DM1 (0.15ohm, 60-80W), TPP-DM2 (0.2ohm, 40-60W), TPP-DM3 (0.15ohm, 80-100W), and TPP-DM4 (0.3ohm, 32-40W). PnP coils do not fit. GTX coils do not fit. TPP only.

Does the MAAT Tank work with any mod?

Any regulated mod with a 510 connection that outputs at least 32W. For the included coils, you want a mod capable of 60-100W to use both comfortably.

What e-liquid ratio works best?

High-VG blends. 70/30 or 80/20 VG/PG is ideal. The sub-ohm mesh coils wick thick liquids well, and higher VG produces denser clouds. Avoid high-PG or 50/50 liquids in this tank. They are too thin for these coils and will flood the airflow.

Is the glass replaceable?

Yes. The Pyrex section unscrews from the tank body. Replacement glass is available separately.

How long do the TPP coils last?

Two to three weeks with daily use and unsweetened e-liquid. Heavy sweetener in your juice shortens coil life significantly. You will taste the difference when it is time to swap.

What is the UK capacity?

2ml under TPD regulations. The international version holds 6.5ml, but only the 2ml configuration is sold in the UK.